1. Úvod
This manual provides essential information for the safe and effective operation, setup, and maintenance of your YESWELDER TIG-200P ACDC 200A AC/DC Aluminum TIG Welder. This versatile machine offers multiple welding processes, including STICK, AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, and Spot Welding, making it suitable for a wide range of applications, including aluminum welding. Please read this manual thoroughly before operating the equipment.
Figure 1: YESWELDER TIG-200P ACDC Welder and accessories.
2. Bezpečnostní informace
Welding operations involve significant risks. Always adhere to safety precautions to prevent injury or damage. This section outlines general safety guidelines. Refer to local and national safety standards for comprehensive information.
- Ochrana očí a obličeje: Always wear a welding helmet with appropriate shade lenses to protect against arc rays and sparks.
- Ochrana těla: Wear flame-resistant clothing, heavy-duty gloves, and safety shoes. Avoid loose clothing.
- Větrání: Zajistěte dostatečné větrání pro odstranění svařovacích výparů a plynů z pracovního prostoru.
- Požární prevence: Keep a fire extinguisher nearby. Remove flammable materials from the welding area.
- Elektrická bezpečnost: Ensure proper grounding. Do not operate the welder in wet conditions. Inspect cables for damage before use.
- Bezpečnost plynových lahví: Zajistěte plynové lahve, aby se nepřevrhly. Používejte vhodné regulátory a hadice.
- Pracovní oblast: Udržujte pracovní prostor čistý a bez nepořádku. Zajistěte dobré osvětlení.
3. Vlastnosti a komponenty produktu
The YESWELDER TIG-200P ACDC is designed for versatility and ease of use, featuring a large LED display and multiple welding functions.
3.1 Multi-Process Capabilities
This 6-in-1 welder supports various welding modes to meet diverse project requirements:
- Svařování tyčí: Pro všeobecné svařování obalenými elektrodami.
- AC TIG (HF TIG): High-frequency TIG welding for aluminum and magnesium.
- DC TIG (HF TIG): High-frequency TIG welding for stainless steel, carbon steel, and copper.
- Pulzní TIG střídavým proudem: Enhanced control for thin aluminum materials, reducing heat input.
- Pulzní TIG stejnosměrný proud: Improved control for thin materials, reducing distortion.
- Bodové svařování: Pro rychlé a přesné bodové svary.
Figure 2: The 6-in-1 multi-process capabilities of the TIG-200P ACDC welder.
3.2 Ovládací panel a displej
The large LED display provides clear visibility of welding parameters, function modes, and current settings, allowing for precise adjustments.
Figure 3: Enhanced LED Panel for clear parameter display and adjustment, featuring Downslope & Post control for improved weld quality.
Obrázek 4: Detailní view of the control panel with numbered functions for easy navigation and parameter adjustment.
3.3 Přenositelnost
Weighing only 16.47 lbs, the TIG-200P ACDC is designed for easy transport and maneuverability in various work environments.
Figure 5: The compact and lightweight design of the TIG-200P ACDC welder.
3.4 Regulátor plynu
The included Argon/CO2 flow meter gas regulator provides precise gas flow control, essential for quality TIG and MIG welding. It features a flow tube reading from 0-60 CFH and a pressure gauge from 0-4000 PSI.
Figure 6: The gas regulator for precise gas flow and pressure measurement.
4. Nastavení
Správné nastavení je klíčové pro bezpečný a efektivní provoz.
4.1 Připojení napájení
- The TIG-200P ACDC supports dual voltage input (110V/220V). Ensure the correct power cord and plug are used for your power supply.
- Connect the welder to a dedicated circuit with appropriate overcurrent protection.
4.2 Pozemní třídaamp Spojení
- Připojte zem třamp cable to the appropriate terminal on the welder.
- Připojte zem třamp securely to the workpiece or a sturdy metal workbench that is electrically connected to the workpiece.
4.3 Připojení hořáku TIG
- Connect the TIG torch cable to the designated TIG torch connector on the front panel.
- Ujistěte se, že je spojení těsné a bezpečné.
4.4 Gas Regulator and Cylinder Connection
Connect the gas regulator to your Argon or Argon/CO2 gas cylinder. The regulator comes with various connection options for compatibility.
- Ensure the gas cylinder is secured upright.
- Attach the regulator to the cylinder valve, ensuring a tight seal.
- Connect the gas hose from the regulator to the gas inlet on the welder.
Figure 7: Three common connection types for the gas regulator.
Obrázek 8: Detailní view of the gas regulator's connection points and detachable accessories.
5. Návod k obsluze
Follow these steps for basic operation of your TIG-200P ACDC welder.
5.1 Zapnutí a výběr režimu
- Zapněte hlavní vypínač, který se nachází na zadní straně stroje.
- Použijte Tlačítko režimu svařování (1 in Figure 4) to cycle through STICK, AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, and Spot Welding modes.
- Použijte Operation Mode Buttons (2 and 3 in Figure 4) to navigate through sub-modes or parameter groups.
5.2 Nastavení parametrů
The large LED display (6 in Figure 4) will show the current selected parameter. Use the Parameter Adjusting knob (5 in Figure 4) to modify values.
- Proud (A): Seřízení svařování amphodnota v závislosti na tloušťce a typu materiálu.
- Pulse Features: For Pulse TIG modes, adjust pulse frequency (Hz), pulse width, and background current.
- AC Balance: For AC TIG, adjust the AC balance to control cleaning action and penetration.
- Downslope & Post Gas: Adjust downslope time to gradually reduce current at the end of a weld, and post-gas flow time to protect the cooling weld puddle and tungsten.
- Horký start a síla oblouku: For STICK welding, these parameters assist with arc ignition and prevent electrode sticking.
5.3 Aluminum Welding (AC TIG)
The TIG-200P ACDC utilizes a software-controlled square wave for AC TIG, which is ideal for welding aluminum up to 4/25" (approximately 4mm). Adjusting the AC balance and frequency is key to achieving optimal results with aluminum.
5.4 Gas Flow Adjustment
- Pomalu otevřete ventil plynové láhve.
- Adjust the regulator knob to set the desired gas flow rate (CFH) as indicated by the ball in the flow tube. Typical TIG welding flow rates range from 10-20 CFH.
6. Údržba
Pravidelná údržba zajistí dlouhou životnost a optimální výkon vaší svářečky.
- Čištění: Periodically clean the welder's exterior with a dry, soft cloth. Use compressed air to blow out dust from inside the machine, especially from cooling vents. Ensure the machine is unplugged before cleaning.
- Kontrola kabelů: Regularly inspect all welding cables, power cords, and gas hoses for cuts, cracks, or damage. Replace damaged components immediately.
- Spotřební materiál: Check and replace TIG torch consumables (tungsten electrodes, collets, collet bodies, nozzles) as needed. Ensure tungsten is properly ground.
- Spojení: Verify that all electrical and gas connections are tight and secure.
7. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat. V případě problémů, které zde nejsou uvedeny, kontaktujte zákaznickou podporu.
7.1 Bez napájení
- Zkontrolujte napájecí kabel: Ensure the power cord is securely plugged into both the welder and the power outlet.
- Jistič: Ověřte, zda se nevypnul jistič.
- Hlavní vypínač: Confirm the welder's main power switch is in the 'ON' position.
7.2 No Arc
- Pozemní Clamp: Zajistěte uzemnění třamp je bezpečně připevněn k obrobku a má dobrý elektrický kontakt.
- Připojení hořáku TIG: Check that the TIG torch is properly connected to the welder.
- Režim svařování: Verify that the correct welding mode is selected for the application.
- Spotřební materiál: Inspect the tungsten electrode for proper installation and condition.
7.3 Poor Weld Quality
- Průtok plynu: Check the gas flow rate on the regulator. Insufficient or excessive gas flow can lead to porosity.
- Material Cleanliness: Ensure the workpiece is clean and free of contaminants (oil, rust, paint).
- Parametry: Adjust welding current, pulse settings, and AC balance (for aluminum) according to the material and thickness.
- Tungsten Condition: A contaminated or improperly ground tungsten electrode can cause poor arc stability and weld quality.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Model | TIG-200P ACDC |
| Vstupní objemtage | 110V/220V Dual Voltage |
| Režimy svařování | STICK, AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, Spot Welding |
| Max Aluminum Thickness (AC TIG) | Up to 4/25" (approx. 4mm) |
| Gas Flow Gauge Range | 0 - 60 CFH |
| Gas Pressure Gauge Range | 0 - 4000 PSI |
| Hmotnost | 16.47 liber |
| Rozměry (D x Š x V) | Přibližně 8.66 cm x 5.91 cm x 15.35 cm |
9. Záruka a podpora
For warranty information, technical support, or service inquiries, please contact YESWELDER customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Visit the official YESWELDER webNejnovější kontaktní informace a záruční podmínky naleznete na webových stránkách nebo na obalu produktu.
