VIVO Electric Standing Desk 1B Series (DESK-KIT-1B6C-30) User Manual

Zavedení

This manual provides instructions for the VIVO Electric Standing Desk, Model DESK-KIT-1B6C-30. This desk is designed to offer a versatile and ergonomic workspace, allowing users to easily switch between sitting and standing positions.

• Active Standing: Transition smoothly from sitting to standing for comfortable viewúhly nastavení a přizpůsobené výšky uživatelů.
• Spacious 3-Piece 59” Top: A 59” x 29.5” surface with extra depth for monitors, accessories, and supplies. The desktop is made of particle board for a scratch-resistant surface.
• Výkonný elektromotor: Enjoy a height range of 29.2” to 48.4” with precise telescopic height adjustment.
• Silná podpora rámu stolu: All-steel construction supports up to 220 lbs, ensuring stability for various setups.
• Řadič paměti: Easy-to-use push-button controller with 4 memory presets to save desired heights.

Bezpečnostní informace

Please read and understand all instructions before use. Failure to follow these instructions may result in injury or damage to the product.

• Do not exceed the weight capacity of 220 lbs to ensure stability and safety.
• Ensure all cables are managed to prevent pinching or entanglement during height adjustments.
• Keep children and pets away from the desk during operation to avoid injury from moving parts.
• Ensure there are no obstructions above or below the desk when adjusting height.

Obsah balení

The VIVO Electric Standing Desk (Model DESK-KIT-1B6C-30) includes the following components:

• Černý elektrický jednomotorový rám stolu
• Light Wood 60" x 30" Table Top (3-piece design)
• Memory Controller
• Assembly Hardware and Tools (as specified in the included manual)

Figure 1: The VIVO Electric Standing Desk ships in two separate boxes, typically containing the table top and the frame components.

Nastavení a montáž

Assembly of the VIVO Electric Standing Desk is required. It is recommended to follow the detailed instructions provided in the included physical manual. Key steps involve:

1. Vybalte všechny součásti a ověřte je podle seznamu dílů.
2. Sestavte rám stolu a ujistěte se, že jsou všechny šrouby bezpečně utažené.
3. Attach the three-piece table top to the assembled frame. Ensure proper alignment for a seamless surface.
4. Install the memory controller to the underside of the desk.
5. Connect all necessary cables for the electric motor and controller.
6. Zapojte stůl do elektrické zásuvky.

Návod k obsluze

The VIVO Electric Standing Desk features an intuitive memory controller for easy height adjustment.

Základní nastavení výšky

• Použijte Nahoru (^) a Dolů (v) arrow buttons on the controller to manually adjust the desk height.
• Aktuální výška se zobrazí na LED displeji.
• The desk offers a height range of 29.2 inches (minimum) to 48.4 inches (maximum).

Předvolby paměti

The controller allows you to save up to 4 preferred height settings:

1. Nastavte stůl do požadované výšky pomocí tlačítek Nahoru/Dolů.
2. Stiskněte tlačítko „M“ button (Memory) once. The LED display will flash.
3. Okamžitě stiskněte jedno z očíslovaných tlačítek předvoleb (1, 2, 3 nebo 4) pro uložení aktuální výšky do dané předvolby.
4. Chcete-li vyvolat uloženou výšku, jednoduše stiskněte odpovídající očíslované tlačítko předvolby. Stůl se automaticky přesune do uložené polohy.

Figure 2: The memory controller with LED display and preset buttons for convenient height adjustment.

Figure 3: The VIVO Electric Standing Desk offers a wide height range to accommodate both sitting and standing preferences.

Údržba

Regular maintenance ensures the longevity and optimal performance of your VIVO Electric Standing Desk.

• Čištění: Otřete povrch pracovní plochy měkkým,amp cloth. Avoid abrasive cleaners that may damage the laminated finish.
• Správa kabelů: Periodically check and organize cables to prevent tangling or damage, especially around moving parts of the desk frame.
• Kontrola upevňovacích prvků: Occasionally inspect all screws and bolts to ensure they remain tight. Retighten if necessary.
• Nosnost: Adhere to the maximum weight recommendation of 220 lbs to prevent strain on the motor and frame.

Odstraňování problémů

If you encounter issues with your VIVO Electric Standing Desk, refer to the following common troubleshooting steps:

• Stůl se nehýbe:
  • Zkontrolujte, zda je napájecí kabel bezpečně zapojený do stolu i do zásuvky.
  • Ensure there are no obstructions preventing the desk from moving up or down.
  • If the controller displays an error code, consult the full manual for specific error resolution.
• Nerovnoměrná výška:
  • Perform a reset procedure (refer to your full manual for specific steps).
  • Ensure the desk is on a level surface. Adjust the leveling feet if necessary.
• Neobvyklé zvuky:
  • Minor motor sounds are normal during operation.
  • If noises are loud or unusual, check for loose fasteners or obstructions.

For persistent issues, please contact VIVO Customer Support.

Specifikace

Záruka a podpora

VIVO offers a Limited Warranty for this product. For detailed warranty information, please refer to the documentation included with your purchase or visit the official VIVO webmísto.

For any questions, technical assistance, or support, please contact VIVO Customer Support. Our US-based team is available to assist you.

• Zásady vrácení: 30denní snadné vrácení.
• Zákaznická podpora: K dispozici pro pomoc s dotazy k produktům a řešením problémů.

Figure 4: VIVO provides dedicated US-based customer support for all products.