Moen Faucet Lavatory 2H CS MAT BLK 84311BL Uživatelská příručka

Zavedení

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Moen Faucet Lavatory 2H CS MAT BLK 84311BL. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Konec produktuview

The Moen Faucet Lavatory 2H CS MAT BLK 84311BL is a two-handle centerset lavatory faucet designed for bathroom sinks. It features a matte black finish and lever handles, providing both aesthetic appeal and functional control. This faucet is designed for deck-mount installation and includes a pop-up drain.

Obrázek: Přední strana view of the Moen Faucet Lavatory 2H CS MAT BLK 84311BL, showcasing its matte black finish and two lever handles.

Klíčové vlastnosti:

• Model: 84311BL
• Dokončit: Matná černá
• Rukojeti: Two lever handles
• Typ montáže: Mount Deck
• Zahrnuté komponenty: Faucet, Pop Up Drain
• Rozměry: Přibližně 8.25 cm H x 8.5 cm Š x 12 cm V

Image: Diagram showing the dimensions of the Moen Faucet Lavatory 2H CS MAT BLK 84311BL, indicating height, width, and depth.

Než začnete

Potřebné nástroje a materiály:

• Nastavitelný klíč
• Basin wrench (optional, but recommended)
• Křížový šroubovák
• Instalatérský tmel nebo silikonový tmel
• Teflonová páska
• Ochranné brýle
• Kbelík a ručníky

Kontrolní seznam před instalací:

1. Ověřte, zda jsou všechny díly přítomny dle dodacího listu.
2. Ensure your sink has a three-hole configuration for proper installation.
3. Vypněte hlavní přívod vody do koupelny.
4. Pro snadný přístup uvolněte prostor pod dřezem.

Image: Diagram illustrating a sink with a three-hole configuration, suitable for this faucet model.

Nastavení a instalace

Follow these steps carefully for a successful installation.

1. Demontáž starého kohoutku (pokud je to relevantní):
   • Vypněte přívod vody.
   • Disconnect water supply lines from the old faucet.
   • Unscrew mounting nuts and remove the old faucet.
   • Důkladně očistěte povrch dřezu.
2. Instalace nového kohoutku:
   • Apply a thin bead of plumber's putty or silicone sealant around the base of the new faucet.
   • Insert the faucet body and handles into the holes on the sink deck.
   • From underneath the sink, secure the faucet with the provided washers and mounting nuts. Tighten firmly but do not overtighten.
3. Připojení přívodních vodovodních potrubí:
   • Wrap Teflon tape around the threaded ends of the water supply valves.
   • Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use an adjustable wrench to tighten connections, ensuring they are snug but not overtightened.
4. Instalace vyskakovacího odtoku:
   • Follow the specific instructions provided with the pop-up drain assembly. Typically, this involves applying sealant to the drain flange, inserting it into the sink drain hole, and securing it from underneath with a washer and nut.
   • Connect the pivot rod to the pop-up stopper and the lift rod.
5. Zkouška těsnosti:
   • Pomalu zapněte hlavní přívod vody.
   • Check all connections for leaks. If leaks are present, tighten the connections slightly until they stop.
   • Run water through the faucet for a few minutes to flush out any debris.

Image: The Moen Faucet Lavatory 2H CS MAT BLK 84311BL installed on a bathroom sink, showing its integration with the countertop.

Návod k obsluze

The Moen Faucet Lavatory 2H CS MAT BLK 84311BL features two lever handles for controlling water flow and temperature.

• Studená voda: The right lever handle controls the cold water supply. Turn the handle counter-clockwise to increase cold water flow.
• Horká voda: The left lever handle controls the hot water supply. Turn the handle counter-clockwise to increase hot water flow.
• Ovládání teploty: Adjust the temperature by mixing hot and cold water using both handles simultaneously.
• Průtok vody: The further you turn the handles, the greater the water flow.

Image: The Moen Faucet Lavatory 2H CS MAT BLK 84311BL with water flowing from the spout, demonstrating its operational state.

Údržba a péče

Proper care will ensure the lasting beauty and performance of your Moen faucet.

• Čištění: Clean the faucet regularly with a soft cloth and mild soap. Rinse thoroughly with warm water and dry with a soft cloth.
• Vyhněte se drsným čisticím prostředkům: Do not use abrasive cleaners, harsh chemicals, or polishes containing alcohol, ammonia, bleach, or abrasive agents, as these can damage the finish.
• Údržba provzdušňovače: Pokud se průtok vody sníží, může být perlátor ucpaný. Odšroubujte perlátor z hubice, očistěte všechny nečistoty a před opětovným nasazením jej důkladně opláchněte.
• Prevence úniku: Periodically check all connections for tightness to prevent leaks.

Odstraňování problémů

Běžné problémy a jejich řešení naleznete v tabulce níže.

Specifikace

Záruka a podpora

Moen products are manufactured under the highest standards of quality and workmanship. This product is backed by Moen's comprehensive warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Moen webmísto.

For technical assistance, replacement parts, or warranty claims, please contact Moen Customer Service:

• Moen Official Webmísto: www.moen.com
• Telefon zákaznického servisu: Viz Moenův webmísto pro regionální kontaktní čísla.

When contacting support, please have your model number (84311BL) and purchase date available.