WdtPro TFL001

Uživatelská příručka k vylepšeným solárním světelům WdtPro 2025

Značka: WdtPro | Model: TFL 001

Multiple WdtPro solar lily lights glowing in various vibrant colors in a dark garden setting.

Figure 0: An array of WdtPro solar lily lights illuminating a garden with their multi-color glow.

Zavedení

Thank you for choosing WdtPro 2025 Upgraded Solar Lily Lights. These innovative solar garden lights feature a unique blooming lily design with 24 vibrant RGB LEDs, offering 7 color-changing modes to enhance your outdoor space. Designed for durability and ease of use, they are waterproof and automatically illuminate at night, providing a beautiful and energy-efficient lighting solution for your garden, patio, or pathway.

Obsah balení

Zkontrolujte prosím, zda jsou v balení přítomny všechny komponenty:

Pokyny pro nastavení

  1. Sestavte Světlo: Attach the stainless steel ground stake to the bottom of the solar light unit. Then, attach the ABS ground spike to the end of the stainless steel ground stake.
  2. Aktivujte přepínač: Locate the ON/OFF switch, usually on the underside of the solar panel. Slide the switch to the "ON" position. The light will not charge or illuminate if the switch is off.
  3. Vyberte umístění: Select an outdoor location where the solar panel can receive direct sunlight for at least 6-8 hours daily. This ensures optimal charging and maximum illumination time at night. Avoid placing them under shade or near other strong light sources, which may prevent them from turning on automatically.
  4. Vložte do země: Gently push the assembled light into the ground. Ensure the solar panel is facing upwards and is unobstructed.
  5. Nastavení představců: The lily stems are flexible. You can gently bend the internal wire to adjust the angle and arrangement of the flowers to your desired aesthetic.
Diagram showing the dimensions of the solar lily light and its components, including the solar panel, stem, and ground stake.

Figure 1: Product dimensions and key features, including the 6-pack quantity, new blooming lily design, and 7 color-changing LED lights.

Two images side-by-side. The top image shows solar lily lights in a garden during the day, labeled 'Auto Charging 6-8 H'. The bottom image shows the same lights glowing in various colors at night, labeled 'Auto Lighting 10-12 H'.

Figure 2: Illustration of automatic charging during the day and automatic illumination at night, highlighting the charging and lighting durations.

Návod k obsluze

Once the solar lights are properly set up and the switch is in the "ON" position, they will operate automatically:

A vibrant display of multiple solar lily lights glowing in various colors in a garden setting at night. A color spectrum bar is shown at the bottom.

Figure 3: The 7 color-changing blooming lily lights bringing vibrant color and a decorative view to a garden.

Three different nighttime scenes showing the solar lily lights illuminating various outdoor areas, including a fence line, a garden bed, and a memorial stone.

Obrázek 4: Přamples of the solar lily lights enhancing different outdoor environments at night.

Údržba

To ensure the longevity and optimal performance of your WdtPro Solar Lily Lights, follow these maintenance guidelines:

Solar lily lights in a garden during a light rain, with icons indicating water resistance, snowproof, heat resistant, and windproof.

Figure 5: The IP65 all-weather ready design of the solar lily lights, demonstrating their resistance to water, snow, heat, and wind.

Odstraňování problémů

ProblémMožná příčinaŘešení
Světlo se v noci nerozsvítí.
  • Přepínač je v poloze „VYPNUTO“.
  • Nedostatek slunečního světla pro nabíjení.
  • Solární panel je znečištěný nebo ucpaný.
  • Light sensor is detecting ambient light.
  • Ujistěte se, že je přepínač nastaven na „ON“.
  • Relocate the light to an area with direct sunlight for 6-8 hours daily.
  • Vyčistěte povrch solárního panelu.
  • Move the light away from streetlights, porch lights, or other strong light sources.
Light illuminates for a short period only.
  • Baterie není plně nabitá.
  • Battery capacity reduced over time.
  • Ensure the light receives full direct sunlight for the entire day.
  • Consider replacing the rechargeable battery if it's old and performance has significantly degraded.
Lights appear dim.
  • Nedostatečný náboj.
  • Špinavý solární panel.
  • Follow steps for "Light illuminates for a short period only".
  • Vyčistěte povrch solárního panelu.

Specifikace

ZnačkaWdtPro
Název modeluTFL 001
Počet položek6 balení
Typ světelného zdrojeLED
Počet světelných zdrojů24 za světlo
Světlá barva7 Color Changing (RGB)
Zdroj napájeníSolární napájení
Baterie600mAh NiMH Rechargeable (Built-in)
Doba nabíjení4-6 hodin (přímé sluneční světlo)
Doba osvětleníAž 12 hodin (při plném nabití)
VoděodolnostIP65 Vodotěsný
MateriályAcrylonitrile Butadiene Styrene (ABS), Silk, Stainless Steel
Materiál stínidlaHedvábí
Barva stínuPurple, Rose Red, White
Rozměry produktu13.97 x 3.74 x 4.92 palce (přibližně, sestaveno)
Hmotnost položky1.85 liber (celkem za balení 6 kusů)
Vnitřní/venkovní použitíVenkovní

Záruka a podpora

WdtPro is committed to providing high-quality products. For any questions, concerns, or technical support regarding your solar lily lights, please contact WdtPro customer service. Refer to the product packaging or the retailer's webPodrobnosti o záruce a kontaktní informace naleznete na webových stránkách.

Doporučujeme si uschovat doklad o koupi jako doklad o koupi pro případ reklamace.

Související dokumenty - TFL 001

Předview Difuzér WdtPro S3000: Příslušenství k baterce pro 3D tisk
Stáhněte si difuzér WdtPro S3000, 3D tisknutelné příslušenství pro svítilnu WdtPro. Navrženo společností MarAlMe a dostupné na Printables. Kompatibilní s tiskárnami Prusa MK3/S/S+. Vyrobeno z PETG filamentu.