Příručky+

ZR ZRCC01

ZR ZRCC01 Mini Metal Lathe Instruction Manual

Model: ZRCC01 (Heighten Style)

1. Úvod

This manual provides essential instructions for the safe and efficient operation of your ZR ZRCC01 Mini Metal Lathe. This electroplated all-metal miniature lathe is designed for processing materials such as aluminum, wood, and plastic, making it suitable for DIY model making and small craft projects.

ZR ZRCC01 Mini Metal Lathe, front view

Obrázek 1: Přední strana view of the ZR ZRCC01 Mini Metal Lathe, showcasing its compact design and metal construction.

2. Bezpečnostní informace

  • Always wear appropriate personal protective equipment, including safety glasses, when operating the lathe.
  • Ujistěte se, že je obrobek bezpečně třamped before starting the machine.
  • Udržujte ruce a volný oděv mimo pohyblivé části.
  • Do not exceed recommended cutting depths for different materials to prevent motor overload.
  • Disconnect power before performing any adjustments or maintenance.
  • Stroj provozujte v dobře větraném prostoru.

3. Obsah balení

Your ZR ZRCC01 Mini Metal Lathe package includes:

  • 1 x Mini Lathe
  • 1 x Sada příslušenství
  • 1 x napájecí adaptér
  • 1 x Workbench Plate
  • 1 x Manuál

4. Specifikace

  • Rychlost motoru: Až 20,000 XNUMX ot./min
  • Vstupní objemtage/Proud/Výkon: 12V/3A/36W
  • Switch Power Supply Input: 110V-240V
  • Max Processed Material Diameter: 50 mm (Positive Jaw Gripping Range: 3mm-30mm, Opposite Jaw Gripping Range: 3mm-50mm)
  • Max Processed Material Length: 150 mm
  • Chuck and Collet Range: 1 mm až 6 mm
  • X-axis Slider Travel: 150 mm
  • Výška středu: 50 mm
  • Středová vzdálenost: 150 mm
  • Rozměry stroje: 310 mm x 100 mm x 175 mm
  • Hmotnost položky: 10.28 libry
  • Zdroj napájení: AC

5. Nastavení

Follow these steps to set up your mini metal lathe for operation:

  1. Otevřete sklíčidlo: Use the provided iron rods to open the three-jaw chuck.
  2. Vložit obrobek: Place one end of your workpiece into the middle of the chuck.
  3. Zajištění obrobku: Tighten the chuck to firmly hold the workpiece.
  4. Engage Live Center: Rotate the handwheel on the tailstock to push the live center into the center of the workpiece, ensuring a tight fit.
  5. Lock Tailstock: Tighten the tailstock and fix the screw to secure the workpiece in place.
Mini Metal Lathe with workpiece secured in chuck and tailstock

Image 2: The mini metal lathe with a workpiece properly secured between the three-jaw chuck and the live center of the tailstock.

For a visual guide on setting up the lathe, please refer to the video below:

Video 1: Demonstration of securing a workpiece in the mini metal lathe's chuck and tailstock.

6. Provoz

Once the workpiece is secured, you can begin processing:

  1. Tool Setting: Before processing, insert the turning tool into the turning tool clamping jaw. Adjust the slider to align the turning tool horizontally with the live center and the center of the three-jaw chuck.
  2. Zapnutí: Zapněte soustruh.
  3. Control Feed: Move the small slider in the Y-axis direction to control the feed rate.
  4. Control Processing Position: Move the large slider in the X-axis direction to control the processing position.

Důležité poznámky:

  • If the workpiece is not concentric or has an outer imaginary circle, remove the outer imaginary circle before proceeding.
  • Hloubka řezu: For wood, the cutting depth should be less than 2mm per pass. For aluminum or copper, it should be less than 1mm per pass. Exceeding these limits may cause the motor to stop due to self-protection.
Mini Metal Lathe with tool post and sliders

Obrázek 3: Boční strana view of the mini metal lathe, highlighting the tool post and the X and Y axis sliders for precise control.

Observe the lathe in operation by watching the video below:

Video 2: Demonstration of the mini metal lathe processing a workpiece, showing the movement of the sliders and the cutting action.

7. Údržba

Regular maintenance ensures the longevity and optimal performance of your lathe:

  • Clean the machine thoroughly after each use, removing all chips and debris.
  • Lubricate moving parts, such as lead screws and slide ways, periodically with appropriate machine oil.
  • Inspect all fasteners and tighten any that may have loosened during operation.
  • Check the condition of the chuck jaws and replace if worn.

8. Řešení problémů

If you encounter issues with your lathe, consider the following:

  • Motor se během provozu zastaví: This is often due to exceeding the recommended cutting depth for the material. Reduce the cutting amount per pass. The motor has a self-protection feature that will activate to prevent damage.
  • Workpiece Not Secure: Ensure the three-jaw chuck is tightened properly and the live center is firmly pressed against the workpiece. Check that the tailstock screw is fixed.
  • Nepřesné řezy: Verify that the turning tool is correctly aligned horizontally with the live center and the chuck's center. Ensure all sliders and components are free of debris and properly lubricated.

9. Záruka a podpora

The ZR ZRCC01 Mini Metal Lathe comes with a one-year warranty. Free spare parts are available during this period. For any queries or assistance, please contact our online customer service.