Uživatelská příručka k kombinovanému hoverboardu Hover-1 My First

1. Bezpečnostní informace

Your safety is paramount when operating the Hover-1 My First Hoverboard Combo. Please read and understand all instructions before use. Failure to follow these instructions can result in serious injury or property damage.

• Always Wear Safety Gear: Helmets, knee pads, and elbow pads are highly recommended and should be worn at all times during operation.
• Věková a váhová omezení: This product is designed for children. Ensure the user meets the appropriate age and weight guidelines for safe operation.
• Dozor: Mladí jezdci by měli být vždy pod dohledem dospělé osoby.
• Bezpečné jízdní prostředí: Operate the hoverboard combo in safe, open areas away from traffic, pedestrians, and obstacles. Avoid riding on wet, uneven, or slippery surfaces.
• Bezpečnost baterie: The device features a 24V/2.0 Ah Lithium-ion rechargeable battery with a safety shield enclosure to prevent fire and overheating. Use only the provided charger. Do not attempt to modify or tamps baterií.
• Certifikace UL2272: The Hover-1 My First Hoverboard Combo is UL2272 certified, ensuring it meets applicable safety standards for electrical and fire safety.
• Vyhněte se kaskadérským kouskům: Do not attempt jumps, tricks, or aggressive maneuvers that could lead to loss of control or injury.

2. Konec produktuview

The Hover-1 My First Hoverboard Combo transforms a standard hoverboard into an exciting buggy experience. This product is designed to provide a fun and intuitive riding experience for children, combining the self-balancing technology of a hoverboard with the stability and control of a kart.

Klíčové vlastnosti:

• Dva motory o výkonu 150 W: Provides a total of 300W power for smooth acceleration and handling.
• 6.3-inch Tires: Designed for a smooth and stable ride.
• Max rychlost: Až 8 km/h (5 mph).
• Maximální rozsah: Approximately 3 miles (4.8 km) on a full charge.
• LED světlomety: Enhances visibility and adds to the riding experience.
• Hover Buggy Attachment: Converts the hoverboard into a seated kart with hand-operated rear-wheel control and an adjustable frame.

Figure 2.1: The Hover-1 My First Hoverboard Combo, showcasing the hoverboard with the attached buggy frame and seat.

3. Nastavení a montáž

3.1 Součásti balení:

Před montáží se ujistěte, že jsou přítomny všechny komponenty:

• Hover-1 My First Hoverboard Combo (Hoverboard and Buggy Attachment)
• Manuál
• Nástěnná nabíječka

3.2 Počáteční nabití:

Before first use, fully charge the hoverboard. The 24V/2.0 Ah Lithium-ion battery typically requires 5 hours for a full charge. Use only the provided wall charger.

1. Najděte nabíjecí port na hoverboardu.
2. Připojte nabíječku k nabíjecímu portu hoverboardu.
3. Zapojte nabíječku do standardní zásuvky.
4. Po dokončení nabíjení se kontrolka na nabíječce změní (např. z červené na zelenou).
5. Po úplném nabití odpojte nabíječku. Nepřebíjejte.

3.3 Attaching the Buggy:

The buggy attachment features a quick-attach connection and an adjustable frame.

1. Ujistěte se, že je hoverboard vypnutý.
2. Position the buggy attachment over the hoverboard.
3. Align the quick-attach connectors on the buggy with the footpads of the hoverboard.
4. Securely fasten the attachment mechanisms. Refer to the diagrams in the printed manual for precise connection points.
5. Adjust the frame length to comfortably fit the rider's leg length. Ensure all locking mechanisms are engaged before riding.

4. Návod k obsluze

4.1 Riding the Hoverboard (without Buggy):

The Hover-1 features a self-balancing system for intuitive control.

1. Zapněte hoverboard.
2. Step onto one side of the hoverboard first. The board will stabilize.
3. Place your other foot onto the hoverboard. Maintain a relaxed posture and keep your balance.
4. Pro pohyb vpřed se mírně nakloňte dopředu a pro zpomalení nebo couvání se nakloňte dozadu.
5. To turn, apply gentle pressure with your feet in the desired direction.
6. To dismount, step off one foot at a time, ensuring the hoverboard remains stable.

4.2 Operating the Hover Buggy Attachment:

The buggy attachment provides a seated riding experience with hand controls.

1. Ensure the buggy is securely attached to the hoverboard and the hoverboard is powered on.
2. Sit comfortably in the seat with your feet on the footrests.
3. Grasp the hand-operated rear-wheel control levers.
4. Push both levers forward to move forward.
5. Pull both levers back to slow down or reverse.
6. To turn, push one lever forward while pulling the other back, or apply differential pressure.
7. Vždy mějte situaci pod kontrolou a buďte si vědomi svého okolí.

Figure 4.1: A child demonstrating the operation of the Hover-1 My First Hoverboard Combo with the buggy attachment.

5. Údržba

Regular maintenance ensures the longevity and safe operation of your Hover-1 My First Hoverboard Combo.

5.1 Čištění:

• Wipe down the hoverboard and buggy with a damp hadříkem po každém použití.
• Nepoužívejte drsné chemikálie ani abrazivní čisticí prostředky.
• Avoid getting water into electronic components or charging ports.

5.2 Úložiště:

• Přístroj skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• If storing for an extended period, ensure the battery is charged to approximately 50% and recharge it every 3 months to prevent battery degradation.

5.3 Péče o baterii:

• Používejte pouze originální nabíječku dodanou s produktem.
• Do not operate the hoverboard if the battery is visibly damaged or leaking.
• Zlikvidujte baterie v souladu s místními předpisy.

6. Řešení problémů

If you encounter issues with your Hover-1 My First Hoverboard Combo, refer to the following common problems and solutions:

If you experience a problem not listed here, or if the suggested solutions do not resolve the issue, please contact Hover-1 Customer Support for assistance.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce:

The Hover-1 My First Hoverboard Combo comes with a 90denní záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé běžným používáním. Nevztahuje se na škody způsobené nesprávným použitím, nehodami, neoprávněnými úpravami nebo nedodržením pokynů v této příručce.

8.2 Zákaznická podpora:

For warranty claims, technical assistance, or any questions regarding your Hover-1 My First Hoverboard Combo, please contact Hover-1 Customer Support. Refer to the contact information provided on the Hover-1 official website or the packaging for the most current support details.

When contacting support, please have your model number (H1-MFH-CMB-3) and proof of purchase readily available.