AKIA SCREENS AK-ELT120H

Uživatelská příručka k motorizovanému projekčnímu plátnu Akia Screens AK-ELT120H

Model: AK-ELT120H

1. Úvod

Thank you for choosing the Akia Screens AK-ELT120H Motorized Tab-Tension Projector Screen. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new projector screen. Please read this manual thoroughly before use and retain it for future reference.

Klíčové vlastnosti:

  • 120-inch Diagonal, 16:9 Aspect Ratio: Poskytuje velký viewing area suitable for home theater and commercial applications.
  • CineWhite P Material: 1.0 gain flexible front projection material with a 180-degree viewing angle, 4K/8K Ultra HD ready, and ISF Certified for accurate color reproduction. Features a black backing to eliminate light penetration.
  • Systém napínání Tab-Tension: Ensures a flat, ripple-free projection surface for optimal image quality.
  • Motorizovaný provoz: Features a silent, energy-efficient synchronized motor for smooth screen deployment and retraction.
  • Versatile Control System: Includes Infrared (IR) remote, wall box controller with built-in IR sensor, and RJ50 Port for wired 12-volt trigger integration. User-friendly programmable vertical drop position.
  • Flexibilita instalace: Durable black casing with flush wall sliding brackets for easy wall or ceiling installation and horizontal centering.
  • Projector Compatibility: Compatible with Ultra Short Throw (UST), Short Throw, and Standard Throw projectors.

2. Bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k požáru, úrazu elektrickým proudem nebo jinému zranění či poškození.

  • Read all instructions before operating the screen.
  • Do not allow children to operate the screen without supervision.
  • Ensure the screen is securely mounted according to the installation instructions to prevent it from falling.
  • Do not obstruct the movement of the screen during operation. Keep hands and objects clear of the screen path.
  • Před prováděním jakékoli údržby nebo čištění odpojte napájení.
  • Do not expose the screen to moisture or extreme temperatures.
  • Používejte pouze dodaný napájecí kabel a příslušenství.
  • Pokud je napájecí kabel poškozen, musí jej vyměnit výrobce, jeho servisní zástupce nebo podobně kvalifikovaná osoba, aby se předešlo nebezpečí.

3. Obsah balení

Před zahájením instalace se ujistěte, že jsou všechny komponenty přítomny:

  • Motorized Tab-Tension Projector Screen (AK-ELT120H)
  • Infračervené (IR) dálkové ovládání
  • Wall Box Controller
  • Napájecí kabel
  • Installation Kit (mounting brackets, screws, anchors)
  • RJ50 Cable (for 12-volt trigger feature)
Akia Screens AK-ELT120H package contents including screen, two remotes, and a cable.

Image: Main product image showing the motorized screen, two remote controls, and a cable, representing the typical package contents.

4. Nastavení a instalace

The AK-ELT120H screen is designed for wall or ceiling installation. It ships fully assembled and is plug-and-play ready. Professional installation is recommended.

4.1 Úvahy o místě montáže

  • Ensure the mounting surface (wall or ceiling) can support the screen's weight (approximately 28.7 pounds).
  • Locate wood studs or use appropriate anchors for secure installation.
  • Consider the projector's throw distance and offset to ensure the image aligns correctly with the screen.
  • Ensure a power outlet is within reach of the screen's power cord.

4.2 kroky instalace

  1. Připevněte montážní konzoly: Secure the flush wall sliding brackets to your chosen wall or ceiling location. These brackets allow for horizontal adjustment to center the screen.
    Close-up of the Akia Screens mounting bracket on the screen casing.

    Image: Detail of the mounting bracket attached to the screen casing, illustrating how it connects for installation.

  2. Namontujte obrazovku: Carefully lift the screen and attach it to the installed brackets. Slide the screen horizontally as needed to achieve proper centering.
  3. Připojte napájení: Plug the screen's power cord into a standard electrical outlet.
  4. Optional 12-Volt Trigger Connection: If using a projector with a 12-volt trigger output, connect the RJ50 cable from the projector to the RJ50 port on the screen's wall box controller. This allows the screen to automatically deploy/retract with your projector's power cycle.
Akia Screens motorized screen control system with remote and wall box controller.

Image: The control system, showing the remote and the wall box controller, which includes the RJ50 port for the 12-volt trigger.

5. Provoz

Your Akia Screens motorized projector screen can be operated using the included IR remote control or the wall box controller.

5.1 Používání infračerveného dálkového ovladače

  • Point the IR remote control towards the screen's IR sensor (located on the wall box controller).
  • Stiskněte tlačítko UP button to raise the screen.
  • Stiskněte tlačítko DOLŮ button to lower the screen.
  • Stiskněte tlačítko ZASTÁVKA button to pause the screen at any desired position.

5.2 Using the Wall Box Controller

  • The wall box controller features an up/stop/down toggle switch for manual operation.
  • Přesuňte spínač UP to raise the screen.
  • Přesuňte spínač DOLŮ to lower the screen.
  • Return the switch to the STŘEDNÍ position to stop the screen.

5.3 Programmable Vertical Drop Position

The screen allows you to set a custom lower limit for the screen's drop position. Refer to the detailed instructions included with your screen for programming this feature. This is useful for optimizing the viewing area for your specific projector setup.

6. Údržba

Správná údržba zajistí dlouhou životnost a optimální výkon projekční plochy.

  • Čištění povrchu obrazovky: The CineWhite P material is easy to clean. Gently wipe the screen surface with a soft, damp cloth using mild soap and water. Avoid abrasive cleaners or harsh chemicals, as these can damage the screen material.
  • CasinČištění: Otřete obrazovku casinměkkým, suchým hadříkem odstraňte prach.
  • Kontrola motoru: Periodically check the motor for any unusual noises or signs of wear. If any issues arise, contact customer support.
  • Generální inspekce: Regularly inspect the mounting hardware and cables to ensure they are secure and undamaged.

7. Řešení problémů

If you encounter issues with your Akia Screens projector screen, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Screen does not respond to remote/wall switch.No power, remote batteries dead, IR sensor blocked, remote not paired.
  • Check if the screen is plugged into a working power outlet.
  • Replace batteries in the IR remote.
  • Ensure no objects are blocking the IR sensor on the wall box controller.
  • Refer to the full manual for remote pairing instructions if applicable.
Screen stops halfway or moves erratically.Motor malfunction, obstruction, power fluctuation.
  • Check for any physical obstructions in the screen's path.
  • Unplug the screen for 5 minutes, then plug it back in to reset the motor.
  • Pokud problém přetrvává, kontaktujte zákaznickou podporu.
Wrinkles or ripples on the screen surface.Initial setup, environmental factors.
  • The tab-tension system is designed to minimize wrinkles. Minor wrinkles may dissipate over time with regular use.
  • Ensure the screen is not exposed to extreme temperature changes.
  • If severe, contact customer support.
12-volt trigger not working.Incorrect connection, projector setting.
  • Verify the RJ50 cable is securely connected to both the projector and the screen's wall box controller.
  • Check your projector's settings to ensure the 12-volt trigger output is enabled.

8. Specifikace

FunkceDetail
Číslo modeluAK-ELT120H
Typ obrazovkyMotorized Tab-Tension Projector Screen
Velikost úhlopříčky120 palců
Poměr stran16:9
Viewing Area (H x W)58.8 cm V x 104.5 cm Š
Overall Size (H x W)77.6 cm V x 121.6 cm Š
Materiál obrazovkyCineWhite P (1.0 Gain, Flexible Front Projection)
Viewúhel180 stupňů
Podpora rozlišení4K/8K Ultra HD Ready
CertifikaceCertifikace ISF pro přesnou reprodukci barev
Projector CompatibilityUltra Short Throw, Short Throw, Standard Throw
Možnosti ovládáníIR Remote, Wall Box Controller, 12-Volt Trigger (RJ50)
CasinMateriálKov
Hmotnost položky28.7 libry
Typ montážeMontáž na stěnu nebo na strop
Diagram showing the dimensions of the Akia Screens 120-inch motorized projector screen.

Image: Dimensional diagram of the AK-ELT120H screen, indicating 120-inch diagonal, 16:9 aspect ratio, 121.6" overall width, and 77.6" overall height.

Akia Screens CineWhite P material features and ISF certification.

Image: Visual representation of the CineWhite P material, highlighting its flexible matte white surface, 1.0 gain, 180-degree viewing angle, black backing, and ISF certification.

9. Záruka a podpora

Akia Screens provides comprehensive support for its products.

  • Záruka výrobce: The product comes with a 2-Year/3-Year ENR-G Manufacturer's Warranty by Elite Screens (if purchased NEW). Elite Screens is an ISO9001 manufacturer since 2004.
  • Technická podpora: Doživotní technická podpora je k dispozici e-mailem nebo telefonicky od profesionálního servisního týmu Elite Screens.

For warranty claims, technical assistance, or further inquiries, please contact Akia Screens customer service or visit their official webmísto.

Akia Screens customer support information with US flag, warranty badge, and tech support badge.

Image: Graphic detailing Akia Screens' US-based support, 2-year warranty, and lifetime technical support via email and web povídání.

Související dokumenty - AK-ELT120H

Předview Uživatelská příručka a instalace pro ruční výsuvné projekční plátno AKIA SCREENS
Komplexní uživatelská příručka pro ruční výsuvná projekční plátna AKIA SCREENS. Obsahuje pokyny k instalaci, tipy pro obsluhu, rady k údržbě a důležitá upozornění pro optimální výkon.
Předview Uživatelská příručka k elektrickému projekčnímu plátnu Akia Screens Motorized Series
Tato uživatelská příručka obsahuje důležitá bezpečnostní opatření, pokyny k instalaci a podrobnosti o obsluze elektrického nástěnného/stropního projekčního plátna Akia Screens Motorized Series, typ E (RC1) V1.0. Zahrnuje montáž na stěnu a strop, ovládání dálkovým ovladačem, funkci kabelového spouštění a prohlášení o vyloučení odpovědnosti za materiál.
Předview Elite Screens Kestrel Tab-Tension Series: Product White Paper
Comprehensive product white paper detailing the Elite Screens Kestrel Tab-Tension Series electric floor-rising projection screen, covering its design, features, specifications, control systems, safety guidelines, and company information.
Předview Uživatelská příručka EPV Dark Star Max UST-FR: Bezpečnostní opatření, údržba, provoz a instalace
Tato uživatelská příručka obsahuje základní informace o stropní projekční ploše EPV Dark Star Max UST-FR s ochranou proti okolnímu světlu. Zahrnuje bezpečnostní opatření, údržbu projekční plochy, shodu s předpisy FCC, identifikaci součástí, způsoby ovládání, dálkové ovládání, pokyny k bateriím, funkce proti skřípnutí a důležité pokyny pro umístění projektoru pro optimální výkon.
Předview Uživatelská příručka k elektrickému projekčnímu plátnu Elite Screens Evanesce Tab-Tension řady B do stropu
Komplexní uživatelská příručka pro stropní projekční plátno Elite Screens Evanesce Tab-Tension řady B s elektrickým motorem, které zahrnuje bezpečnostní opatření, obsluhu, ovládací prvky a pokyny k instalaci.