Konec produktuview
The Diode Dynamics SL2 White Fog Light LEDs are designed as a direct replacement for Dodge SX 2.0 fog light bulbs (2003-2005 models). These LEDs provide a modern aesthetic and enhanced illumination with correct optical focus for street-legal output. They are engineered for simple plug-and-play installation, requiring no modifications to the vehicle's existing wiring or housing.
Each pair of SL2 LEDs is rigorously tested to ensure consistent color matching and reliable performance, offering a significant upgrade over factory halogen bulbs. The robust design, featuring custom wiring and exclusive zinc castings, contributes to their long-term durability.
Image: Diode Dynamics SL2 White Fog Light LED bulbs. These bulbs feature a durable metal construction with integrated LED chips designed for optimal light output.
Klíčové vlastnosti
- Přímá náhrada: Specifically designed for Dodge SX 2.0 Fog Light bulbs (2003-2005).
- Street Legal Output: Engineered with correct optical focus to ensure compliance with street legal requirements.
- Instalace Plug and Play: Simple installation process with no modifications needed.
- Vysoký jas: Provides a significant increase in light output compared to factory halogen bulbs.
- Konzistentní barva: Each batch is tested to ensure uniform 6000K Cool White color.
- Spolehlivá konstrukce: Features custom wiring, strain reliefs, solderless terminals, and exclusive zinc castings for durability.
- USA Engineered and Assembled: Designed and assembled in the United States.
Nastavení a instalace
Before beginning installation, ensure the vehicle's ignition is off and the fog light circuit is de-energized. It is recommended to wear appropriate safety gear, such as gloves and eye protection.
- Access Fog Light Bulbs: Locate the fog light assemblies on your Dodge SX 2.0. Depending on the vehicle's design, access may be from under the bumper, through the wheel well liner, or from the engine bay. Consult your vehicle's service manual for specific access procedures.
- Odstraňte stávající žárovky: Carefully twist and pull the existing halogen fog light bulb from its housing. Disconnect the electrical connector by pressing the release tab and pulling it apart.
- Connect New LED Bulbs: Connect the electrical connector from the vehicle's wiring harness to the connector on the Diode Dynamics SL2 LED bulb. Ensure a secure connection.
- Vložte LED žárovky: Insert the Diode Dynamics SL2 LED bulb into the fog light housing. Twist the bulb clockwise until it locks securely into place. Ensure the LED chips are oriented correctly for optimal light pattern (typically facing left and right, or up and down, depending on the housing design).
- Test funkčnosti: Before reassembling any removed panels, turn on the vehicle's fog lights to verify proper operation of the new LED bulbs. Check for correct illumination and ensure both bulbs are functioning.
- Znovu sestavit: Once confirmed, reassemble any panels or liners that were removed to access the fog lights.
Poznámka: The SL2 LEDs are designed for a direct fit. Avoid forcing the bulb into the housing. If resistance is met, re-check the alignment.
Návod k obsluze
The Diode Dynamics SL2 White Fog Light LEDs operate in conjunction with your vehicle's existing fog light switch. Once installed, simply activate your vehicle's fog lights as you normally would. The LEDs will illuminate instantly, providing enhanced visibility and a modern appearance.
- Ensure your vehicle's electrical system is functioning correctly.
- Activate fog lights using the vehicle's factory control.
- The LEDs are designed for continuous operation during vehicle use.
Údržba
Diode Dynamics SL2 LED fog light bulbs are designed for long-term, maintenance-free operation. Due to their solid-state design, they do not have filaments that can burn out like traditional halogen bulbs.
- Čištění: If the outer lens of your fog light housing becomes dirty, clean it with a soft cloth and mild automotive glass cleaner. Avoid abrasive cleaners that could scratch the lens.
- Inspekce: Periodically inspect the wiring connections to ensure they remain secure and free from corrosion.
- Poškození: In case of physical damage to the LED bulb or its housing, replacement may be necessary. Do not attempt to repair the LED bulb internally.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| LED diody nesvítí. |
|
|
| One LED illuminates, the other does not. |
|
|
| LED diody blikají nebo ztlumují. |
|
|
Specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | DD0481P |
| Kompatibilita | Dodge SX 2.0 (2003-2005) Fog Light Bulbs |
| Teplota barev | Studená bílá (6000K) |
| Ampvymazat | 1.6 Amps |
| Hmotnost položky (pár) | 8.8 unce (cca 249 gramů) |
| Rozměry produktu (kus) | Approx. 9.25 x 5.75 x 2.25 inches (packaging dimensions) |
| Země původu | China (Assembly in USA) |
Poznámka: Specifikace se mohou změnit bez předchozího upozornění z důvodu vylepšení produktu.
Záruka a podpora
Diode Dynamics SL2 White Fog Light LEDs are backed by a 3-year replacement manufacturer warranty. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.
For warranty claims, technical assistance, or any questions regarding your Diode Dynamics product, please contact Diode Dynamics customer support directly. Please have your proof of purchase and product model number (DD0481P) ready when contacting support.
Diode Dynamics Contact Information:
(Specific contact details like phone number or webmísto URL are typically provided by the manufacturer. Please refer to the official Diode Dynamics website or product packaging for the most current contact information.)
