YAOHUIMI A424011101G09

Návod k obsluze náhradního dálkového ovladače YAOHUIMI

For R.W.Flame Electric Fireplace Models

Zavedení

This manual provides comprehensive instructions for the YAOHUIMI Replacement Remote Control, designed to operate various R.W.Flame Electric Fireplace models. This remote control requires no programming and is ready for use after battery installation.

Compatible R.W.Flame Electric Fireplace Models:

  • RFH-6801LC
  • RFH-3001LA, RFH-3001LB
  • RFH-3601LA, RFH-3601LB
  • RFH-2601LC
  • RH-3001LA, RH-3001LB, RH-3001LC
  • RH-3601LA, RH-3601LB, RH-3601LC
  • RFH-4001LA

Please ensure your original remote control matches the appearance of this replacement remote for proper compatibility.

YAOHUIMI Replacement Remote Control for R.W.Flame Electric Fireplace

Obrázek: Přední strana view of the YAOHUIMI replacement remote control, highlighting its ready-to-use nature without programming.

Nastavení: Instalace baterie

The remote control requires two AAA 1.5V batteries (not included). Follow these steps to install the batteries:

  1. Najděte kryt prostoru pro baterie na zadní straně dálkového ovladače.
  2. Posuňte kryt dolů a otevřete přihrádku.
  3. Insert two AAA 1.5V batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Zasuňte kryt přihrádky na baterie zpět na místo, dokud bezpečně nezacvakne.
Battery compartment of the remote control showing AAA 1.5V battery type

Obrázek: Zadní view of the remote control with the battery compartment open, indicating the use of AAA 1.5V batteries.

Poznámka: This remote control is designed for AAA 1.5V batteries, offering a longer lifespan compared to older coin battery designs.

Comparison of new AAA battery design versus old coin battery design for remote controls

Image: Visual comparison illustrating the new design using AAA 1.5V batteries for extended durability versus an older design using coin batteries.

Návod k obsluze

Point the remote control directly at your R.W.Flame Electric Fireplace to ensure proper signal transmission. The remote features several buttons for controlling various functions:

Labeled buttons on the YAOHUIMI replacement remote control

Obrázek: Přední strana view of the remote control with labels indicating the function of each button.

Funkce tlačítek dálkového ovládání
TlačítkoFunkce
ON/OFFPowers the electric fireplace on or off.
+ / - (Triangles)Adjusts settings such as temperature or flame intensity (functionality may vary by fireplace model).
BARVA AControls the flame color settings.
BARVA BControls the flame bed color settings.
TEPLOActivates or deactivates the heater function.
DIMMERAdjusts the brightness of the flame effect.
RYCHLOSTUpravuje rychlost efektu plamene.
ČASOVAČSets or adjusts the fireplace's timer function.

Note: Specific functions and their behavior may vary depending on your R.W.Flame Electric Fireplace model. Refer to your fireplace's manual for detailed information on its features.

Údržba

Výměna baterie

When the remote control's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section, using two fresh AAA 1.5V batteries.

Čištění

To clean the remote control, gently wipe its surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's electronics or finish.

Skladování

Pokud dálkový ovladač nebudete delší dobu používat, doporučuje se vyjmout baterie, aby nedošlo k jejich vytečení a možnému poškození zařízení.

Odstraňování problémů

  • Dálkové ovládání nereaguje:
    • Ensure fresh AAA 1.5V batteries are correctly installed.
    • Verify there are no obstructions between the remote control and the fireplace's receiver.
    • Confirm you are within the effective operating range of the fireplace.
  • Nefunkční specifické funkce:
    • Some functions may be specific to certain R.W.Flame fireplace models. Refer to your fireplace's original manual.
    • Ensure the remote control is compatible with your exact fireplace model. The appearance of this replacement remote should match your original.

Specifikace

FunkceDetail
Číslo modeluA424011101G09 (GAO04)
ZnačkaYAOHUIMI
Compatible Fireplace BrandR.W.Flame
Typ baterie2x AAA 1.5V (nejsou součástí balení)
Hmotnost položky1.06 unce
Rozměry balení0.39 x 0.2 x 0.08 palce
Speciální funkceNení potřeba žádné programování

Záruka a podpora

For warranty information or technical support regarding your YAOHUIMI Replacement Remote Control, please contact the seller or the manufacturer, HUIMIKEJI, directly. Details regarding specific warranty periods and support procedures are typically provided at the point of purchase or on the manufacturer's official webmísto.

Výrobce: HUIMIKEJI

Značka: YAOHUIMI

prodejce: Remotes US (as per Amazon listing)

Documents - YAOHUIMI – A424011101G09

žádné relevantní dokumenty