AMP Research PowerStep Smart Series Instruction Manual

1. Úvod

The AMP Research PowerStep Smart Series is an innovative electric-powered running board system designed to enhance vehicle accessibility and convenience. These retractable steps automatically extend when the vehicle door is opened and retract out of sight when the door is closed, maintaining the vehicle's clean aesthetic and ground clearance. The Smart Series introduces in-app control, allowing users to override step deployment and manage integrated or auxiliary LED lighting.

This manual provides essential information for the proper installation, operation, and maintenance of your PowerStep Smart Series running boards. Please read all instructions carefully before proceeding with installation or use.

Obrázek 1: AMP Research PowerStep Smart Series running board in its deployed position.

2. Klíčové vlastnosti

• Automatic Deployment: Steps extend automatically when doors open and retract when doors close.
• Smart Series App Control: Utilize a dedicated mobile application (iOS and Android compatible) to extend/retract steps independently and control auxiliary LED lighting.
• Integrované LED osvětlení: Low-profile LED lights illuminate the step and ground for enhanced visibility during entry and exit.
• Odolná konstrukce: Crafted from corrosion-resistant aluminum with stainless steel components for reliable performance in all weather conditions.
• Vysoká nosnost: Engineered to support up to 600 pounds.
• Enhanced Ground Clearance: Steps remain hidden when retracted, preserving the vehicle's ground clearance and aerodynamic profile.
• Technologie proti skřípnutí: Safety feature that cuts power to the motors if resistance is detected during retraction.

3. Co je zahrnuto

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• PowerStep Smart Series Running Boards (Left and Right)
• Vehicle Specific Installation Instructions
• All Necessary Hardware (Brackets, Motors, Wiring Harness, LED Lights, Control Module, Magnetic Door Triggers)

4. Specifikace

5. Nastavení a instalace

Installation of the PowerStep Smart Series requires mechanical aptitude and basic tools. Refer to the detailed vehicle-specific instructions included in your package for precise steps, torque specifications, and wiring diagrams. The general process involves mounting the motor assemblies, routing the wiring harness, connecting to the vehicle's power, and installing the running boards.

Důležité: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the vehicle's battery before starting any electrical work.

5.1. Obecná instalaceview

1. Připravte vozidlo: Park on a level surface, engage parking brake, turn off engine, and disconnect the battery.
2. Mount Motor Assemblies: Attach the motor assemblies to the vehicle's frame using the provided brackets and hardware. Ensure proper alignment and secure fastening.
3. Route Wiring Harness: Carefully route the main wiring harness along the vehicle's frame, avoiding hot or moving components. Connect the motor leads and LED light wires.
4. Připojení k napájení: Connect the main power leads to the vehicle's battery terminals. Install any inline fuses as specified in the instructions.
5. Install Door Triggers: Mount the magnetic door triggers and corresponding magnets to the vehicle's door jambs and doors, respectively. Proper alignment is crucial for correct operation.
6. Install Running Boards: Attach the PowerStep running boards to the motor assemblies. Adjust for desired positioning and tighten all fasteners.
7. Znovu připojte baterii a otestujte: Reconnect the battery and test the operation of the PowerSteps by opening and closing each door. Verify LED lights function correctly.

5.2. Referenční video k instalaci

For a visual guide on the installation process, refer to the official installation video:

6. Návod k obsluze

6.1. Automatický provoz

The PowerStep Smart Series is designed for seamless automatic operation:

• Rozšířit: Open any vehicle door to automatically extend the running boards. The integrated LED lights will illuminate.
• Zatáhnout: Close all vehicle doors to automatically retract the running boards after a short delay. The LED lights will turn off.

Image 2: The PowerStep extends to provide a convenient step for vehicle entry.

6.2. Smart Series App Control

The PowerStep Smart Series app provides enhanced control over your running boards:

1. Stáhnout aplikaci: Stáhněte si oficiální AMP Research Smart Series app from your device's app store (iOS and Android compatible).
2. Spárovat zařízení: Follow the in-app instructions to pair your mobile device with the PowerStep control module via Bluetooth.
3. Override Steps: Use the app to manually extend or retract the steps, overriding the automatic door-activated function. This is useful for cleaning or accessing the roof.
4. Ovládání světla LED: The app allows you to power on/off the integrated LED lights or any auxiliary LED light system connected to the low-profile auxiliary port.

Image 3: Integrated LED lights illuminate the step and ground for safety.

7. Údržba

Regular maintenance ensures optimal performance and longevity of your PowerStep Smart Series running boards:

• Čištění: Periodically clean the running boards and linkage arms with mild soap and water. Avoid abrasive cleaners or harsh chemicals.
• Mazání: Apply a silicone-based lubricant to the pivot points of the linkage arms every 3-6 months, or more frequently in harsh environments, to ensure smooth operation.
• Zkontrolujte kabeláž: Regularly check the wiring harness for any signs of wear, fraying, or damage. Ensure all connections are secure.
• Zkontrolujte spojovací prvky: Periodically inspect all mounting hardware and fasteners for tightness. Re-tighten as necessary.

Image 4: The textured step surface provides secure footing.

8. Řešení problémů

If you experience issues with your PowerStep Smart Series, try the following solutions:

• Steps Not Deploying/Retracting:
  • Check all door connections and magnetic triggers for proper alignment and function.
  • Verify all wiring harness connections are secure and free from damage.
  • Inspect fuses in the wiring harness and vehicle's fuse box.
  • Ujistěte se, že je baterie vozidla plně nabitá a správně připojená.
• Steps Binding or Slow:
  • Clean the linkage arms and step surface to remove dirt or debris.
  • Lubricate all pivot points with a silicone-based lubricant.
  • Zkontrolujte, zda se nevyskytují překážky, které by bránily plynulému pohybu.
• LED světla nefungují:
  • Zkontrolujte připojení kabelů k LED světelným zdrojům.
  • Verify the lights are enabled via the Smart Series app.

Image 5: Inspect the linkage mechanism for smooth operation and proper lubrication.

9. Záruka a podpora

AMP Research stands behind its products with a hassle-free, comprehensive 5-year/60,000 mile warranty. For warranty claims, technical support, or additional assistance, please refer to the contact information provided in your product packaging or visit the official AMP Výzkum webmísto.