Herní počítačová skříň HYTE Y70 Mid-Tower ATX. Návod k obsluze.

1. Úvod a konecview

The HYTE Y70 is an advanced dual-chamber ATX mid-tower computer case designed for modern gaming setups. It features a panoramic tempered glass display, accommodating large 4-slot vertical graphics cards, and offers extensive cooling capabilities. This manual provides essential information for assembling, operating, and maintaining your HYTE Y70 case.

Obrázek 1.1: Přední a boční view of the HYTE Y70 case, showcasing its panoramic tempered glass panels.

2. Klíčové vlastnosti

• Unified Modern Aesthetic: Features a beautifully crafted 3-piece panoramic glass and a dual-chamber interior, available in four unique colorways.
• Massive 4-Slot Vertical Graphics Support: Accommodates large GPUs with an included luxury PCIe 4.0 x16 riser cable, featuring a color-matched canopy for seamless visual integration.
• Ginormous Cooling Capacity: Supports up to a 360mm radiator on the side (125mm thick) and an adjustable top bracket for another 360mm radiator (up to 68mm thick). Includes cold floor cooling for up to three 120mm or two 140mm fans (up to 32mm thick).
• Exquisite Detailing: Thoughtful design elements such as helpful labels, reusable Velcro straps for cable management, floating storage sleds, and a tactile blue power switch.
• Premium Build Experience: Constructed with high-quality materials and tight tolerances, featuring tool-less panels and extensive cable management space in the rear chamber.

3. Průvodce nastavením

Follow these steps for proper assembly and installation of components within your HYTE Y70 case.

3.1. Příprava případu

Before installing components, ensure the case is placed on a stable, flat surface. Remove the tempered glass panels and the rear side panel by gently pulling them away from the chassis. These panels are tool-less for easy access.

Obrázek 3.1: Interiér view of the HYTE Y70, showing the dual-chamber design and component mounting areas.

3.2. Instalace základní desky

The HYTE Y70 supports ATX, mATX, and ITX motherboards. Align your motherboard with the standoffs inside the main chamber and secure it with the provided screws. Ensure all necessary cables (front panel connectors, USB, audio) are routed through the L-shaped molded rubber grommet for clean management.

3.3. Instalace grafické karty

The case includes a PCIe 4.0 x16 riser cable for vertical GPU mounting. Install your graphics card into the riser cable's slot and secure it. The design allows for massive 4-slot GPUs. Ensure the riser cable is properly connected to your motherboard's PCIe slot.

3.4. Nastavení chladicího systému

The Y70 offers extensive cooling options:

• Boční chladič: Mount up to a 360mm radiator (max 125mm thick) on the side bracket.
• Horní radiátor: An adjustable top bracket supports another 360mm radiator (max 68mm thick).
• Cold Floor Cooling: Install up to three 120mm or two 140mm fans (max 32mm thick) at the bottom for direct GPU airflow.
• Zadní ventilátor: An additional fan can be mounted at the rear for exhaust.

Obrázek 3.2: Horní a zadní část view of the HYTE Y70, illustrating the ventilation and fan mounting points.

3.5. Instalace úložiště

The case features floating storage sleds that eject from the rear for intuitive drive maintenance. Install your 2.5-inch SSDs or 3.5-inch HDDs into these sleds and reinsert them into the rear chamber.

3.6. Správa kabelů

Utilize the extensive cable routing channels, tie-down points, and reusable Velcro straps in the rear chamber to organize your cables. This dual-chamber design ensures a clean and unobstructed view of your components in the main chamber.

Obrázek 3.3: Zadní view of the HYTE Y70, detailing the cable management space and storage sleds.

4. Návod k obsluze

Once all components are securely installed and connected, replace the side panels. Connect your power supply to a wall outlet and press the power button located on the front I/O panel. The system should initiate startup. Utilize the front panel USB and audio ports for peripheral connectivity.

Obrázek 4.1: Example of a fully assembled PC within the HYTE Y70 case.

5. Údržba

Regular maintenance ensures optimal performance and longevity of your HYTE Y70 case and its components.

• Prachové filtry: Periodically clean the removable dust filters located on the top, bottom, and side panels. Gently remove them and clean with compressed air or a soft brush.
• Čištění exteriéru: Wipe the tempered glass panels and exterior surfaces with a soft, lint-free cloth. For stubborn smudges on glass, use a glass cleaner sparingly on the cloth, not directly on the panel.
• Utírání prachu z interiéru: Every few months, open the case and use compressed air to remove dust buildup from fans, radiators, and other components.

6. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

• Bez napájení: Ensure the power supply is properly connected to the wall outlet and the motherboard. Check all internal power cables (24-pin ATX, CPU, GPU). Verify the power button cable is correctly connected to the motherboard's front panel header.
• Ventilátory se netočí: Check fan connections to the motherboard or fan controller. Ensure fan headers are enabled in BIOS/UEFI settings.
• Components Not Detected: Re-seat the component (e.g., RAM, GPU) in its slot. Verify all necessary power cables are connected. Check motherboard manual for proper slot usage.
• Přehřívání: Ensure all fans are spinning in the correct direction (intake/exhaust). Verify radiators are clean and unobstructed. Consider adding more fans or upgrading cooling solutions if temperatures remain high.
• Panel Removal Difficulty: Ensure no screws are still in place if applicable. Gently but firmly pull the tool-less panels. Refer to the initial setup steps for guidance.

7. Specifikace

8. Záruka a podpora

For detailed warranty information and technical support, please refer to the official HYTE webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případné reklamace.

You can visit the official HYTE store for more information: HYTE Store