1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras AMT 8000 PRO Wireless Alarm Control Panel. The AMT 8000 PRO is a state-of-the-art security solution designed for robust protection and maximum connectivity, featuring wireless communication, app monitoring, and extensive zone management capabilities.
2. Klíčové vlastnosti
- Bezdrátové připojení: Fully wireless solution, ensuring clean installation without extensive wiring.
- Rozsáhlé pokrytí: Wireless range of up to 1000 meters in open areas.
- Integrovaná siréna: Built-in siren with sound spreading technology to deter intruders and prevent easy localization.
- Easy Device Registration: External button for convenient registration of wireless devices, eliminating the need to open the control panel.
- Flexibilní komunikace: Supports Ethernet/Wi-Fi, GPRS, 3G, and 4G connections (with compatible modules).
- Integrovaný Wi-Fi modul: Allows direct connection to wireless internet networks.
- Vysoká kapacita: Supports 64 zones, 16 independent partitions, 16 keypads, up to 98 remote controls, and 16 external sirens.
- Monitorování aplikací: Monitor and control the system via a mobile application.
- Repeater Support: Compatible with up to 4 repeaters for extended wireless coverage.
3. Obsah balení
Upon opening the package, verify that all components are present and in good condition. The standard package for the Intelbras AMT 8000 PRO typically includes:
- Intelbras AMT 8000 PRO Alarm Control Panel
- Napájecí adaptér (drátový elektrický)
- Mounting Hardware (Screws, Wall Plugs)
- Uživatelská příručka (tento dokument)
Note: Additional accessories such as remote controls, keypads, and sensors are sold separately.
4. Nastavení a instalace
4.1. Výběr místa instalace
Select a central location within the protected area, away from direct sunlight, heat sources, and excessive moisture. Ensure the location allows for optimal wireless signal propagation to all sensors and devices. The unit is designed for wall mounting.
Image: Intelbras AMT 8000 PRO mounted on a wall, illustrating a typical installation scenario.
4.2. Mounting the Control Panel
- Carefully open the control panel casing.
- Using the backplate as a template, mark the drilling points on the wall.
- V případě potřeby vyvrtejte otvory a vložte hmoždinky.
- Secure the control panel to the wall using the provided screws.
Obrázek: Zadní view of the Intelbras AMT 8000 PRO, showing the mounting holes and connection terminals for wired power and other components.
4.3. Připojení napájení
Connect the provided power adapter to the control panel's power input. Ensure the power source is stable and meets the panel's requirements. The system operates on wired electric power.
4.4. Network Connection (RJ45 / Wi-Fi)
The AMT 8000 PRO offers flexible network connectivity:
- RJ45 (Wired Ethernet): Connect an Ethernet cable from your router to the RJ45 port on the control panel for a stable wired internet connection.
- Wi-Fi (Wireless): The integrated Wi-Fi module allows connection to your wireless network. Refer to the mobile application's setup guide for Wi-Fi configuration steps.
Image: The Intelbras AMT 8000 PRO with a Wi-Fi signal icon above it, indicating its wireless connectivity capabilities.
4.5. Registrace zařízení
To register wireless devices (sensors, keypads, remote controls), use the external registration button on the control panel. Follow the specific instructions provided with each wireless device for pairing. The system supports up to 64 zones, 16 keypads, and 98 remote controls.
5. Obsluha systému
5.1. Ovládání mobilních aplikací
The primary method of control for the AMT 8000 PRO is through its dedicated mobile application. Download the Intelbras security app from your device's app store. Once installed, follow the in-app instructions to connect to your alarm panel.
- Aktivace/deaktivace: Use the app to arm the entire system or specific partitions (up to 16 independent partitions).
- Stav zóny: View the real-time status of all 64 zones.
- Záznam událostí: Access a history of system events and alarms.
- Správa uživatelů: Add or remove users and assign access levels.
- Nastavení systému: Configure various system parameters, including siren volume, entry/exit delays, and notification preferences.
5.2. Ovládání pomocí klávesnice
If keypads are installed (up to 16 supported), they provide an alternative method for arming, disarming, and checking system status. Refer to the keypad's specific manual for detailed operation instructions.
5.3. Dálkové ovládání
Remote controls (up to 98 supported) offer quick arming and disarming functions. Press the designated buttons to activate or deactivate the alarm system.
5.4. Integrated Siren
The control panel features an integrated siren that activates upon an alarm event. Its sound spreading technology helps to disorient intruders and makes it difficult to locate the panel by sound alone.
6. Údržba
Regular maintenance ensures the optimal performance and longevity of your Intelbras AMT 8000 PRO system.
- Čištění: Use a soft, dry cloth to clean the exterior of the control panel. Do not use abrasive cleaners or solvents.
- Battery Check (for wireless devices): Periodically check the battery status of all connected wireless sensors, keypads, and remote controls via the mobile application. Replace batteries as indicated by low battery warnings.
- Test systému: Conduct a full system test at least once a month. This includes testing all sensors, the siren, and communication with the monitoring center (if applicable).
- Aktualizace firmwaru: Check for and install any available firmware updates for the control panel via the mobile application to ensure the latest features and security enhancements.
7. Řešení problémů
This section addresses common issues you might encounter with your AMT 8000 PRO system.
| Problém | Možná příčina | Řešení |
|---|---|---|
| System not responding to app commands. | No internet connection; App not updated; Panel offline. | Check your home internet connection. Ensure the app is updated to the latest version. Verify the control panel's network connection (RJ45 or Wi-Fi). Restart the control panel. |
| Wireless device not registering. | Device too far; Low battery; Incorrect registration procedure. | Move the device closer to the panel during registration. Replace the device's battery. Follow the specific registration steps for the device and use the external registration button on the panel. Consider adding a repeater if range is an issue. |
| Siren not activating during alarm. | Siren disabled in settings; Faulty siren. | Check siren settings in the mobile application. If the issue persists, contact technical support. |
| Falešné poplachy. | Improper sensor placement; Sensor sensitivity too high; Environmental factors. | Review sensor placement and ensure they are not triggered by pets, drafts, or direct sunlight. Adjust sensor sensitivity settings if available. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Intelbras technical support.
8. Technické specifikace
| Funkce | Specifikace |
|---|---|
| Model | AMT 8000 PRO |
| Výrobce | Intelbras |
| Typ montáže | Držák na zeď |
| Rozměry (D x Š x V) | 15 x 20 x 25 cm (5.9 x 7.9 x 9.8 palce) |
| Hmotnost | 850 gramů (1.87 lb) |
| Barva | Bílý |
| Zdroj napájení | Kabelové elektrické |
| Počet zón | 64 (Wireless) |
| Příčky | 16 Independent Partitions |
| Keypad Support | Up to 16 Keypads |
| Podpora dálkového ovládání | Up to 98 Remote Controls |
| Siren Support | Integrated Siren + Up to 16 External Sirens |
| Komunikační moduly | Compatible with XG 2G, XG 3G, XG 4G Modules |
| Připojení k síti | RJ45 (Ethernet), Integrated Wi-Fi |
| Kontrolní metoda | Mobilní aplikace |
| Bezdrátové Dosah | Až 1000 metrů (otevřená plocha) |
| Repeater Support | Up to 4 Repeaters |
9. Bezpečnostní informace
- Před zahájením jakékoli údržby nebo instalace vždy odpojte napájení.
- Do not expose the control panel to water or excessive humidity.
- Zajistěte řádné větrání kolem jednotky.
- Používejte pouze napájecí adaptér dodaný se zařízením.
- Pokud si nejste jisti některými kroky, měl by instalaci provést kvalifikovaný personál.
- Uchovávejte mimo dosah dětí.
10. Záruka a podpora
For warranty information, please refer to the warranty card included with your product or visit the official Intelbras website. For technical assistance, troubleshooting beyond this manual, or to inquire about additional accessories, please contact Intelbras customer support.
Intelbras Official Webmísto: www.intelbras.com.br
Note: Support contact details may vary by region. Please check the Intelbras webstránky pro místní kontaktní informace.
