Zavedení
The Progress Lighting Standby 7.75 inch Surface Mount LED Motion Sensor Light with Photocell is an advanced lighting solution designed for efficiency and convenience. This fixture integrates motion-sensing technology with energy-saving features, making it suitable for various residential and commercial applications. It activates upon motion detection and includes a photocell to ensure operation only when ambient light is insufficient, optimizing energy use.
Klíčové vlastnosti:
- Dual technology motion detection for reliable activation.
- Integrated PIR motion sensor turns light on within a 12-15 ft radius.
- Photocell sensor prevents activation during daylight hours (triggers below 12 lux).
- Automatic shut-off after 30 seconds of no motion.
- Energy-efficient LED technology with 3000K warm light and 90 CRI.
- Dimmable when used with a compatible wall dimmer.
Obrázek 1: Přední strana view of the Progress Lighting Standby LED Motion Sensor Light.
Figure 2: The light fixture installed in a laundry room, demonstrating its application.
Bezpečnostní informace
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení jističem nebo pojistkovou skříní.
- Ensure all electrical connections are made according to local codes, ordinances, and the National Electric Code (NEC).
- Ověřte, že zásoba objtage is correct by comparing it with the luminaire information.
- Nepokoušejte se žádným způsobem upravovat svítidlo.
- This fixture is designed for indoor use. While it has some resistance, it is not fully water resistant.
Obsah balení
Pečlivě vybalte svítidlo a zkontrolujte, zda jsou dodávány všechny díly. Pokud některé díly chybí nebo jsou poškozené, nepokoušejte se výrobek sestavit ani instalovat. Pro pomoc kontaktujte zákaznický servis.
- LED Motion Sensor Light Fixture
- Mounting Hardware (bracket, screws, wire nuts)
- Návod k použití
Obrázek 3: Rozložené view of the light fixture with included mounting hardware.
Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | P810041-028-30 |
| Rozměry (D x Š x V) | 7.72 cm x 7.72 cm x 1.38 cm |
| Materiál | Alloy Steel, Polycarbonate (Shade) |
| Barva | Saténová bílá |
| Světelný zdroj | Integrovaná LED |
| Wattage | 14 wattů |
| svtage | 120 voltů |
| Jas | 950 XNUMX lumenů |
| Teplota barev | 3000K (teplá bílá) |
| Index podání barev (CRI) | 90 |
| Kontrolní metoda | Motion Sensor, Photocell |
| Typ instalace | Povrchová montáž |
| Vnitřní/venkovní použití | Krytý |
| Úroveň odolnosti proti vodě | Není odolný vůči vodě |
| Osvědčení | Seznam UL |
Figure 4: The fixture features integrated LED technology and is dimmable with compatible wall dimmers.
Nastavení a instalace
Follow these steps to properly install your LED motion sensor light. Ensure power is disconnected at the circuit breaker before starting.
- Připravte instalační prostor: Turn off power at the main circuit breaker. Ensure the mounting surface is clean and dry.
- Připevněte montážní držák: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is firmly attached.
- Proveďte elektrické připojení: Connect the fixture's wires to the corresponding house wires. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use the provided wire nuts and ensure connections are secure.
- Namontujte přípravek: Align the fixture with the mounting bracket and secure it in place. Refer to the installation sequence diagram for visual guidance.
- Obnovit napájení: Jakmile je svítidlo bezpečně namontováno a všechna připojení provedena, obnovte napájení jističem.
Obrázek 5: Zpět view of the light fixture, showing the wiring for installation.
Figure 6: Installation sequence diagram, showing how the light attaches to the junction box.
Návod k obsluze
The Standby LED Motion Sensor Light is designed for automatic operation based on motion and ambient light levels.
- Pohybový senzor: The built-in Passive Infrared (PIR) sensor detects movement within its range. When motion is detected, the light will activate. The detection radius is approximately 12 feet when mounted at 8 feet height, and 15 feet when mounted at 10 feet height.
- Senzor fotobuňky: The integrated photocell ensures that the light only turns on when the ambient light level is below 12 lux (i.e., when it's dark enough). This prevents unnecessary activation during daylight hours, conserving energy.
- Automatické vypnutí: After motion is no longer detected, the light will remain on for approximately 30 seconds before automatically turning off.
Figure 7: Close-up of the integrated motion sensor on the light fixture.
Figure 8: Diagram illustrating the motion detection angle and radius of the light fixture in a room.
Údržba
Regular maintenance helps ensure the longevity and optimal performance of your light fixture.
- Čištění: Před čištěním svítidla se ujistěte, že je vypnuté napájení. Otřete měkkým, suchým nebo lehce navlhčeným hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo elektrické součástky.
- LED diody: Integrovaný LED světelný zdroj je navržen pro dlouhou životnost a není uživatelsky vyměnitelný.
- Inspekce: Periodically check for any loose wiring or damage. If any issues are found, disconnect power and consult a qualified electrician.
Odstraňování problémů
Pokud máte problémy se svítidlem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power, incorrect wiring, photocell detecting too much ambient light, motion sensor not triggered. | Check circuit breaker. Verify wiring connections. Ensure ambient light is below 12 lux. Test motion sensor by moving within its range. |
| Světlo svítí nepřetržitě. | Constant motion detected, wiring issue. | Ensure no continuous motion is within the sensor's range. Check wiring for proper connections. |
| Světlo bliká. | Loose wiring, incompatible dimmer switch. | Check all wiring connections. Ensure a compatible LED dimmer switch is used if dimming functionality is desired. |
| Dosah pohybového senzoru je slabý. | Obstructions, incorrect mounting height. | Odstraňte všechny překážky z dosahu senzoru view. Verify mounting height is within recommended range (8-10 ft). |
Pokud tyto kroky problém nevyřeší, kontaktujte prosím zákaznickou podporu.
Záruka a podpora
Informace o záruce: All products purchased have a 30-day replacement parts policy to ensure a fully working item. All products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped. The warranty covers all items and conditions identified in the original manufacturer's warranty. Items specifically not covered by the warranty include loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
Zákaznická podpora: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. You can find contact information on the official Progress Lighting website or through your Amazon purchase history.
Online zdroje: For additional information, product updates, and FAQs, visit the Obchod s osvětlením Progress na Amazonu.
