Tru-Bolt 440-3350

Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset Instruction Manual

Model: 440-3350

For installation, operation, and maintenance

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset, Model 440-3350. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product. Keep this manual for future reference.

Konec produktuview

The Tru-Bolt Amherst Entry Door Handleset features a transitional farmhouse design with an oil rubbed bronze finish. It is designed for standard size doors and includes an adjustable throughbolt and backset for flexible installation.

Klíčové vlastnosti:

  • Transitional farmhouse design with an oil rubbed bronze finish.
  • Adjustable throughbolt for flexible positioning.
  • Compatible with all standard size doors.
  • Robustní kovová konstrukce pro dlouhou životnost.
  • Adjustable backset fits doors 1-3/8" to 1-3/4" thick.

Obsah balení

Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny:

  • Exterior Handleset Assembly
  • Interior Knob/Lever Assembly
  • Instalační materiál (šrouby, vřeteno atd.)
  • Note: Strike plate is not included and must be purchased separately if needed.

Bezpečnostní informace

  • Během instalace vždy používejte vhodné ochranné pomůcky, jako jsou rukavice a ochrana očí.
  • Ensure all screws are tightened securely to prevent loosening over time.
  • Udržujte malé části mimo dosah dětí.
  • Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným odborníkem.

Nastavení a instalace

Before you begin, ensure your door is prepared with the necessary bore holes and backset. This handleset is designed for doors 1-3/8" to 1-3/4" thick.

Požadované nástroje (nejsou součástí dodávky):

  • Šroubovák s křížovou hlavou
  • Měřicí páska
  • Tužka

Kroky instalace:

  1. Připravte dveře: Ensure the door has standard bore holes and the correct backset. The adjustable backset feature allows for flexibility.
  2. Nainstalujte západkový šroub: Insert the latch bolt into the edge bore hole of the door. Secure it with screws. Ensure the bevel of the latch faces the door frame.
  3. Instalace vnější kliky: Position the exterior handleset (the part with the long handle) onto the door, aligning the spindle through the latch bolt. The adjustable throughbolt allows for precise alignment.
  4. Exterior Tru-Bolt Amherst Handleset in Oil Rubbed Bronze

    Obrázek 1: Exteriér view of the Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset. This shows the main handle and the upper lock mechanism.

  5. Install Interior Knob/Lever: Place the interior knob or lever assembly onto the door, aligning it with the exterior handleset and the spindle.
  6. Interior Tru-Bolt Amherst Knob in Oil Rubbed Bronze

    Obrázek 2: Interiér view of the Tru-Bolt Amherst Oil Rubbed Bronze knob. This is the component that goes on the inside of the door.

  7. Bezpečné sestavy: Use the provided installation hardware (screws) to securely fasten the interior and exterior assemblies together. Ensure the handleset operates smoothly before fully tightening all screws.
  8. Testovací provoz: Close the door and test the latching and locking mechanisms to ensure proper function.

Návod k obsluze

  • To Open from Exterior: Insert the correct key into the cylinder and turn to unlock. Depress the thumb-latch to retract the latch bolt.
  • To Open from Interior: Turn the interior knob/lever to retract the latch bolt.
  • Zamknutí zvenku: Use the key to engage the deadbolt (if paired with one) or the handleset's locking mechanism.
  • Zamknutí z interiéru: Use the turn-button or lever on the interior knob/lever to engage the lock.

Údržba

  • Čištění: Očistěte rukojeť měkkým hadříkemamp cloth. Avoid abrasive cleaners, solvents, or polishing agents, as these can damage the oil rubbed bronze finish.
  • Mazání: Periodically apply a small amount of graphite lubricant to the keyway if the lock mechanism feels stiff. Do not use oil-based lubricants.
  • Inspekce: Regularly check all screws for tightness and ensure the handleset operates smoothly. Tighten any loose screws as needed.

Odstraňování problémů

ProblémMožná příčinaŘešení
Handleset is stiff or hard to turn.Lack of lubrication; misaligned components.Apply graphite lubricant to the keyway. Check for proper alignment during installation.
Západka se úplně nezasune.Screws too tight; latch bolt misaligned.Loosen mounting screws slightly and re-test. Ensure latch bolt is installed correctly.
Rukojeť se zdá být volná.Upevňovací šrouby jsou uvolněné.Utáhněte všechny viditelné montážní šrouby.

Specifikace

FunkceDetail
ZnačkaTru-Bolt
Číslo modelu440-3350
BarvaBronz
StylPřechodné
DokončitRopný olej
MateriálKov
Typ rukojetiLever (Interior Knob/Lever)
Počet kusů2 (Handleset and Interior Knob/Lever)
Speciální funkceAdjustable throughbolt, Adjustable backset
Kompatibilita tloušťky dveří1-3/8" to 1-3/4"
Rozměry produktu30.35 x 7.01 x 7.01 cm (přibližně 11.95 x 2.76 x 2.76 palce)
Zahrnuté komponentyInstalační hardware

Záruka a podpora

For information regarding warranty coverage or technical support, please refer to the official Tru-Bolt webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Poznámka: Konkrétní záruční podmínky se mohou lišit v závislosti na regionu a prodejci.