Speco H4FD1M 4MP dome kamera: Instalační a provozní manuál

1. Úvod

This manual provides detailed instructions for the installation, setup, and operation of the Speco H4FD1M 4MP HD-TVI Dome Camera. Please read this manual thoroughly before attempting to install or operate the device to ensure proper functionality and to prevent damage.

2. Konec produktuview

2.1 Klíčové vlastnosti

• 4MP HD-TVI Resolution: Captures high-definition video at 4 megapixels.
• Flexible Intensifier Technology: Enhances low-light performance for clear images in various lighting conditions.
• 2.7-12mm Motorized Focus Lens: Umožňuje dálkové nastavení zoomu a ostření.
• Adaptive IR LEDs: Provides infrared illumination for night vision up to 98 feet (30 meters).
• Integrated Junction Box: Facilitates clean and secure cable management.
• Durable Dome Form Factor: Suitable for indoor surveillance applications.

2.2 Obsah balení

• Speco H4FD1M 4MP Dome Camera
• Integrovaná spojovací skříňka
• Montážní materiál (šrouby, hmoždinky)
• Šablona instalace
• Rychlý průvodce (tento návod)

Figure 1: Speco H4FD1M 4MP Dome Camera with its integrated junction box. The camera features a dark gray housing with the 'speco technologies' logo, a clear dome covering the lens, and infrared LEDs. The separate junction box is also dark gray with screw access points.

3. Nastavení a instalace

3.1 Kontrolní seznam před instalací

• Ensure you have all package contents.
• Prepare necessary tools: drill, screwdriver, cable cutters, network cable tester (if applicable).
• Identify a suitable mounting location (ceiling or wall) that provides the desired field of view a je v dosahu napájecích a video kabelů.
• Verify power supply compatibility (refer to specifications).

3.2 Montáž fotoaparátu

1. Připravte montážní povrch: Use the provided installation template to mark drill holes for the junction box on the desired ceiling or wall surface.
2. Install the Junction Box: Drill the marked holes, insert wall anchors if necessary, and secure the junction box to the surface using the provided screws. Ensure the box is firmly attached.
3. Vedení kabelů: Route the necessary power and video cables through the designated openings in the junction box.
4. Připojte kameru: Connect the camera to the junction box. Secure the camera body to the junction box using the appropriate screws. Ensure the camera is oriented correctly.
5. Upravit úhel kamery: Loosen the adjustment screws on the camera's gimbal to position the lens for the desired viewing angle. Tighten the screws once the position is set.

3.3 Zapojení kabeláže

• Připojení videa: Connect the HD-TVI video output from the camera to a compatible HD-TVI DVR/NVR using a coaxial cable.
• Připojení napájení: Connect the camera to a suitable power supply (e.g., 12V DC) using the power input cable. Ensure the power supply meets the camera's requirements.
• Network Connection (Optional/If Applicable): While the primary video is HD-TVI (wired coaxial), some features or configuration might utilize a network connection. If a network port is present, connect it to your network infrastructure using an Ethernet cable.

4. Návod k obsluze

4.1 Počáteční zapnutí

Once all connections are secure, apply power to the camera. The camera will perform a self-test, and the IR LEDs may briefly illuminate.

4.2 Accessing Video Feed

Access the live video feed through your connected HD-TVI DVR/NVR. Refer to your DVR/NVR's manual for specific instructions on viewing camera channels.

4.3 Adjusting Motorized Lens

The H4FD1M features a motorized 2.7-12mm lens with autofocus. This allows for remote adjustment of the camera's zoom and focus. These adjustments are typically made through the OSD (On-Screen Display) menu accessible via the DVR/NVR's coaxial control (UTC - Up The Coax) function. Consult your DVR/NVR manual for details on accessing and controlling the OSD menu.

• Lupa: Use the OSD controls to zoom in or out to achieve the desired field of view.
• Soustředit: After adjusting the zoom, use the autofocus function or manually fine-tune the focus via the OSD to ensure a sharp image.

4.4 Navigace v nabídce OSD

The OSD menu provides access to various camera settings, including image adjustments (brightness, contrast, saturation), white balance, day/night mode, and other advanced features. Navigate the OSD menu using the coaxial control functions of your DVR/NVR.

5. Údržba

5.1 Čištění fotoaparátu

• Pravidelně čistěte kryt kopule kamery měkkým hadříkemamp cloth to remove dust, dirt, or smudges that may affect image quality.
• Do not use harsh chemicals or abrasive cleaners, as these can damage the dome material.

5.2 aktualizací firmwaru

Periodically check the Speco Technologies website for available firmware updates for your H4FD1M camera. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

6. Řešení problémů

7. Technické specifikace

8. Záruka a podpora

8.1 Záruka na produkt

Speco Technologies products are designed for reliability and performance. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Speco Technologies webnebo kontaktujte jejich zákaznický servis.

8.2 Technická podpora

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Speco Technologies customer support. You can find contact information and additional resources on the official Speco Technologies webmísto: www.specotech.com.