Uživatelská příručka k trojohledovému boroskopu DEPSTECH DS560TL

1. Úvod

This manual provides detailed instructions for the safe and effective use of your DEPSTECH DS560TL Triple Lens Borescope. This device is designed for visual inspection in hard-to-reach areas, featuring a 5-inch IPS display, 1080P HD resolution, and a 16.5ft semi-rigid cable with IP67 waterproof rating. Please read this manual thoroughly before operation.

2. Konec produktuview

2.1 Co je v krabici

• Video Borescope Unit
• 16.5ft Semi-Rigid Cable
• Sturdy Carrying Case
• Accessory Kit (Kickstand, USB Charging Cable, Hook and Magnet)
• Uživatelská příručka

Obrázek 1: Included components of the DEPSTECH DS560TL borescope kit, showing the main unit, probe cable, carrying case, and accessories.

2.2 Klíčové vlastnosti

• Triple Lens Camera System: Features three 1080P HD cameras for comprehensive viewing, allowing seamless toggling between front and side views, or simultaneous dual-view zobrazit.
• 5palcový IPS displej: Poskytuje jasný a podrobný view of inspection areas with high resolution.
• Bluart 3.0 Technology: Enhances image clarity, color accuracy, and low-light performance with adjustable camera lights.
• 16.5ft Semi-Rigid Cable: Offers a balance of flexibility and stiffness for navigating tight spaces and maintaining probe position.
• Vodotěsná sonda IP67: Ensures safe operation in wet environments, suitable for plumbing and sewer inspections.
• Audio and Video Recording: Capture full HD video and audio, supported by an included 32GB TF card for documentation.
• Ergonomický design: Features an ergonomic grip and detachable kickstand for comfortable and stable use.

Obrázek 2: The DEPSTECH DS560TL borescope main unit with its flexible probe cable attached, ready for inspection.

Obrázek 3: An illustration detailing the internal components of the triple lens camera system, highlighting the Bluart 3.0 technology for enhanced clarity.

Obrázek 4: The borescope display showing the dual-view funkce umožňující simultánní viewing from two different camera lenses.

3. Nastavení

3.1 Nabíjení zařízení

1. Connect the provided USB charging cable to the borescope unit's charging port.
2. Druhý konec kabelu USB zapojte do standardního napájecího adaptéru 5V/1A USB (není součástí balení) nebo do portu USB počítače.
3. The charging indicator light will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 3-4 hours.

Obrázek 5: The borescope unit being charged via a USB cable connected to a power outlet.

3.2 Vložení TF karty

The device comes with a 32GB TF card pre-installed. If you need to replace it or ensure it's properly seated:

1. Locate the TF card slot on the side of the borescope unit.
2. Gently push the TF card into the slot until it clicks into place. To remove, push it again until it springs out.

Obrázek 6: Detailní záběr view of the TF card slot on the borescope unit, illustrating how to insert the memory card.

3.3 Připojení kabelu sondy

Ensure the probe cable connector is aligned correctly with the port on the main unit and push firmly until it is securely connected.

3.4 Připevnění příslušenství

The accessory kit includes a hook and a magnet. These can be screwed onto the tip of the camera probe for retrieving small objects or navigating in specific situations.

Obrázek 7: The included hook and magnet accessories, designed to attach to the end of the borescope probe for various tasks.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Pro zapnutí stiskněte a podržte Moc tlačítko, dokud se obrazovka nerozsvítí.
• Chcete-li přístroj vypnout, stiskněte a podržte tlačítko Moc tlačítko, dokud se obrazovka nevypne.

4.2 Navigace v rozhraní

Použijte směrová tlačítka (Up, Dolů, Vlevo, Právo) to navigate through menus and settings. Press the OK tlačítko pro potvrzení výběru.

4.3 Přepínání kamery Views

The DS560TL features three lenses: a front camera and two side cameras. You can switch between these views or activate a dual-view zobrazit.

• Press the camera switch button (often labeled with a camera icon or arrows) to cycle through front, side 1, side 2, and dual-view režimů.
• In dual-view mode, you can typically see the front camera view alongside one of the side camera views.

Obrázek 8: The borescope screen displaying the options for switching between the front and side cameras, or activating a split-screen view.

4.4 Nastavení jasu LED diod

The camera probe is equipped with adjustable LED lights to illuminate dark inspection areas.

• Use the dedicated light adjustment buttons (often labeled with a sun icon or +/-) to increase or decrease the brightness of the LEDs.
• There are typically multiple brightness levels to suit different environments.

Obrázek 9: The borescope probe tip showing the integrated LED lights and an illustration of their adjustable brightness levels.

4.5 Pořizování fotografií a videí

• Chcete-li pořídit fotografii, stiskněte tlačítko Fotografie tlačítko (obvykle označené ikonou fotoaparátu).
• Chcete-li spustit nahrávání videa, stiskněte tlačítko Záznam button (usually marked with a video camera icon). Press it again to stop recording.
• All captured media is saved to the inserted TF card.

4.6 Reviewing Media

• Enter playback mode by pressing the Menu or Přehrávání tlačítko.
• Use the directional buttons to browse through photos and videos.
• Stiskněte OK na view a selected item or play a video.

4.7 Otočení obrazu

The image on the display can be rotated 180 degrees for optimal viewing, especially when the probe is in an inverted position.

• Stiskněte tlačítko Střídat button (often indicated by a circular arrow icon) to flip the image 180 degrees.

Obrázek 10: The borescope screen demonstrating the 180-degree image rotation feature, useful for correcting inverted views during inspection.

5. Údržba

5.1 Cleaning the Probe and Lenses

• After each use, especially in dirty or wet environments, gently wipe the camera probe and lenses with a soft, damp tkanina.
• For stubborn dirt, use a small amount of mild soap solution. Ensure no liquid enters the main unit.
• Do not use abrasive cleaners or solvents, as these can damage the lens and probe material.

5.2 Úložiště zařízení

• Store the borescope unit and probe in the provided sturdy carrying case when not in use.
• Uchovávejte zařízení na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
• Ensure the probe cable is coiled loosely to prevent damage or kinking.

5.3 Péče o baterii

• Chcete-li prodloužit životnost baterie, vyvarujte se častého úplného vybíjení.
• If storing the device for an extended period, charge it to approximately 50% every few months.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

DEPSTECH products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official DEPSTECH webpodrobné záruční podmínky naleznete na webu.

For technical support, troubleshooting assistance, or inquiries regarding your DEPSTECH DS560TL borescope, please contact DEPSTECH customer service through their official webwebu nebo kontaktních informací uvedených na obalu produktu.

Můžete také navštívit DEPSTECH Store on Amazon pro více informací o produktu a zdroje podpory.