isinwheel U7 Electric Bike Instruction Manual

1. Úvod

Welcome to the official instruction manual for your new isinwheel U7 Electric Bike. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your e-bike. Please read this manual thoroughly before your first ride and keep it for future reference.

Důležité bezpečnostní informace

• Při jízdě na elektrokole vždy noste helmu.
• Perform a pre-ride safety check before each use, including brakes, tires, and battery.
• Seznamte se s místními dopravními předpisy a předpisy pro elektrokola.
• Neprovozujte elektrokolo pod vlivem alkoholu nebo drog.
• Před jízdou se ujistěte, že jsou všechny komponenty bezpečně upevněny.

2. Obsah balení

Upon unboxing, verify that all the following items are included in your package:

• isinwheel U7 Electric Bike (partially assembled)
• Dual Ebike Cargo Rack (front and rear)
• Elektrická pumpa na kolo
• Sada nářadí
• Nabíječka baterií
• Bicycle Horn
• Uživatelská příručka

3. Nastavení a montáž

Your isinwheel U7 E Bike comes partially assembled. Follow these steps to complete the assembly:

1. Rozbalení: Carefully remove all components from the packaging. Keep all packing materials until assembly is complete.
2. Montáž předního kola: Attach the front wheel to the fork using the provided quick-release skewer or bolts. Ensure the disc brake rotor is correctly aligned with the caliper.
3. Instalace řídítek: Insert the handlebar stem into the fork tube and tighten the bolts securely. Adjust the handlebar to a comfortable riding position.
4. Upevnění pedálu: Identify the left (L) and right (R) pedals. Screw the pedals into the crank arms by hand, then tighten them firmly with a wrench. Note that the left pedal tightens counter-clockwise.
5. Sedlovka a sedlo: Insert the seat post with the saddle into the frame. Adjust the height for comfortable pedaling and secure it with the quick-release lever.
6. Fender and Light Installation: Attach the front and rear fenders. Install the front headlight and rear tail light to their designated positions, ensuring all connections are secure.
7. Cargo Rack Assembly: Securely attach the front and rear cargo racks using the provided hardware.
8. Huštění pneumatik: Inflate the tires to the recommended pressure, typically around 35 PSI, using the included pump. Check the tire sidewall for exact pressure recommendations.

Image: Close-up of a hand attaching the front wheel to the e-bike fork, securing the axle nuts.

Image: A person installing the handlebars onto the e-bike's stem, tightening the bolts with an Allen key.

Image: A person attaching the front cargo rack to the e-bike's head tube, securing it with bolts.

4. Návod k obsluze

Zapnutí/vypnutí

• To power on the e-bike, long press the power button on the LCD display.
• To power off, long press the power button again until the display turns off.

Speed Modes and Pedal Assist

The isinwheel U7 offers 5 levels of pedal assist and a full-throttle mode:

• Use the '+' and '-' buttons on the display to cycle through assist levels 1 to 5.
• Level 1 provides minimal assistance, while Level 5 offers maximum motor power, allowing for speeds up to 20 mph with minimal pedaling.
• The throttle can be used independently or in conjunction with pedal assist for an effortless ride.

Řazení převodových stupňů

The e-bike is equipped with a 7-speed gear system:

• Use the Shimano 7-speed derailleur shifter on the right handlebar to change gears.
• Pro stoupání do kopce řaďte na nižší převodové stupně a pro rovný terén nebo jízdu z kopce na vyšší převodové stupně.

Světla a klakson

• Press the light button on the handlebar controls to turn the front headlight and rear tail light on/off.
• The rear tail light also functions as a brake light, illuminating brighter when brakes are applied.
• Press the horn button to alert pedestrians or other riders.

Image: Close-up of the e-bike's smart LCD display showing speed, battery level, and assist mode, alongside the non-slip grip and accelerator on the handlebar.

5. Baterie a nabíjení

The isinwheel U7 features a removable 48V 10.4Ah battery for convenient charging.

Vyjmutí a instalace baterie

• To remove the battery, unlock it with the provided key and use the seat lever to tilt the seat forward. Gently slide the battery out of its compartment.
• To install, slide the battery back into the compartment, ensuring it clicks into place, then lock it with the key.

Nabíjení baterie

• Connect the charger to the battery's charging port (located under a safety cover).
• Plug the charger into a standard wall outlet. The indicator light on the charger will show charging status (red for charging, green for fully charged).
• Plné nabití obvykle trvá 3-4 hodiny.

Image: Close-up of the removable 48V 10.4Ah battery, highlighting its integrated handle and charging port.

Image: The e-bike battery connected to its charger, with the charger plugged into a wall outlet, indicating the charging process.

6. Údržba

Tlak v pneumatikách

• Regularly check tire pressure. Maintain approximately 35 PSI for optimal performance and safety.
• The 20" x 3" fat tires are designed for various terrains, but proper inflation is crucial.

Brzdový systém

• Inspect the dual disc brakes regularly for wear and proper function.
• Ujistěte se, že brzdové páky citlivě reaguje a poskytují dostatečný brzdný účinek.

Obecná péče

• Udržujte své elektrokolo čisté otřením čisticím prostředkemamp hadříkem. Nepoužívejte vysokotlaké vodní trysky přímo na elektrické součástky.
• Store the e-bike in a dry, cool place, away from direct sunlight and extreme temperatures.

Obrázek: Detailní průřez view illustrating the anti-puncture, inner tube, and outer tire layers of the 20" x 3" fat tire, designed for durability across various terrains.

7. Řešení problémů

If you encounter issues with your isinwheel U7 E Bike, refer to the following common problems and solutions:

• Elektrokolo se nezapíná: Ensure the battery is fully charged and properly installed. Check that the key is turned to the 'on' position.
• Motor nepomáhá: Verify that pedal assist is enabled on the LCD display and set to a level above zero. Check all cable connections for looseness.
• Prázdná pneumatika: Inspect the tire for punctures. If a puncture is found, repair or replace the inner tube. Ensure proper tire pressure is maintained.
• Brzdy nereagují: Check brake cables for tension and ensure brake pads are not worn out. Adjust as necessary.

8. Specifikace

Image: Visual guide illustrating the dimensions of the isinwheel U7 Electric Bike and recommended rider height range (5'3"-6'3").

9. Záruka a podpora

Omezená záruka

The isinwheel U7 Electric Bike comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions.

Zákaznická podpora

For any questions, technical assistance, or warranty claims, please contact isinwheel customer support. Manufacturer contact information: Shenzhen Xincheng Times Technology Co.,Ltd.