Dobíjecí hlavice WdtProamp (2 kusy) a uživatelská příručka k LED svítilně S3000

1. Úvod

Thank you for choosing the WdtPro Rechargeable Headlamp 2-Pack and S3000 LED Flashlight. This manual provides essential information for the safe and effective use of your lighting devices. Please read it thoroughly before operation and retain it for future reference.

Image 1.1: The WdtPro package includes two rechargeable headlamps and one S3000 LED flashlight, along with charging accessories.

2. Obsah balení

Prosím, ověřte, zda jsou v balení přítomny všechny položky:

• 2 x WdtPro Rechargeable Headlamps
• 1 x WdtPro S3000 LED Flashlight
• 2 x USB nabíjecí kabely
• Batteries (pre-installed or included for both devices)

Image 2.1: The WdtPro S3000 LED Flashlight is packaged securely, indicating its features and brand.

3. Nastavení

3.1 Hlavaamp Nastavení

1. Upravit čelenku: Umístěte hlavuamp on your head. Adjust the elastic strap to ensure a snug yet comfortable fit. The strap should not be too tight to avoid discomfort.
2. Nastavení úhlu: Vedoucíamp unit can be tilted up to 90 degrees. Adjust the angle to direct the light beam precisely where needed.

3.2 Flashlight Setup

1. Instalace baterie: Ensure the battery is correctly installed with the positive (+) terminal facing the head of the flashlight. The S3000 flashlight typically comes with the battery pre-installed or included.
2. Počáteční poplatek: It is recommended to fully charge both the headlamp and flashlight before first use.

4. Pokyny pro nabíjení

Both the headlamp and flashlight are designed for convenient recharging.

4.1 Hlavaamp Nabíjení

1. Locate the Micro USB charging port on the side of the headlamp's battery compartment.
2. Připojte dodaný nabíjecí kabel USB k hlaviciamp and a standard USB power source (e.g., wall adapter, computer, power bank).
3. During charging, blue indicator lights on the battery compartment will flash, indicating the charging progress.
4. Charging typically takes 4-5 hours for a full charge. Once fully charged, all four blue indicator lights will remain steady.
5. A full charge provides approximately 3-11 hours of working time, depending on the selected light mode.

Obrázek 4.1: Hlavičkaamp features a Micro USB port for charging. Blue indicator lights show charging status and battery level.

4.2 Flashlight Charging

The S3000 flashlight is also rechargeable. Refer to the specific charging port and indicator details on the flashlight itself, typically a USB-C or Micro USB port. Connect it to a USB power source using the provided cable until the charging indicator signals a full charge.

5. Návod k obsluze

5.1 Hlavaamp Operace

1. Zapnutí/vypnutí: Stiskněte tlačítko napájení umístěné v horní části hlavyamp to turn it on. Press again to cycle through modes, and a long press typically turns it off.
2. Světelné režimy: Vedoucíamp features 4 primary brightness modes and 2 red light modes. Repeatedly press the power button to cycle through:
   • Nízký jas
   • Střední jas
   • Vysoký jas
   • Strobe (Flashing)
   • Červené světlo (stále svítí)
   • Red Light (Flashing/Warning)
3. Indikátor stavu baterie: Four blue LED lights on the battery compartment indicate the remaining battery level (25%, 50%, 75%, 100%).
4. Nastavení úhlu: Vedoucíamp's light unit can be manually tilted downwards by up to 90 degrees to adjust the beam direction.

Obrázek 5.1: Hlavičkaamp offers multiple lighting modes, including various brightness levels and red warning lights, along with a clear battery indicator.

Obrázek 5.2: Hlavičkaamp's light module can be adjusted up to 90 degrees to direct the beam as required.

5.2 Flashlight (S3000) Operation

1. Zapnutí/vypnutí: Press the tail-cap switch or side button (depending on model variant) to turn the flashlight on.
2. Světelné režimy: The S3000 flashlight typically features 3 modes (e.g., High, Low, Strobe). Press the power button repeatedly to cycle through these modes.
3. Funkce zoom: Some S3000 models feature a zoomable design. Extend or retract the head of the flashlight to adjust the beam from a wide floodlight to a focused spotlight.

Obrázek 5.3: Hlavičkaamp provides powerful illumination, suitable for outdoor activities and dark environments.

6. Údržba

Proper maintenance ensures the longevity and optimal performance of your WdtPro lighting devices.

• Čištění: Otřete vnější část hlavyamp and flashlight with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Péče o baterie: Recharge the devices regularly, even if not in frequent use, to maintain battery health. Avoid completely draining the battery before recharging.
• Skladování: Uložte hlavuamp and flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure batteries are partially charged (around 50%).
• Voděodolnost: The devices are water-resistant, not waterproof. Avoid submerging them in water. Ensure charging ports are dry before connecting cables.

7. Řešení problémů

If you encounter issues with your WdtPro headlamp or flashlight, refer to the following common solutions:

If the problem persists after attempting these solutions, please contact WdtPro customer support.

8. Specifikace

Key technical specifications for the WdtPro Headlamp and S3000 Flashlight:

• Značka: WdtPro
• Model: S3000 (Flashlight)
• Typ zdroje světla: LED
• Jas: Up to 6000 Lumens (White Brightness)
• Zdroj napájení: Napájení z baterie (dobíjecí lithium-iontová)
• svtage: 3.7 voltů
• Speciální vlastnosti: Lehký, dobíjecí
• Úroveň odolnosti proti vodě: Vodě odolný
• Barva: Černý
• Doporučená použití: Camping, Hiking, Fishing, Automotive Repairs, Household Tasks

9. Záruka a podpora

WdtPro products are designed for durability and performance. For warranty information, please refer to the product packaging or the official WdtPro website. If you require technical assistance or have questions regarding your product, please contact WdtPro customer support through the retailer where the product was purchased or visit the official WdtPro store online: WdtPro Store on Amazon.