Uživatelská příručka k dronu SwellPro FD3 Fisherman

1. Úvod

This manual provides essential instructions for the safe operation, setup, and maintenance of your SwellPro FD3 Fisherman Waterproof Fishing Drone. The FD3 is designed for marine environments, featuring IP67 waterproofing, a 4K camera, and a dual bait release mechanism for fishing applications. Please read this manual thoroughly before operating the drone to ensure proper use and to prevent damage or injury.

Bezpečnostní pokyny

• Dron vždy provozujte v otevřeném prostoru, mimo dosah lidí, zvířat a překážek.
• Během provozu dodržujte bezpečnou vzdálenost od dronu.
• Do not operate the drone in strong winds, heavy rain, or lightning.
• Před každým letem se ujistěte, že jsou všechny baterie plně nabité.
• Pravidelně kontrolujte dron před a po použití, zda není poškozen.
• Dodržujte všechny místní předpisy a zákony týkající se provozu dronů.

2. Obsah balení

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact SwellPro support.

Obrázek 2.1: The SwellPro FD3 Fisherman drone shown with its primary accessories, including the remote control, flight battery, charger, and bait release mechanism.

• SwellPro FD3 Fisherman Drone (x1)
• Dálkový ovladač (x1)
• Inteligentní letová baterie (x1)
• Nabíječka baterií (x1)
• Propellers (sets)
• Dual Bait Release Mechanism (x1)
• Uživatelská příručka (tento dokument)
• Other accessories (e.g., cables, tools)

3. Nastavení

3.1 Sestavení dronu

1. Připevnění vrtulí: Carefully attach the propellers to the motor shafts. Ensure correct propeller type (CW/CCW) matches the corresponding motor. Tighten securely.
2. Install Flight Battery: Insert the intelligent flight battery into the drone's battery compartment until it clicks into place.
3. Attach Bait Release Mechanism: Secure the dual bait release mechanism to the drone's underside according to the provided diagrams. Ensure it is firmly attached and cables are connected.
4. Instalace fotoaparátu: Mount the 4K camera onto its designated gimbal or mounting point, ensuring all connections are secure.

Obrázek 3.1: Shora dolů view of the SwellPro FD3 drone, illustrating the propeller and motor configuration. Ensure propellers are correctly installed for safe flight.

3.2 Nabíjení baterie

Charge both the intelligent flight battery and the remote controller battery before first use and after each flight.

• Připojte nabíječku k elektrické zásuvce.
• Connect the flight battery to the charger. The indicator light will show charging status.
• Connect the remote controller to its charger (usually via USB).
• Charge until all indicator lights show a full charge.

3.3 Nastavení dálkového ovládání

Obrázek 3.2: The SwellPro FD3 drone positioned next to its remote control, which features a built-in display for real-time flight data and camera feed.

Power on the remote controller. If it does not automatically connect to the drone, follow the binding procedure outlined in the quick start guide or the full manual (if available separately) to establish a connection.

3.4 Instalace aplikace (volitelné)

For advanced features and real-time telemetry, download the official SwellPro app from your device's app store. Follow the in-app instructions to connect your drone and remote controller.

4. Ovládání dronu

4.1 Předletový kontrolní seznam

• Ujistěte se, že všechny baterie (dronu i dálkového ovladače) jsou plně nabité.
• Zkontrolujte vrtule, zda nejsou poškozené, a ujistěte se, že jsou bezpečně upevněny.
• Verify the bait release mechanism and camera are properly installed.
• Check the weather conditions (wind speed, rain).
• Ensure sufficient GPS signal (if operating in GPS mode).
• Clear the flight area of any obstacles, people, or animals.

Obrázek 4.1: The SwellPro FD3 drone in flight over water, demonstrating its waterproof capabilities. Always perform a pre-flight check before launching.

4.2 Základní ovládací prvky letu

Refer to the remote controller diagram (usually found in the quick start guide) for specific stick and button functions. Common controls include:

• Levá páka: Throttle (up/down), Yaw (rotate left/right)
• Pravá páka: Pitch (forward/backward), Roll (left/right)
• Tlačítko Návrat domů (RTH): Zahájí automatický návrat do bodu vzletu.
• Tlačítko pro uvolnění návnady: Activates the bait release mechanism.
• Ovládání fotoaparátu: Buttons for photo capture and video recording.

4.3 Bait Release Operation

1. Securely attach your fishing line with bait to the dual bait release mechanism. Ensure the weight does not exceed the drone's maximum payload capacity (4.4 lbs).
2. Fly the drone to your desired casting location.
3. Once in position, press the dedicated bait release button on the remote controller. The mechanism will open, dropping the bait.
4. Confirm the bait has been released via the camera feed or visual observation.

4.4 4K Camera Operation

• Ensure a compatible microSD card is inserted into the camera.
• Use the dedicated buttons on the remote controller to start/stop video recording or take photos.
• The live video feed will be displayed on the remote controller's screen or connected mobile device.

4.5 Auto Drop & Return

The FD3 features intelligent flight functions:

• Auto Drop: This refers to the automated bait release function, triggered by the remote controller.
• Návrat domů (RTH): When activated, the drone will automatically fly back to its recorded takeoff point and land. This feature is also triggered automatically if the battery level is critically low or if the control signal is lost.

5. Údržba

5.1 Čištění

• After use, especially in saltwater environments, rinse the drone thoroughly with fresh water.
• Wipe the drone dry with a soft cloth. Ensure all ports and connectors are free of moisture before charging or storing.
• Clean the camera lens with a microfiber cloth.

5.2 Skladování

• Store the drone and batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• Pro dlouhodobé skladování vybijte baterie přibližně na 50–60 % kapacity.
• Remove propellers if storing in a compact case.

5.3 Péče o baterii

• Baterie nepřebíjejte ani nevybíjejte.
• Pokud se baterie jeví nafouklá nebo poškozená, okamžitě ji přestaňte používat a řádně ji zlikvidujte.
• Avoid puncturing or exposing batteries to extreme heat.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

For warranty information, please refer to the warranty card included with your product or visit the official SwellPro website. For technical support, troubleshooting assistance, or spare parts, please contact SwellPro customer service.

SwellPro Official Webmísto: www.swellpro.com

Amazon Store: Visit the SwellPRO Store on Amazon