HOFTRONIC Universal LED Dimmer 3-200W Instruction Manual

1. Úvod

Thank you for choosing the HOFTRONIC Universal LED Dimmer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new dimmer. Please read these instructions carefully before installation and retain them for future reference.

2. Bezpečnostní informace

• Elektrické nebezpečí: Installation must be performed by a qualified electrician or competent person in accordance with national wiring regulations.
• Odpojit napájení: Always switch off the main power supply at the fuse box/circuit breaker before commencing any electrical work.
• svtage: This dimmer is designed for 230V AC systems. Ensure your electrical supply matches this requirement.
• Kompatibilita zatížení: Only connect LED loads within the specified range of 3W to 200W. Exceeding this load can damage the dimmer and connected lights.
• Pouze pro vnitřní použití: Tento výrobek je určen pro použití v suchých vnitřních prostorách.
• Děti: Uchovávejte obalové materiály a malé součásti mimo dosah dětí.

3. Obsah krabice

Před instalací ověřte, zda jsou všechny komponenty přítomny:

This image displays the typical contents of the product box, including the HOFTRONIC LED dimmer module, a white cover plate, and an adapter set for compatibility with various switch frames.

• 1x HOFTRONIC Universal LED Dimmer (Model 2717551)
• 1x White Cover Plate
• 1x Adapter Set

4. Nastavení a instalace

The HOFTRONIC LED dimmer is designed for easy installation using a 2-wire system and is compatible with most standard flush and surface-mounted wall boxes. It also supports various cover materials from brands like Gira, Berker, Peha, Jung, and Busch Jaeger using the provided adapter set.

4.1 kroky instalace

1. Připravte se na instalaci:
   • Ensure the main power supply to the circuit is switched off at the fuse box/circuit breaker.
   • Remove the existing switch or dimmer from the wall box.
2. Připojení kabeláže:
   

   This image illustrates the process of connecting the dimmer module's wiring into a standard wall box. The dimmer is held by hand while a screwdriver is used to secure the wires.

   • Identify the live (L) and switched live (L1/L2) wires.
   • Connect the wires to the corresponding terminals on the dimmer module. Refer to the wiring diagram printed on the dimmer for precise connections.
   • The dimmer supports a 2-wire connection.
3. Mount the Dimmer Module:
   • Carefully push the wired dimmer module into the wall box.
   • Secure the module using the screws provided or the existing screws from the wall box.
4. Install Cover Plate and Knob:
   

   This image shows the individual components of the dimmer assembly: the dimmer module, the mounting frame, the decorative cover plate, and the rotary knob. These parts are assembled to complete the installation.

   • Attach the mounting frame (if applicable) and then the decorative cover plate.
   • Use the adapter set if necessary to ensure compatibility with your chosen switch frame.
   • Place the rotary knob onto the dimmer shaft.
5. Obnovit napájení:
   • Once installation is complete and all components are securely in place, restore power at the fuse box/circuit breaker.
   • Test the dimmer functionality.

Dimmer Module Dimensions

Cover Plate Dimensions

5. Návod k obsluze

The HOFTRONIC Universal LED Dimmer provides smooth and silent dimming for compatible LED lamps from 3W to 200W.

• Zapnutí/vypnutí: Press the rotary knob to switch the connected lights ON or OFF.
• Stmívání: Rotate the knob clockwise to increase brightness and counter-clockwise to decrease brightness.
• Tichý provoz: This dimmer utilizes trailing edge technology for silent operation, preventing buzzing and flickering with compatible LED lights.
• Minimum Brightness Adjustment (MIN): The dimmer features a minimum brightness adjustment screw (often labeled "MIN"). If your lights flicker at low settings or do not dim low enough, you can adjust this screw with a small screwdriver to set the optimal minimum brightness level.

Tento obrázek poskytuje detailní view of the dimmer module, highlighting the "MIN" adjustment screw which allows users to fine-tune the minimum brightness level for optimal performance with various LED lamps.

6. Údržba

The HOFTRONIC LED Dimmer requires minimal maintenance.

• Čištění: To clean the dimmer's surface, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• Žádné díly opravitelné uživatelem: There are no user-serviceable parts inside the dimmer module. Do not attempt to open or repair the unit.

7. Řešení problémů

If you experience issues with your dimmer, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact HOFTRONIC customer support.

8. Specifikace

9. Záruka a podpora

HOFTRONIC products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty information provided with your purchase or visit the official HOFTRONIC webstránky pro podrobnosti.

For technical support, troubleshooting assistance, or warranty claims, please contact HOFTRONIC customer service through their official channels. Have your model number (2717551) and purchase date ready when contacting support.