Zavedení
Thank you for choosing the RESTMO Sprinkler Timer with Brass Inlet. This programmable water timer is designed to simplify your garden watering tasks, providing automatic control for garden hoses, outdoor faucets, drip irrigation systems, and lawn watering. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.
Obrázek: Přední strana view of the RESTMO Sprinkler Timer, showing the digital display and control dial.
Bezpečnostní informace
- Do not immerse the timer in water. It is IP54 waterproof, meaning it is protected against dust and splashing water, but not full immersion.
- Use only 2 x AAA 1.5V alkaline batteries (not included). Do not mix old and new batteries or different types of batteries.
- Pokud časovač nebudete delší dobu používat, vyjměte baterie, abyste zabránili vytečení.
- Protect the timer from freezing temperatures. Disconnect and store indoors during winter.
- Ensure all connections are tight to prevent leaks. Teflon tape is recommended for a secure seal.
Konec produktuview
The RESTMO Sprinkler Timer features a user-friendly design with a large LCD screen and intuitive controls.
Image: Diagram illustrating the various components of the sprinkler timer, including the brass inlet, LCD screen, control dial, and buttons.
Klíčové komponenty:
- Pure Brass Inlet Thread: 360-degree rotatable for easy installation, with a built-in metal filter washer to prevent debris.
- Velký LCD displej: Displays current time, next watering time, and battery status.
- Volič časovače: Used to select different settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
- Tlačítko OK/Manuální: Confirms settings and activates manual watering.
- +/- tlačítka: Adjust values and activate rain delay.
- Waterproof Battery Compartment: Vhodné pro 2 baterie AAA.
Obrázek: Detail view of the 360-degree swivel pure brass inlet, highlighting its design and durability.
Nastavení a instalace
Follow these steps to install your RESTMO Sprinkler Timer:
Image: Four-panel diagram showing the installation process: installing batteries, attaching to faucet, attaching hose, and setting the program.
- Nainstalujte baterie: Open the waterproof battery compartment. Insert 2 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity. Close the compartment securely. Keep your hands dry during this process.
- Připojení k vodovodnímu kohoutku: Screw the timer's brass inlet onto your 3/4" outdoor faucet. Hand-tighten firmly. For a leak-proof connection, wrap Teflon tape around the faucet threads before attaching the timer.
- Připojte hadici: Connect your garden hose to the 3/4" hose connection at the bottom of the timer. Ensure it is tightly secured.
- Turn on Faucet: Open your faucet fully. The timer is designed to operate under water pressure.
Návod k obsluze
1. Nastavte Hodiny
This step sets the current time on the timer.
- Otočte voličem na NASTAVIT HODINY.
- Stiskněte tlačítko +/- tlačítky pro nastavení aktuální hodiny a minuty.
- Stiskněte tlačítko OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
2. Set Start Time
This sets when your automatic watering program will begin.
- Otočte voličem na ČAS STARTU.
- Stiskněte tlačítko +/- tlačítky nastavte požadovaný čas začátku.
- Stiskněte tlačítko OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
3. Set Watering Duration (How Long)
This sets how long the watering will last for each cycle.
- Otočte voličem na JAK DLOUHO.
- Stiskněte tlačítko +/- buttons to set the watering duration from 1 minute to 239 minutes.
- Stiskněte tlačítko OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
4. Set Watering Frequency (How Often)
This sets how often the watering cycles will repeat.
- Otočte voličem na JAK ČASTO.
- Stiskněte tlačítko +/- buttons to set the watering frequency: from 1 hour to 12 hours, or from 1 day to 7 days.
- Stiskněte tlačítko OK button to switch between hour and day/hour setup.
- Turn the dial to any other position to save changes.
Image: Visual guide showing the range for 'How Long' (1-239 mins) and 'How Often' (1hr-7 days) settings.
5. Automatic Watering
Once programmed, turn the dial to ON to activate the automatic watering schedule. The LCD screen will display the remaining time of the current watering program when watering is active. When watering is off, the screen will flash between the next watering start time and the current time.
Image: Depicts the timer set to 'ON' for automatic watering, with a visual representation of the watering duration and frequency settings.
6. Ruční zavlažování
Ruční zavlažování bez ovlivnění naprogramovaného plánu:
- With the dial at ON, dlouze stiskněte OK/MANUÁLNĚ tlačítko na 3 sekund.
- Stiskněte tlačítko +/- buttons to select the desired manual watering duration (1 to 239 minutes).
- Stiskněte OK to switch between hour and minute. The setup flashes 3 times and manual watering will automatically start.
- Chcete-li zrušit ruční zavlažování, otočte knoflík do polohy VYPNUTO a pak zpět do ON.
Image: Shows how to activate manual watering and adjust its duration, with a visual of water flowing from the hose.
7. Zpoždění kvůli dešti
To temporarily pause your watering schedule due to rain or other reasons:
- With the dial at ON, dlouze stiskněte ZPOŽDĚNÍ + tlačítko na 3 sekund.
- Stiskněte tlačítko +/- tlačítky vyberte zpoždění 12, 24, 48 nebo 72 hodin.
- Stiskněte OK or wait for 3 seconds to start the rain delay.
- To cancel rain delay, turn the dial to VYPNUTO a pak zpět do ON.
Image: Illustrates the rain delay function with options for 12, 24, 48, and 72-hour delays.
8. Stop Watering
Pro úplné zastavení všech zavlažovacích programů:
- Otočte voličem na VYPNUTO. The timer will keep off until the dial is turned to ON znovu.
Image: Shows the timer dial set to 'OFF', indicating that watering has stopped.
Údržba
- Čištění: Periodically check the brass inlet filter washer for debris and clean it to ensure optimal water flow.
- Výměna baterie: When the battery indicator on the LCD screen shows low power, replace the batteries promptly to avoid interruption of watering schedules.
- Zima: Before the first frost, disconnect the timer from the faucet and hose. Remove the batteries and store the timer indoors in a dry, protected area to prevent damage from freezing.
Odstraňování problémů
Zde jsou některé běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Časovač se nezapíná/LCD displej je prázdný | Vybité nebo nesprávně vložené baterie. | Replace batteries with new 2 x AAA alkaline batteries, ensuring correct polarity. |
| Water not flowing/Timer not watering | Faucet is off; low water pressure; clogged filter; incorrect program settings; valve stuck. | Ensure faucet is fully open. Check water pressure (10-120 psi required). Clean the inlet filter. Verify program settings (start time, duration, frequency). Reset the valves (see video below). |
| Voda unikající z přípojek | Loose connections; missing/damaged washer; insufficient Teflon tape. | Tighten all connections. Check for and replace any missing or damaged rubber washers. Apply more Teflon tape to faucet threads. |
| Časovač nedodržuje plán | Incorrect clock setting; program not activated (dial not on ON); rain delay active. | Re-set the current time. Ensure the dial is set to ON. Check if rain delay is active and cancel if necessary. |
How to Reset the Valves:
If the timer's internal valves are not functioning correctly, you may need to reset them. This process involves cycling water through the timer manually to clear any obstructions or reset the mechanism.
Video: A step-by-step guide on how to reset the internal valves of the RESTMO Sprinkler Timer to ensure proper water flow.
Specifikace
- Model: O-HT
- Materiál: Mosaz, kov
- Vstupní závit: 3/4" NH (Pure Brass)
- Hose Fitting: 3/4"
- Délka zalévání: 1-239 minut
- Frekvence zalévání: 1-12 hours or 1-7 days
- Možnosti zpoždění po dešti: 12/24/48/72 hodin
- Max. Průtok: 10 GPM (35 l/min)
- Pracovní tlak: 10–120 PSI (0.5–8.0 barů)
- Rozsah teplot: 38 až 120 °F (3 až 50 °C)
- Hodnocení voděodolnosti: IP54
- Zdroj napájení: 2 x alkalické baterie AAA (nejsou součástí balení)
- Rozměry produktu: 3.94"H x 3.94"Š x 1.57"V
- Hmotnost položky: 5 uncí
Záruka a podpora
RESTMO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo webwebu. Náš tým zákaznických služeb je vám k dispozici, abyste měli jakékoli dotazy nebo obavy.
