1. Úvod
This manual provides detailed instructions for the safe and correct installation and use of the Meliconi Slimstyle Plus 400 S Fixed Wall TV Mount. This mount is designed for televisions ranging from 40 to 82 inches, supporting VESA patterns 200x200, 300x300, and 400x400. It is suitable for installation on both solid walls and plasterboard walls (with specific weight limitations). Please read all instructions carefully before beginning installation.
2. Bezpečnostní informace
- Přečtěte si všechny pokyny: Ensure you understand all installation steps and safety warnings before proceeding.
- Nosnost: Do not exceed the maximum load capacity of 50 kg (110 lbs) for solid walls or 35 kg (77 lbs) for plasterboard walls.
- Velikost televizoru: Tento držák je kompatibilní s televizory s úhlopříčkou od 40 do 82 palců.
- Kompatibilita VESA: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) matches 200x200, 300x300, or 400x400 mm.
- Typ stěny: Ensure the wall structure can safely support the combined weight of the mount and your television. If unsure, consult a qualified professional.
- Nástroje: Během instalace používejte vhodné nástroje a noste ochranné pomůcky.
- Děti: Udržujte děti mimo oblast instalace.
3. Obsah balení
Carefully unpack the box and ensure all components are present and undamaged. Refer to the image below for typical package contents.
Image 3.1: Meliconi Slimstyle Plus 400 S packaging. The package typically includes the wall plate, TV brackets, mounting hardware (screws, anchors, washers), and an instruction manual.
Typický obsah zahrnuje:
- Wall Plate (main mount component)
- TV Brackets (attach to the back of the TV)
- Montážní materiál (šrouby, hmoždinky, podložky, distanční podložky)
- Návod k použití
4. Konec produktuview a Rozměry
The Meliconi Slimstyle Plus 400 S is a fixed wall mount designed for a sleek, low-profile installation. The mount features the Fast Block locking system for secure TV attachment and EVA foam protectors to safeguard your TV.
Image 4.1: The Meliconi Slimstyle Plus 400 S fixed wall TV mount.
Refer to the technical drawing below for detailed dimensions:
Image 4.2: Technical drawing showing the dimensions of the Meliconi Slimstyle Plus 400 S mount. Maximum width is approximately 40 cm (15.7 inches) and maximum height is approximately 40 cm (15.7 inches) for the TV mounting arms. The mount depth is very slim, approximately 1.5 cm (0.6 inches) without spacers and 3 cm (1.2 inches) with included spacers.
5. Instalační příručka
5.1. Než začnete
- Zkontrolujte kompatibilitu televizoru: Confirm your TV's size (40-82 inches) and VESA pattern (200x200, 300x300, or 400x400 mm).
- Určete typ zdi: Identify if your wall is solid (concrete, brick) or plasterboard. This affects the type of anchors and drilling required.
- Locate Studs (for plasterboard): For plasterboard walls, it is crucial to mount the bracket to a vertical wooden or metal stud for maximum security.
- Odbavení: Ensure there are no electrical wires, water pipes, or other obstructions in the drilling area.
5.2. Požadované nástroje
- Tužka
- Měřicí páska
- Úroveň
- Vrtat
- Drill Bits (appropriate for wall type and anchor size)
- Šroubovák (hlava Phillips)
- Stud Finder (for plasterboard walls)
5.3. Postup instalace
- Připevnění držáků televizoru k televizoru:
- Opatrně položte televizor displejem dolů na měkký, čistý povrch.
- Zarovnejte držáky televizoru s montážními otvory VESA na zadní straně televizoru.
- Select the correct screws and washers from the provided hardware kit that fit your TV's mounting holes. Use spacers if necessary to ensure the brackets are flush and cables are not pinched.
- Securely fasten the TV brackets to the TV. Do not overtighten.
- Mark Wall Drilling Positions:
- Determine the desired height for the top of your TV.
- Hold the wall plate against the wall at the desired position. Use a level to ensure it is perfectly horizontal.
- Mark the drilling points through the holes on the wall plate with a pencil.
- Vrtací otvory:
- Using the appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill holes at the marked positions.
- For solid walls, insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if needed until flush with the wall surface.
- For plasterboard walls, ensure you are drilling into a vertical stud. Use appropriate stud-specific anchors if not directly into a stud, but direct stud mounting is highly recommended for safety. The mount is suitable for plasterboard walls with a thickness from 12.5mm to 25mm.
- Nástěnná deska:
- Zarovnejte nástěnnou desku s vyvrtanými otvory.
- Insert the mounting screws through the wall plate and into the anchors (for solid walls) or directly into the studs (for plasterboard).
- Tighten all screws firmly until the wall plate is securely fixed to the wall. Do not overtighten.
- Zavěšení televize na nástěnnou desku:
- S pomocí opatrně zvedněte televizor (s připevněnými držáky) a zavěste držáky televizoru na horní okraj nástěnné desky.
- Gently lower the TV until the brackets fully engage with the wall plate. Ensure the TV is centered and level.
- Secure TV with Fast Block System:
- Locate the Fast Block locking mechanism on the TV brackets.
- Engage the Fast Block system to securely lock the TV to the wall plate. This prevents accidental dislodgement.
- Verify that the TV is firmly attached and cannot be easily lifted off the mount.
6. Provoz
Once installed, the Meliconi Slimstyle Plus 400 S is a fixed mount, meaning it does not offer swivel or tilt adjustments beyond any initial slight tilt. The primary operation involves securely attaching and detaching your TV.
- Attaching the TV: As described in the installation steps, hook the TV brackets onto the wall plate and engage the Fast Block locking system.
- Detaching the TV: To remove the TV, disengage the Fast Block locking system. With assistance, carefully lift the TV upwards and away from the wall plate.
7. Údržba
- Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Pravidelné kontroly: Periodically check all screws and connections to ensure they remain tight and secure. Do not overtighten.
- Poškození: If any part of the mount appears damaged, do not use it. Contact customer support for assistance.
8. Řešení problémů
- Televizor není vodorovně: Ensure the wall plate was installed perfectly level. If not, you may need to adjust the wall plate's position.
- Držák se zdá být uvolněný: Re-check all mounting screws on both the wall plate and the TV brackets. Ensure they are securely tightened. Verify the Fast Block system is engaged. If the wall anchors are loose, professional assistance may be required.
- TV does not fit: Double-check your TV's VESA pattern and weight against the mount's specifications. Ensure you are using the correct screws and spacers.
9. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | 480957 |
| Kompatibilní velikosti TV | 40" až 82" |
| Kompatibilita VESA | 200x200, 300x300, 400x400 mm |
| Maximum Load Capacity (Solid Wall) | 50 kg (110 lb) |
| Maximum Load Capacity (Plasterboard Wall) | 35 kg (77 lb) |
| Typ montáže | Pevný držák na zeď |
| Typ pohybu | Opraveno |
| Maximální úhel náklonu | 12 Degrees (slight downward tilt) |
| Materiál | Kov |
| Barva | Černý |
| Rozměry produktu | 0.91 x 18.03 x 4.69 inches (approximate, mount only) |
| Hmotnost položky | 3.74 libry |
10. Záruka a podpora
The Meliconi Slimstyle Plus 400 S TV mount is 100% Made in Italy and certified by TÜV SÜD, ensuring high quality and reliability. For specific warranty details, please refer to the documentation included with your purchase or visit the official Meliconi webmísto.
For technical support, missing parts, or any questions regarding the installation or operation of your Meliconi TV mount, please contact Meliconi customer service through their official webwebu nebo kontaktních informací uvedených na obalu produktu.
