Uživatelská příručka k 2MP bullet IP kamerě HiLook IPC-B121H-C

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the HiLook IPC-B121H-C 2MP Bullet IP Camera. This camera is designed for surveillance applications, offering 2-megapixel resolution, a 2.8mm fixed lens, 30-meter infrared night vision, and an IP67 weather-resistant rating. It supports Power over Ethernet (PoE) for simplified installation and H.265+ video compression for efficient storage.

2. Konec produktuview

The HiLook IPC-B121H-C is a compact bullet-style IP camera. Familiarize yourself with its components before installation.

Obrázek 2.1: Boční strana view of the HiLook IPC-B121H-C 2MP Bullet IP Camera, showing the main body and integrated mounting bracket.

Obrázek 2.2: Přední strana view of the camera, highlighting the lens and infrared illuminators.

2.1 Obsah balení

Po vybalení zkontrolujte, zda jsou přítomny všechny položky:

• HiLook IPC-B121H-C IP Camera
• Montážní šrouby a hmoždinky
• Montážní šablona
• Rychlý průvodce (tento návod)

2.2 Součásti kamery

• Čočka: 2.8mm fixed lens for wide-angle viewIng.
• IR LED: Infrared illuminators for night vision up to 30 meters.
• Bydlení: IP67-rated metal casing for outdoor protection.
• Montážní základna: Nastavitelný držák pro montáž na stěnu nebo strop.
• Kabely: Integrated Ethernet (PoE) and power input cables.

Obrázek 2.3: Úhlové view of the camera, showing the integrated cables for power and network connection.

3. Nastavení

3.1 Montáž fotoaparátu

1. Vyberte umístění: Choose a suitable wall or ceiling location that provides the desired field of view and is within reach of network cabling. Ensure the surface can support the camera's weight.
2. Použijte montážní šablonu: Affix the provided mounting template to the chosen surface. Drill pilot holes according to the template.
3. Zajistěte základnu: Attach the camera's mounting base to the surface using the supplied screws and wall plugs.
4. Upravit úhel: Loosen the adjustment screws on the bracket to position the camera for optimal viewing. Tighten the screws once the desired angle is achieved.

Obrázek 3.1: Boční strana view kamery, znázorňující nastavitelný montážní držák.

Obrázek 3.2: Spodní část view of the camera, showing the mounting holes on the base and the cable entry point.

3.2 Zapojení a napájení

The camera supports Power over Ethernet (PoE) for simplified installation, allowing both power and data to be transmitted over a single Ethernet cable.

1. PoE připojení: Connect an Ethernet cable from a PoE-enabled switch or NVR to the camera's Ethernet port. This will provide both power and network connectivity.
2. Alternativní napájení (pokud se nepoužívá PoE): If PoE is not available, connect a 12V DC power adapter (not included) to the camera's power input cable. Then, connect an Ethernet cable from your network to the camera's Ethernet port.

Obrázek 3.3: Zadní strana view of the camera, showing the Ethernet and power input cables.

3.3 Počáteční konfigurace

After physical installation and power-up, configure the camera for network access and video settings.

1. Internetové připojení: Ensure the camera is connected to your local network.
2. Instalace softwaru: Install the HiLook SADP Tool or client software on a computer connected to the same network.
3. Aktivace kamery: Use the SADP Tool to discover the camera. Activate it by setting a strong password.
4. Konfigurace IP adresy: Assign a static IP address or enable DHCP for the camera using the SADP Tool or web rozhraní.
5. Přístup Web Rozhraní: Otevřete a web prohlížeč a zadejte IP adresu kamery pro přístup k jejímu web interface. Log in with the newly set password.

4. Ovládání fotoaparátu

4.1 Živě View

Access the live video feed from your camera through a web browser or compatible NVR/VMS software.

• Web prohlížeč: Log into the camera's web interface. Navigate to the 'Live View' section to see the real-time video feed.
• NVR/VMS: Add the camera to your Network Video Recorder (NVR) or Video Management Software (VMS) using its IP address and credentials.

4.2 Nahrávání a ukládání

Configure recording settings to capture and store video footage.

• Plán nahrávání: Set up continuous recording or schedule recording based on specific times.
• Detekce pohybu: Configure motion detection zones and sensitivity to trigger recordings only when activity is detected.
• Skladování: Recordings are typically stored on an NVR, a network-attached storage (NAS) device, or a local SD card (if supported by the camera model).

4.3 Přehrávání

Review zaznamenané footage to investigate events.

• NVR/VMS Playback: Use the playback function of your NVR or VMS to browse and view nahrané video.
• Web Interface Playback: Some camera models allow direct playback of footage stored on an SD card via the web rozhraní.

4.4 Noční vidění

Kamera se za zhoršených světelných podmínek automaticky přepne na infračervené noční vidění.

• Automatická aktivace: Built-in sensors detect ambient light levels and activate the IR LEDs when necessary.
• Rozsah: Provides clear black and white video up to 30 meters in complete darkness.

5. Údržba

5.1 Čištění

Regular cleaning ensures optimal performance and image quality.

• Čočka: Gently wipe the lens with a soft, clean, lint-free cloth. For stubborn dirt, use a lens cleaning solution. Avoid abrasive materials.
• Bydlení: Vyčistěte kryt fotoaparátu pomocíamp tkanina. Nepoužívejte silné čisticí prostředky nebo rozpouštědla.

5.2 aktualizací firmwaru

Keep your camera's firmware updated to benefit from new features, performance improvements, and security patches.

• Zkontrolovat aktualizace: Periodically visit the HiLook official website for the latest firmware versions for your specific model.
• Postup aktualizace: Follow the instructions provided with the firmware update package. Ensure a stable power supply during the update process to prevent damage.

5.3 Environmentální hlediska

The camera is designed for outdoor use with an IP67 rating.

• Teplota: Operate the camera within its specified temperature range.
• vlhkost: The IP67 rating protects against dust and water immersion up to 1 meter for 30 minutes. Ensure all cable connections are properly sealed.

6. Řešení problémů

V této části naleznete běžné problémy a jejich řešení.

6.1 Žádný video kanál

• Zkontrolujte napájení: Ensure the camera is receiving power, either via PoE or a 12V DC adapter.
• Internetové připojení: Verify the Ethernet cable is securely connected and the network is operational. Check network indicator lights on the camera and switch.
• IP adresa: Confirm the camera's IP address is correct and not conflicting with other devices on the network. Use the SADP Tool to verify.

6.2 Špatná kvalita obrazu

• Čistá čočka: Dust or smudges on the lens can degrade image quality. Refer to Section 5.1 for cleaning instructions.
• Světelné podmínky: Ensure adequate lighting. If in low light, verify IR LEDs are functioning.
• Soustředit: While this camera has a fixed lens, ensure it is not obstructed.

6.3 Problémy s přístupem k síti

• Ping test: From a computer on the same network, try to ping the camera's IP address to confirm network connectivity.
• Firewall: Ensure no firewall settings are blocking communication with the camera.
• Router/Přepínač: Restart your network router or switch.

6.4 Obnovení továrního nastavení

If issues persist, a factory reset may resolve them. Consult the HiLook support website or product documentation for the exact reset procedure for your model, as it often involves a physical button or specific software steps.

7. Specifikace

Detailed technical specifications for the HiLook IPC-B121H-C 2MP Bullet IP Camera.