Inkbird ITC-C216T Thermostat Instruction Manual

Zavedení

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

Bezpečnostní informace

Ensure the thermostat is connected to a grounded power outlet.
Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
Keep the device away from water, except for the IP67 rated probe.
Nepokoušejte se jednotku rozebírat ani opravovat sami. V případě problémů kontaktujte zákaznickou podporu.
Před čištěním nebo prováděním údržby zařízení vždy odpojte ze sítě.

Konec produktuview

Komponenty

Detailed diagram of the Inkbird ITC-C216T thermostat, labeling its components: LCD, operational buttons, output, temperature probe, input, heating icon, cooling icon, timing icon, child lock, start temperature/time, and stop temperature/time.

Obraz: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

LCD with White Backlight: Displays current and set temperatures/times.
Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
výstup: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
Teplotní sonda: 2m/79in long, IP67 waterproof for accurate temperature detection.
Vstup: 100~240Vac 50/60Hz max 10A.
Ikona topení: Indicates heating operation.
Cooling Icon: Indicates cooling operation.
Timing Icon: Indicates timing function is active.
Ikona dětského zámku: Indikuje, že je zapnutý dětský zámek.
START: Displays start temperature or time.
ZASTÁVKA: Displays stop temperature or time.

Klíčové vlastnosti

Hand holding the Inkbird ITC-C216T thermostat, highlighting its backlit display, child lock, temperature calibration, memory function, and high/low temperature alarm features.

Obraz: The Inkbird ITC-C216T thermostat showcasinjeho hlavní rysy.

Podsvícený LCD displej: Easy to read current and set values, even in low light.
Three Control Modes: Temperature, Cycle Time, and Countdown.
Široký teplotní rozsah: Reguluje teploty od -40 °C do 100 °C.
Alarmy vysoké/nízké teploty: Customizable alarm values with an option to mute the buzzer.
Kalibrace teploty: Allows for fine-tuning temperature readings.
Cooling Delay: Protects cooling equipment from short cycling.
Dětský zámek: Zabraňuje nechtěným změnám nastavení.
Funkce paměti: Retains all settings after a power interruption.
Vodotěsná sonda IP67: Suitable for use in soil or submerged in water.

Nastavení

Rozbalit: Carefully remove the thermostat and its components from the packaging.
Připojit: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
Připojit zařízení: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
Polohová sonda: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

Provozní režimy

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Temperature Mode

Diagram illustrating the Inkbird ITC-C216T thermostat's cooling and heating capabilities, with temperature ranges from -40°C to 100°C.

Obraz: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

Stiskněte tlačítko MODE button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
Stiskněte SOUBOR to enter setting mode. The START temperature will flash. Use the UP a DOLŮ buttons to adjust the desired START temperature.
Stiskněte SOUBOR again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP a DOLŮ.
Stiskněte SOUBOR one more time to save the settings and exit.
If START temperature is lower than STOP temperature, the thermostat operates in režim vytápění.
If START temperature is higher than STOP temperature, the thermostat operates in režim chlazení.

2. Cycle Time Mode (P01)

Illustration of the Inkbird ITC-C216T thermostat's Cycle Time Mode (P01) setting, showing a device turning on and off at set intervals.

Obraz: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

Stiskněte MODE until P01 is displayed.
Stiskněte SOUBOR. The ON time will flash. Adjust using UP/DOLŮ.
Stiskněte SOUBOR. The OFF time will flash. Adjust using UP/DOLŮ.
Stiskněte SOUBOR to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

P02: Countdown ON
Obraz: Diagram explaining the Countdown ON Mode (P02).
The device will turn ON after the set countdown period.
P03: Countdown OFF
Obraz: Diagram explaining the Countdown OFF Mode (P03).
The device will turn OFF after the set countdown period.
P04: Countdown ON & OFF
Obraz: Diagram explaining the Countdown ON&OFF Mode (P04).
The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

Stiskněte MODE until P02, P03, or P04 is displayed.
Stiskněte SOUBOR. The countdown time(s) will flash. Adjust using UP/DOLŮ.
Stiskněte SOUBOR uložit a ukončit.

Pokročilá nastavení

Kalibrace teploty (CA)

Image showing the Inkbird ITC-C216T thermostat displaying 'CA' for temperature calibration, with a gecko in the background.

Obraz: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

Když je zařízení zapnuté, stiskněte a podržte tlačítko SOUBOR button for approximately 3 seconds to enter the parameter settings.
Použijte UP/DOLŮ buttons to navigate to the 'CA' (Calibration) setting.
Stiskněte SOUBOR, poté použijte UP/DOLŮ to adjust the calibration value (e.g., +0.5°C or -0.5°C).
Stiskněte SOUBOR pro potvrzení a ukončení.

Cooling Delay (Pt)

Image showing the Inkbird ITC-C216T thermostat displaying 'Pt' for refrigeration delay, with a refrigerator in the background.

Obraz: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

Enter parameter settings (press and hold SOUBOR po dobu 3 sekund).
Navigate to 'Pt' (Cooling Delay).
Adjust the delay time in minutes using UP/DOLŮ.
Stiskněte SOUBOR pro potvrzení a ukončení.

High/Low Temperature Alarms (AH/AL)

Image showing the Inkbird ITC-C216T thermostat displaying 'AH' for high temperature alarm, with a mute icon, next to a lizard.

Obraz: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

Enter parameter settings.
Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
Adjust the alarm temperature using UP/DOLŮ.
Stiskněte SOUBOR potvrdit.
To mute the buzzer, press any button when the alarm sounds.

Dětský zámek

Image showing the Inkbird ITC-C216T thermostat with a child lock icon displayed, indicating the safety feature is active.

Obraz: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

Stiskněte a podržte UP a DOLŮ buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
Repeat the action to unlock the device.

Funkce paměti a tovární reset

Funkce paměti: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
Obnovení továrního nastavení: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

Aplikace

Collage of images showing various applications for the Inkbird ITC-C216T thermostat, including reptile terrariums, fish tanks, home appliances, refrigeration, home brewing, and incubation.

Obraz: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

Reptile Terrariums and Aquariums
Greenhouses and Plant Propagation
Incubators for Eggs
Home Brewing and Fermentation
Controlling Freezers and Refrigerators
Managing Heating Mats and other Home Appliances

Specifikace

Funkce	Specifikace
Model	ITC-C216T
svtage	220V AC
Maximální výstupní zatížení	10 A / 2200 XNUMX W.
Rozsah regulace teploty	-40 °C až 100 °C (-40 °F až 212 °F)
Rozsah časování	0 to 99 hours 59 minutes
Typ sondy	IP67 Vodotěsný
Délka sondy	2 metru (79 palce)
Materiál	Akrylonitrilbutadienstyren (ABS)
Rozměry	8.8 x 8.9 x 13.7 cm
Hmotnost	250 g
Typ ovladače	Tlačítko

Odstraňování problémů

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

Displej se nerozsvítí: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
Nepřesný údaj teploty: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
Zařízení se nezapíná/nevypíná: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
Alarm zní nepřetržitě: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
Nastavení se neukládá: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

Údržba

Čištění: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
Péče o sondu: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
Skladování: Pokud zařízení skladujete delší dobu, ujistěte se, že je čisté a suché. Skladujte na chladném a suchém místě mimo dosah přímého slunečního záření.

Záruka a podpora

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webwebu nebo se přímo obraťte na jejich zákaznický servis.

Více informací a podpůrných zdrojů naleznete na adrese Obchod Inkbird na Amazonu.

	Uživatelská příručka k regulátoru teploty Inkbird ITC-308 Plug and Play Tento dokument poskytuje komplexního průvodce k regulátoru teploty Inkbird ITC-308 typu Plug and Play a podrobně popisuje jeho funkce, specifikace, provoz a bezpečnostní opatření pro různé aplikace.
	Uživatelská příručka k regulátoru teploty Inkbird ITC-308 Plug and Play Comprehensive user manual for the Inkbird ITC-308, a plug-and-play dual relay output temperature controller. Details specifications, key operations, menu settings, error descriptions, and warranty information for various applications like home-brew, aquariums, and incubation.
	INKBIRD ITC-306A Inteligentní Wi-Fi regulátor teploty pro akvárium - Uživatelská příručka Komplexní uživatelská příručka pro chytrý Wi-Fi regulátor teploty INKBIRD ITC-306A, která podrobně popisuje funkce, nastavení, provoz, řešení problémů a technické specifikace pro použití v akváriu. Naučte se, jak se připojit přes Wi-Fi, nastavit teplotu a spravovat alarmy.
	Uživatelská příručka k regulátoru teploty Inkbird ITC-308 Plug and Play Komplexní uživatelská příručka pro regulátor teploty Inkbird ITC-308 typu Plug and Play. Zahrnuje produkt přes...view, podrobné specifikace, klíčové funkce, provozní pokyny, nastavení nabídky, chybové kódy a informace o záruce.
	Uživatelská příručka k regulátoru teploty INKBIRD ITC-308-WIFI Komplexní uživatelská příručka pro regulátor teploty INKBIRD ITC-308-WIFI s podporou Wi-Fi, která zahrnuje nastavení, provoz, specifikace, shodu s FCC a řešení problémů.
	Uživatelská příručka k regulátoru vlhkosti INKBIRD IHC-200 Tato příručka obsahuje podrobné pokyny k plug-n-play regulátoru vlhkosti INKBIRD IHC-200, které zahrnují jeho specifikace, funkce tlačítek, obsluhu, nastavení, popisy chyb a informace o záruce.