1. Úvod
This manual provides detailed instructions for the ID-COOLING FROZN A410 ARGB White CPU Cooler. This high-performance air cooler is designed to provide efficient heat dissipation for your CPU, featuring 4 copper heat pipes, a 120mm Fluid Dynamic Bearing (FDB) fan, and vibrant Addressable RGB (ARGB) lighting. It offers excellent compatibility with various RAM modules due to its single tower design.
Klíčové vlastnosti:
- Efektivní odvod tepla: Equipped with 4 heat pipes and a 120mm FDB fan for optimal CPU cooling.
- Živé ARGB osvětlení: Integrated ARGB lighting on the top cover and fan for customizable visual effects.
- RAM Compatibility: Single tower design ensures perfect compatibility with various RAM configurations.
- Ventilátor s fluidním dynamickým ložiskem: Provides longer lifespan, quieter operation, reduced vibration, and improved efficiency.
1 video: Introducing the ID-COOLING FROZN A410 ARGB White CPU Cooler. This video provides a visual overview of the cooler's design and ARGB lighting effects within a PC build.
2. Nastavení a instalace
Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket details. The ID-COOLING FROZN A410 ARGB White CPU Cooler supports Intel LGA1700/1851/1200/115X and AMD AM4/AM5 sockets.
2 video: Detailed installation guide for FROZN Single Tower Series coolers on various Intel and AMD platforms. This video demonstrates the step-by-step process for mounting the cooler.
2.1. Zahrnuté komponenty
Verify all components are present before installation:
- Heatsink with 4 heat pipes
- 120mm ventilátor ARGB
- Intel Backplate (for LGA1700/1200/115X)
- Intel Brackets
- AMD Brackets
- Montážní šrouby a matice
- Rubber Spacers (Black for Intel LGA1700, Grey for Intel LGA1200/115X, Red for AMD)
- Tepelné mazivo
Obrázek 1: Nadview of the mounting hardware included with the FROZN A410 ARGB White CPU Cooler, showing components for both Intel and AMD platforms.
2.2. Intel LGA1700/1851/1200/115X Installation
- Příprava zadní desky: For LGA1700, move the screws of the Intel Backplate to the outermost position. For LGA1200/115X, move them to the innermost position. Install the backplate on the back of the motherboard.
- Instalace distančních podložek: Place the appropriate rubber spacers (Black for LGA1700, Grey for LGA1200/115X) onto the backplate screws protruding through the motherboard.
- Bezpečné držáky: Place the Intel mounting brackets on top of the spacers, aligning them with the CPU socket. Secure with the tightening nuts.
- Naneste termální pastu: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU.
- Montáž chladiče: Remove the protective sticker from the heatsink base. Carefully place the heatsink onto the CPU, aligning the mounting holes with the bracket screws. Tighten the screws in a diagonal pattern until secure.
- Připojení ventilátoru: Use the provided fan clips to secure the 120mm ARGB fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of the case.
- Připojit kabely: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.
2.3. Instalace AMD AM4/AM5
Poznámka: The original backplate of your AMD motherboard is required for installation.
- Remove Stock Retention: Remove the plastic retention module from the motherboard, but keep the stock metal backplate.
- Instalace distančních podložek: Place the red AMD standoffs onto the backplate screws.
- Bezpečné držáky: Place the AMD mounting brackets on top of the standoffs, aligning them with the CPU socket. Secure with the tightening screws.
- Naneste termální pastu: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU.
- Montáž chladiče: Remove the protective sticker from the heatsink base. Carefully place the heatsink onto the CPU, aligning the mounting holes with the bracket screws. Tighten the screws in a diagonal pattern until secure.
- Připojení ventilátoru: Use the provided fan clips to secure the 120mm ARGB fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of the case.
- Připojit kabely: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.
3. Provoz
The ID-COOLING FROZN A410 ARGB White CPU Cooler is designed for optimal performance and aesthetics.
3.1. Fan Control (PWM)
The 120mm FDB fan is a Pulse Width Modulation (PWM) fan, allowing your motherboard to dynamically control its speed based on CPU temperature. This ensures efficient cooling when needed and quiet operation during lighter loads. You can configure fan curves through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.
Obrázek 2: Diagram illustrating the Fluid Dynamic Bearing (FDB) technology used in the fan, highlighting its benefits for longevity and quiet operation.
Obrázek 3: Visual representation of the fan's performance metrics, including airflow (78 CFM), noise level (29.9 dB(A) Max), and air pressure (2.68mmH2O Max).
3.2. Ovládání osvětlení ARGB
The Addressable RGB (ARGB) lighting on the fan and top cover can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller (if connected). Ensure the ARGB cable is properly connected to a 3-pin 5V ARGB header.
Obrázek 4: The FROZN A410 ARGB White CPU Cooler showcasing its vibrant ARGB lighting when installed in a white PC case.
4. Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost chladiče procesoru.
- Čištění prachu: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is not spinning during cleaning to prevent damage.
- Teplovodní pasta: Reapply thermal paste every 1-2 years, or if the cooler is removed and reinstalled. Ensure the CPU and heatsink surfaces are clean before applying new thermal paste.
- Kontrola ventilátoru: Check fan cables for secure connections and ensure fan blades are free from obstructions.
5. Řešení problémů
Pokud narazíte na problémy s chladičem procesoru, podívejte se na následující běžná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Přehřátí procesoru | Improper thermal paste application, loose heatsink, insufficient airflow, dust buildup. | Reapply thermal paste, ensure heatsink is securely mounted, clean heatsink and fan, check case airflow. |
| Ventilátor se netočí | Fan cable disconnected, faulty fan header, fan failure. | Check 4-pin PWM connection to CPU_FAN header, try a different fan header, replace fan if faulty. |
| ARGB osvětlení nefunguje | ARGB cable disconnected, incompatible ARGB header (e.g., 4-pin 12V instead of 3-pin 5V), software issue. | Check 3-pin 5V ARGB connection, ensure correct header type, update/reinstall motherboard ARGB software. |
| Nadměrný hluk ventilátoru | Fan speed too high, dust buildup, faulty fan bearing. | Adjust fan curve in BIOS/UEFI, clean fan, replace fan if bearing is faulty. |
6. Specifikace
| Funkce | Detail |
|---|---|
| Rozměry produktu | 4.72"L x 0.98"W x 4.72"H (Fan only) |
| Cooler Height | 152 mm (6 palce) |
| Způsob chlazení | Vzduch |
| Tepelné trubky | 4 x Φ6mm Copper Heat Pipes |
| Rozměry ventilátoru | 120 x 120 x 25 mm |
| Typ ložiska ventilátoru | Fluidní dynamické ložisko (FDB) |
| Maximální rychlost otáčení | 2000 ot./min |
| Proud vzduchu | 78 kubických stop za minutu (CFM) |
| Úroveň hluku | 29.9 decibelů (max.) |
| Typ napájecího konektoru | 4-Pin PWM |
| svtage | 12 voltů |
| Wattage | 5.64 wattů |
| TDP (Tepelný návrhový výkon) | 220W |
| Kompatibilní zařízení | Desktop CPUs |
| Supported Sockets | Intel LGA1700/1851/1200/115X; AMD AM4/AM5 |
| Materiál | Copper, Metal/Aluminum, Plastic/Rubber, Resin |
| Hmotnost položky | 2.33 libry |
| Co je v krabici | Heatsink, Cooling Fan, Mounting Hardware, Thermal Grease |
Obrázek 5: Illustration of the 4 direct contact heatpipes, showing how they efficiently transfer heat from the CPU.
Obrázek 6: Diagram highlighting the cooler's design for perfect memory compatibility, ensuring clearance for RAM modules.
Obrázek 7: The ID-COOLING FROZN A410 ARGB White CPU Cooler, emphasizing its aesthetic appeal.
7. Záruka a podpora
For warranty information and technical support, please refer to the official ID-COOLING webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.
Online zdroje: ID-COOLING Store on Amazon
