Uživatelská příručka k detektoru oxidu uhelnatého CPVAN 3 v 1

Zavedení

This user manual provides essential information for the proper installation, operation, and maintenance of your CPVAN 3-in-1 Carbon Monoxide Detector. This device is designed to detect carbon monoxide (CO) gas, and also displays ambient temperature and humidity. It features a 10-year electrochemical sensor and is powered by a 4-year replaceable battery, certified to EU standard EN50291. Please read this manual thoroughly before using the product to ensure safe and effective operation.

Obrázek 1: Přední view of the CPVAN 3-in-1 Carbon Monoxide Detector, showing the display and indicator light.

Bezpečnostní informace

Důležité: This device is a carbon monoxide (CO) detector, not a smoke detector or a carbon dioxide (CO2) detector. It is designed to detect carbon monoxide gas from sources such as faulty combustion appliances.

• Do not paint the detector. Paint may clog the openings and interfere with the sensor's ability to detect CO.
• Do not block the ventilation openings on the detector.
• Pravidelně testujte detektor podle pokynů v této příručce.
• Do not install the detector in areas with high humidity, extreme temperatures, or excessive dust.
• In case of an alarm, evacuate the premises immediately and call emergency services. Do not re-enter until the area has been declared safe.
• The device cannot replace a smoke or gas alarm.

Obsah balení

Po otevření zkontrolujte obsah balení, abyste se ujistili, že jsou všechny položky přítomny a nepoškozené.

• 1 × CPVAN Carbon Monoxide Detector (Model: COS-X3 plus)
• 2 × 1.5V AA Alkaline Batteries
• 2 × Hmoždinky
• 2 × šrouby
• 1 × Uživatelská příručka

Konec produktuview

The CPVAN 3-in-1 Carbon Monoxide Detector integrates CO detection with temperature and humidity monitoring.

Obrázek 2: The detector's display indicates Carbon Monoxide (CO) levels, relative humidity (%RH), and temperature (°C). When CO concentration is below 25 ppm, only temperature and humidity are displayed.

Klíčové komponenty:

• LCD displej: Shows CO concentration (PPM), relative humidity (%RH), and temperature (°C).
• Tlačítko Test/Reset: Used to test the alarm function and reset the device.
• Kontrolka: Displays device status (Green for normal, Yellow for fault, Red for alarm).
• Alarm bzučák: Emits a loud sound during a CO alarm.
• Přihrádka na baterie: Nachází se na zadní straně pro baterie AA.

Obrázek 3: Visual representation of the indicator light states: Green for normal operation, Yellow for fault, and Red for CO alarm.

Nastavení

1. Instalace baterie

The detector requires two 1.5V AA alkaline batteries (included).

1. Otevřete kryt přihrádky na baterie na zadní straně detektoru.
2. Remove the plastic insulating strip from the pre-installed batteries.
3. Insert the two AA batteries, ensuring correct polarity (+ and -).
4. Close the battery compartment cover securely. The device will automatically power on.

Obrázek 4: Illustration of the battery compartment on the back of the detector, showing where to insert the two AA alkaline batteries.

2. Montáž a umístění

Proper placement is crucial for effective CO detection. Install the detector in locations where CO may be produced. The closer it is to a potential CO source, the sooner the alarm will activate.

• Doporučená místa: Near combustion appliances (furnaces, water heaters, fireplaces), in living areas, and bedrooms.
• Vyhněte se: Directly above heat sources, in direct sunlight, near windows or vents, in dusty or humid areas, or behind curtains/furniture that could obstruct the sensor.
• Výška instalace: For optimal detection, install the detector at a height between your waist and head level, or as per local regulations.

1. Choose a suitable wall location.
2. Mark the positions for the two screws using the detector's mounting holes as a guide.
3. Drill two holes and insert the wall plugs.
4. Insert the screws, leaving a small gap from the wall.
5. Align the detector's mounting slots with the screws and slide it down to secure it.

Obrázek 5: The detector can be easily mounted on a wall using the provided screws and wall plugs.

Obrázek 6: Example of optimal placement for CO detectors (red squares), heat alarms (green triangles), and smoke alarms (blue circles) within a typical home layout.

Operace

1. Počáteční zapnutí

After battery installation, the device will perform a self-test. The display will show a brief sequence, and the green indicator light will flash. Once initialized, it will display temperature and humidity. The green light will flash approximately every 60 seconds in standby mode.

2. Zobrazení informací

LCD displej poskytuje informace v reálném čase:

• Teplota: Zobrazeno ve stupních Celsia (°C).
• Vlhkost: Shown as relative humidity (%RH).
• Koncentrace CO: Displayed in parts per million (PPM). If CO concentration is below 25 ppm, only temperature and humidity are shown. CO concentration is updated every 4 seconds.

Obrázek 7: The real-time display shows current humidity and temperature. CO concentration is displayed when it exceeds 25 PPM, with different alarm cycles based on CO levels.

3. Testování alarmu

It is recommended to test the detector weekly to ensure proper function.

• Press and hold the Test/Reset button on the front of the detector.
• The alarm will sound loudly, and the red indicator light will flash. The display will show a high CO reading (e.g., "MAX 58 PPM CO").
• Uvolněte tlačítko pro zastavení testu.

Alternatively, you can test by holding the detector near burning materials like paper or cigarettes for 5-10 seconds. Incomplete combustion typically produces carbon monoxide. If the detector functions correctly, it will display CO concentration and sound an audible alarm.

Obrázek 8: When CO is detected above the alarm threshold, the red light flashes and the alarm sounds.

4. Alarm Conditions and Behavior

The detector is certified to EN-50291 standards. Alarm thresholds are as follows:

When an alarm occurs, the red indicator light will flash rapidly, and the buzzer will emit a loud, continuous alarm sound. The display will show the detected CO concentration.

What to do if the alarm sounds:

1. Okamžitě se přesuňte na čerstvý vzduch ven nebo otevřete všechny dveře a okna, abyste prostor vyvětrali.
2. Proveďte spočítání osob, abyste se ujistili, že jsou všechny osoby započítány.
3. Nevstupujte do prostor, dokud neustane alarm a prostor nebude důkladně vyvětrán.
4. Call your emergency services or a qualified technician to investigate the source of the CO.

Údržba

1. Výměna baterie

The detector is designed with a 4-year replaceable battery life. When the batteries are low, the device will indicate this with a specific warning (e.g., a chirp or a low battery icon on the display). Replace both AA alkaline batteries promptly when this occurs. Refer to the "Battery Installation" section for replacement steps.

2. Čištění

Clean the detector regularly to prevent dust buildup from affecting its performance.

• Použijte měkký, damp hadřík k otření vnější strany detektoru.
• Do not use cleaning sprays, solvents, or abrasive cleaners.
• Detektor nelakujte.

3. Pravidelné testování

Test the detector weekly using the Test/Reset button to ensure the alarm and sensor are functioning correctly.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information and customer support, please refer to the documentation provided with your purchase or contact CPVAN customer service directly.

Manufacturer: SafeBay
Contact information may be available on the product packaging or the official CPVAN webmísto.

Oficiální videa produktů

No official product videos with "Seller" as creator type were found in the provided data.