X-PRO Leopard 125 ATV Instruction Manual

Zavedení

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your X-PRO Leopard 125 ATV. Please read this manual thoroughly before operating the vehicle to ensure proper use and to prevent injury or damage.

Figure 1: X-PRO Leopard 125 ATV (Side View)

This image displays the X-PRO Leopard 125 ATV from a side perspective, highlighting its blue body, large tires, and overall structure.

Bezpečnostní informace

Operating an ATV can be hazardous. Always follow safety guidelines to minimize risks.

• Always wear an approved helmet, eye protection, and protective clothing.
• Never operate the ATV under the influence of alcohol or drugs.
• Do not carry passengers on this ATV. It is designed for single-rider operation.
• Supervise young riders closely.
• Read and understand all warning labels on the ATV.
• This 125cc ATV cannot be sold or registered in California due to specific state regulations.

Figure 2: X-PRO Leopard 125 ATV (Front View)

Tento obrázek ukazuje přední stranu view of the X-PRO Leopard 125 ATV, highlighting the headlights, front bumper, and tire tread.

Konec produktuview

The X-PRO Leopard 125 ATV is a 4-wheel quad designed for recreational use. It features a 125cc, 4-stroke, air-cooled engine with an automatic transmission and reverse gear, making it suitable for entry-level riders.

Klíčové vlastnosti:

• Motor: 125cc, 4-stroke, air-cooled, single cylinder.
• Přenos: Automatic with reverse gear for easy maneuverability.
• pneumatiky: Large 19" front and 18" rear tires for varied terrain.
• brzdy: Front drum brake and rear disc brake for reliable stopping power.
• Rozměry: Overall Length: 59.84", Width: 37", Height: 36.2".
• Bezpečnostní funkce: Equipped with headlight and tail light.

Nastavení a montáž

The X-PRO Leopard 125 ATV requires some assembly upon delivery. It is recommended that assembly be performed by an adult with mechanical aptitude or by a qualified technician.

Montážní kroky:

1. Rozbalení: Carefully remove the ATV from its packaging. Inspect for any shipping damage.
2. Instalace řídítek: Attach the handlebar brackets securely.
3. Montáž kola: Install all four wheels. Ensure lug nuts are tightened to specifications.
4. Instalace do racku: If included, attach the front and rear racks.
5. Instalace zadního tlumiče: Install the rear shock absorber.
6. Připojení baterie: Connect the battery. Ensure correct polarity.
7. Kontroly provozních kapalin: Before first use, check engine oil level, brake fluid, and tire pressure.

Refer to the included assembly guide for detailed instructions and torque specifications for all fasteners.

Figure 3: X-PRO Leopard 125 ATV Shipping Box

This image shows the shipping box for the X-PRO Leopard 125 ATV, indicating it is ready for assembly.

Návod k obsluze

Familiarize yourself with all controls before starting the engine.

Startování motoru:

1. Ensure the ATV is on a level surface and the parking brake is engaged.
2. Otočte klíček zapalování do polohy „ON“.
3. Pokud je motor studený, zatlačte sytič.
4. Press the electric start button. Release the button once the engine starts.
5. Allow the engine to warm up for a few minutes before riding. Disengage the choke as the engine warms.

Riding the ATV:

• Automatická převodovka: This ATV features an automatic transmission, eliminating the need for manual gear shifting. Simply apply throttle to move forward.
• Zpátečka: To engage reverse, stop the ATV completely and select the reverse gear using the designated control (refer to the ATV's specific controls for location).
• brzdění: Use both front (drum) and rear (disc) brakes simultaneously for effective stopping.
• Řízení: Practice steering at low speeds in an open area before attempting higher speeds or varied terrain.

Údržba

Regular maintenance is crucial for the longevity and safe operation of your ATV.

Rutinní kontroly:

• Motorový olej: Check oil level before each ride. Change oil according to the maintenance schedule in the full owner's manual.
• Tlak v pneumatikách: Verify tire pressure before each ride. Front tires: 19X7-8, Rear tires: 18X9.5-8. Consult the tire sidewall for recommended pressure.
• brzdy: Inspect brake levers, cables, and pads for wear and proper function. Adjust as needed.
• Řetěz: Check chain tension and lubricate regularly.
• Spojovací materiál: Pravidelně kontrolujte utažení všech matic, šroubů a spojovacího materiálu.
• Vzduchový filtr: Clean or replace the air filter as recommended to ensure optimal engine performance.

Odstraňování problémů

Tato část obsahuje základní kroky pro řešení běžných problémů. V případě složitých problémů se obraťte na kvalifikovaného technika.

• Motor se nedaří nastartovat:
  • Zkontrolujte hladinu paliva.
  • Ensure ignition key is "ON".
  • Zkontrolujte připojení baterie a nabijte ji.
  • Zkontrolujte zapalovací svíčku, zda není znečištěná nebo poškozená.
• Ztráta výkonu:
  • Check air filter for blockage.
  • Ensure proper fuel flow.
  • Verify spark plug condition.
• Brzdy neúčinné:
  • Zkontrolujte brzdové destičky, zda nejsou opotřebované.
  • Check brake fluid level (for disc brake).
  • Adjust brake cables (for drum brake).

Specifikace

Informace o záruce

Specific warranty details for the X-PRO Leopard 125 ATV are typically provided with your purchase documentation. Please refer to the warranty card or literature included in your product packaging for terms, conditions, and registration procedures. For warranty claims or inquiries, contact the manufacturer directly.

Zákaznická podpora

For technical assistance, parts, or further support regarding your X-PRO Leopard 125 ATV, please contact X-PRO customer service. Contact information can usually be found on the manufacturer's webwebu nebo v dokumentaci k produktu.

Můžete také navštívit X-PRO Store on Amazon pro další informace o produktu a zdroje.