Zavedení
Welcome to the X-PRO 125cc Adult Gas Motorcycle instruction manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new motorcycle. Please read this manual thoroughly before operating the vehicle to ensure your safety and the longevity of the product.
This motorcycle is designed for street use only and cannot be ridden on highways. Always adhere to local traffic laws and regulations.
Bezpečnostní informace
Your safety is paramount. Always wear appropriate safety gear, including a helmet, eye protection, gloves, and protective clothing, when operating the motorcycle. Ensure all components are securely fastened and in good working order before each ride.
- Always wear a DOT-approved helmet.
- Perform pre-ride inspections.
- Nepracujte pod vlivem alkoholu nebo drog.
- Dodržujte všechny dopravní předpisy a rychlostní limity.
- This motorcycle is for street use only; not for highway use.
Nastavení a montáž
The X-PRO 125cc motorcycle requires some assembly upon arrival. Follow these steps carefully. It is recommended to have two people for certain steps.
Uncrating the Motorcycle
Carefully cut the straps and remove the cardboard packaging from the metal frame. Once the cardboard is removed, unbolt the metal frame pieces to free the motorcycle. Be cautious as the motorcycle may shift once the frame is disassembled.
Image: The X-PRO 125cc motorcycle securely packaged within its metal frame and cardboard shipping crate.
Instalace zadního kola
The rear wheel is typically shipped detached. Carefully align the wheel with the rear swingarm and insert the axle. Ensure the brake caliper aligns correctly with the disc. Secure the axle nut tightly using appropriate tools.
Obrázek: Zadní view of the X-PRO 125cc motorcycle, showcasing the rear wheel and disc brake assembly.
Front Wheel and Fender Installation
Attach the front wheel to the forks, ensuring the brake disc slides into the caliper. Secure the axle and then install the front fender over the wheel, fastening it to the fork mounts. Finally, attach the front reflectors to the forks.
Obrázek: Přední strana view of the X-PRO 125cc motorcycle, highlighting the front wheel, fender, and headlight.
Handlebar and Mirror Installation
Mount the handlebars to the triple clamp, ensuring they are centered and tightened securely. Install the rearview mirrors into their designated mounts on the handlebars. Adjust them for optimal rear visibility.
Obrázek: Side profile of the X-PRO 125cc motorcycle, showing the handlebars and overall design.
Videonávod k montáži
For a visual guide on the assembly process, please refer to the official X-PRO assembly video below:
Video: Official X-PRO 125cc motorcycle assembly video, demonstrating the uncrating, wheel, fender, and mirror installation steps.
Návod k obsluze
Kontrolní seznam před jízdou
- Check tire pressure (12-inch wheels).
- Verify brake functionality (front and rear disc brakes).
- Inspect chain tension and lubrication.
- Ujistěte se, že všechna světla (světlomety, zadní světla, směrová světla) fungují.
- Check fuel level (gasoline).
- Confirm mirrors are properly adjusted.
Startování motoru
- Otočte palivový ventil do polohy „ON“.
- Vložte klíč do zapalování a otočte jím do polohy „ON“.
- If cold, pull the choke lever (if equipped).
- Press the electric start button or use the kick-start lever.
- Once started, allow the engine to warm up for a few moments.
- Push the choke lever back to the "OFF" position once the engine is running smoothly.
Riding the Motorcycle
Familiarize yourself with the controls before riding. The motorcycle features a twist-grip gear shifter. Engage the clutch, select first gear, and slowly release the clutch while applying throttle to move forward. Practice braking and turning in a safe, open area before riding on public roads.
Údržba
Regular maintenance is crucial for the performance and safety of your X-PRO 125cc motorcycle.
- Výměna oleje: Change engine oil regularly as per the maintenance schedule (refer to a more detailed service manual if available).
- Údržba řetězu: Keep the drive chain clean, lubricated, and properly tensioned.
- Kontrola brzd: Periodically check brake pads for wear and brake fluid levels.
- Péče o pneumatiky: Maintain correct tire pressure and inspect tires for wear or damage.
- Kontroly spojovacích prvků: Regularly check and tighten all nuts and bolts, especially after initial rides.
Odstraňování problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat, a jejich možnými řešeními.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor nenastartuje | No fuel, fuel valve off, dead battery, spark plug issue. | Check fuel level, turn fuel valve on, charge/replace battery, inspect spark plug. |
| Špatný brzdný výkon | Worn brake pads, low brake fluid, air in brake lines. | Inspect/replace pads, top up fluid, bleed brake lines (professional recommended). |
| Chain noise/slipping | Loose chain, dry chain, worn sprockets. | Adjust chain tension, lubricate chain, inspect sprockets for wear. |
If you encounter issues not listed here or cannot resolve a problem, please contact X-PRO customer support.
Specifikace
Key specifications for the X-PRO 125cc Adult Gas Motorcycle (Model: MC-NN20):
- Typ kola: Motorized Bike
- Věkové rozmezí: Dospělý
- Značka: X-PRO
- Barva: Černá (dle aktuální varianty produktu)
- Velikost kola: 12 palce
- Materiál rámu: Hliník nebo ocel
- Typ odpružení: Zadní, přední
- Speciální funkce: Světlomet
- Zahrnuté komponenty: Motorcycle (some assembly required)
- Styl brzdy: Kotouč (přední a zadní)
- Specifická použití: Ulice
- Název modelu: MC-NN20
- Zdroj napájení: Spalovací motor
- Maximální hmotnost Doporučení: 330 libry
- Minimální výška uživatele: 30 palce
- Požadovaná montáž: Ano
Záruka a podpora
Your X-PRO 125cc motorcycle comes with a Záruka 1 měsíců. For any warranty claims, technical support, or parts inquiries, please contact X-PRO customer service directly.
You can visit the official X-PRO store for more information and support: X-PRO Store on Amazon.
