1. Úvod
Thank you for choosing the Meloght 75W Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before use and retain them for future reference.
Konec produktuview
The Meloght 75W Motion Sensor Outdoor Flood Light is designed to provide bright, reliable illumination for outdoor areas such as garages, yards, and patios. Featuring a plug-in design for easy installation, it incorporates advanced motion sensing and dusk-to-dawn capabilities to enhance security and energy efficiency.
Klíčové vlastnosti
- Enhanced Detection: Sensitive motion sensor with a detection range of 20-70 feet.
- Více provozních režimů: Includes Dim Mode, Motion Sensor Mode, and Dusk to Dawn (D2D) Mode.
- Instant Plug and Play: Portable plug-in design (100-120V standard output) for simple installation without complex wiring.
- Vysoký jas: 75W, 7500LM output, illuminating up to 1150 sq. ft.
- Weatherproof Reliability: IP65 waterproof rating for outdoor use in various weather conditions. (Note: The plug is not waterproof and requires protection).
- Nastavitelný design: Multi-directional light heads and sensor for optimal coverage.
2. Bezpečnostní informace
Dodržujte prosím následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu:
- Always disconnect power before installing, servicing, or cleaning the fixture.
- Ujistěte se, že zdroj napájení objtage matches the product's requirements (100-120V).
- Do not look directly into the LED light source when illuminated, as it may cause eye strain or damage.
- The product is rated IP65 waterproof for the fixture itself. However, the plug is not waterproof. Ensure the plug connection is protected from direct water exposure when installed outdoors.
- Mount the fixture securely to a stable surface according to the installation instructions.
- Do not attempt to modify or disassemble the product. Contact qualified personnel for repairs.
- Uchovávejte obalové materiály mimo dosah dětí.
3. Obsah balení
Před instalací ověřte, zda jsou všechny komponenty přítomny:
- Meloght 75W Motion Sensor Outdoor Flood Light (Model MESLB75DW) x 1
- Mounting Hardware (screws, anchors) x 1 set
- Návod k použití x 1

Image 3.1: Meloght 75W Motion Sensor Outdoor Flood Light. This image displays the complete flood light unit with its three adjustable LED panels, central motion sensor, and integrated power cord with a standard plug.
4. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Meloght |
| Název modelu | MESLB75DW |
| Wattage | 75 wattů |
| Světelný tok | 7500 XNUMX lumenů |
| Illumination Area | Až 1150 čtverečních stop. |
| Zdroj napájení | Elektrický kabel (100–120 V) |
| Materiál | Hliník |
| Barva | Černý |
| Rozměry produktu | 10.7 cm D x 5.8 cm Š x 4.7 cm V |
| Hmotnost položky | 2.31 libry |
| Úroveň odolnosti proti vodě | IP65 (fixture only, plug not waterproof) |
| Dosah detekce pohybového senzoru | 20-70 stop |
| Úhel detekce pohybového senzoru | 180 stupňů |
| Světlá barva | Denní bílá |
| Typ instalace | Wall Mount, Soffit Mount |

Image 4.1: Product Dimensions and Adjustable Components. This image illustrates the overall dimensions of the flood light and highlights the 350-degree adjustable light heads, 110-degree adjustable motion sensor, and 90-degree adjustable light panels.
5. Nastavení a instalace
The Meloght flood light features a plug-in design for straightforward installation. Follow these steps for proper setup:
Mounting Location Selection
- Choose a suitable outdoor location for mounting, such as a wall or soffit, ensuring it provides the desired illumination coverage.
- Ensure the location is within reach of a standard 100-120V outdoor power outlet that can be protected from weather.
- For optimal motion detection, mount the light where the sensor has an unobstructed view of the area to be monitored. Avoid aiming the sensor at heat sources or reflective surfaces that could cause false triggers.
Kroky instalace
- Připravte montážní povrch: Mark the desired mounting points for the bracket on the wall or soffit.
- Namontujte montážní držák: Use the provided screws and anchors to securely attach the mounting bracket to the surface.
- Připevněte svítidlo: Align the flood light with the installed bracket and secure it firmly.
- Nastavení světelných hlavic a senzoru: Loosen the adjustment screws on the light heads and motion sensor to position them for optimal coverage and detection. Tighten the screws once adjusted.
- Připojení k napájení: Plug the power cord into a protected 100-120V outdoor electrical outlet. Ensure the outlet is weatherproof or the plug connection is otherwise shielded from moisture.

Image 5.1: Easy Plug-in Installation. This image demonstrates the simplicity of installing the flood light by mounting it to a wall or post and plugging it into an outdoor electrical outlet.
6. Návod k obsluze
The Meloght flood light offers multiple operating modes and adjustable settings. The control dials are located on the underside of the motion sensor unit.
Kontrolní číselníky
- TIME Dial: Adjusts how long the light stays on after motion is detected (typically 10 seconds to 10 minutes).
- LUX/D2D Dial: Sets the ambient light level at which the sensor becomes active. Turn towards the sun icon for daytime operation (Test Mode) or towards the moon icon for night-only operation (Dusk to Dawn).
- Volič citlivosti (SENS): Adjusts the motion sensor's detection range and sensitivity.
Provozní režimy
The flood light supports the following modes:
- Režim snímače pohybu: The light activates at 100% brightness when motion is detected in low light conditions and turns off after a set duration (adjustable via TIME dial) once motion ceases.
- Režim ztlumení: In low light conditions, the light stays on continuously at a low brightness level (10-30%). When motion is detected, it brightens to 100% for a set duration, then returns to the dim state after motion ceases.
- Režim Od soumraku do úsvitu (D2D): The flood light automatically turns on at dusk and off at dawn, providing continuous illumination throughout the night. Motion sensing is typically overridden or integrated differently depending on the specific D2D setting.
- Testovací mód: Used during installation to verify motion sensor functionality. Set the LUX dial to the 'sun' icon and TIME to minimum. The light will activate with motion regardless of ambient light.

Image 6.1: Motion Sensor Mode. This image illustrates the flood light activating to 100% brightness when people are detected, with control dials for TIME, LUX, and SENS.

Image 6.2: Dim Mode. This image shows the flood light operating at a low brightness (10-30%) and increasing to 100% upon motion detection, with control dials for TIME, LUX, and SENS.

Image 6.3: Dusk to Dawn Mode. This image depicts the flood light automatically turning on at dusk and off at dawn, with control dials for TIME, LUX, and SENS.

Image 6.4: Test Mode. This image shows a person walking past the flood light, which is illuminated, indicating the motion sensor is being tested. The control dials for TIME, LUX, and SENS are visible.
7. Údržba
Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho světlometu.
- Čištění: Pravidelně čistěte svítidlo a čočku pohybového senzoru měkkým hadříkem.amp cloth. Do not use abrasive cleaners or solvents. Ensure the power is disconnected before cleaning.
- Inspekce: Regularly inspect the power cord and plug for any signs of damage. Check mounting screws for tightness.
- Ochrana proti počasí: While the fixture is IP65 rated, ensure the plug connection remains protected from direct rain or snow. Consider using a weatherproof outlet cover.
8. Řešení problémů
If you encounter issues with your Meloght flood light, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se v noci nerozsvítí. | No power; LUX setting too high; Sensor obstructed. | Check power connection. Adjust LUX dial towards 'moon' icon. Clear any obstructions from the sensor. |
| Světlo svítí nepřetržitě. | Continuous motion detected; LUX setting too low (towards 'sun'); Wiring issue. | Ensure no constant motion in detection area. Adjust LUX dial towards 'moon' icon. If hardwired, check wiring. |
| Světlo bliká nebo se rychle cykluje zapíná/vypíná. | Interference; Power fluctuations; Sensor malfunction. | Check for nearby heat sources or reflective surfaces. Ensure stable power supply. If problem persists, contact support. |
| Dosah pohybového senzoru je příliš krátký/dlouhý. | SENS dial setting; Sensor angle. | Adjust the SENS dial. Reposition the motion sensor head for optimal coverage. |
| Světlo se rozsvítí během dne. | LUX setting too low (towards 'sun'). | Adjust the LUX dial towards the 'moon' icon to ensure it only activates in low light. |
Pokud kroky pro řešení potíží problém nevyřeší, kontaktujte prosím zákaznickou podporu.
9. Záruka a podpora
Informace o záruce
The Meloght 75W Motion Sensor Outdoor Flood Light (Model MESLB75DW) comes with a 2-letá záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or acts of nature.
Zákaznická podpora
For technical assistance, warranty claims, or any questions regarding your product, please contact Meloght customer support through the retailer's platform or the official Meloght website. Please have your model number (MESLB75DW) and proof of purchase ready when contacting support.

