aigo AC SE 360 Water Cooler Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AC SE 360 All-in-One (AIO) Liquid CPU Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.

Bezpečnostní informace

• Před instalací se ujistěte, že je počítač vypnutý a odpojený ze zásuvky.
• S komponenty zacházejte opatrně, abyste předešli jejich poškození.
• Refer to your motherboard manual for specific CPU socket and fan header locations.
• Do not attempt to open the pump or radiator as this may void the warranty and cause leaks.
• Uchovávejte mimo dosah dětí.

Obsah balení

Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty.

• aigo AC SE 360 Radiator with Integrated Pump/Water Block
• 3 x 120 mm chladicí ventilátor
• Mounting Hardware for Intel Sockets (LGA 2066/2011-V3/2011/1700/1366/1200/115X)
• Mounting Hardware for AMD Sockets (FM1/FM2/FM2+/AM2/AM2+/AM3/AM3+/AM4)
• Teplovodní pasta (předem nanesená nebo v tubě)
• Šrouby ventilátoru a šrouby chladiče
• Uživatelská příručka (tento dokument)

Specifikace

Nastavení a instalace

This section guides you through the installation process of the aigo AC SE 360 liquid cooler. Ensure your system is powered off and unplugged before proceeding.

1. Připravte chladič a ventilátory

Attach the three 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically pushing air through the radiator and out of the case, or pulling air in).

Obrázek: Shora dolů view of the radiator with fans installed. This shows the orientation of the fans on the radiator.

Obrázek: Zkosená zadní část view of the assembled cooler, highlighting the fans and radiator structure.

2. Install the Radiator in the PC Case

Mount the assembled radiator and fan unit into your PC case. Common mounting locations include the top or front of the case. Use the shorter screws provided to secure the radiator to the case's fan mounts. Ensure there is adequate clearance for the tubes and other components.

Image: Detail of the radiator fins and mounting points, useful for understanding case installation.

3. Příprava patice procesoru

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). Attach the backplate (if required for your socket type) to the rear of the motherboard. Install the standoffs onto the motherboard around the CPU socket.

4. Instalace vodního bloku/čerpadla

Ensure the CPU surface is clean. If thermal paste is not pre-applied to the water block, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS). Carefully place the water block onto the CPU, aligning it with the standoffs. Secure the water block with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Obrázek: Boční view of the pump/water block, illustrating its compact design.

Obrázek: Úhlový view of the complete cooler assembly, showing the connection between the pump and radiator.

5. Připojte kabely

• Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Consult your motherboard manual for the correct header.
• Connect the fan cables to the CPU_FAN header or a dedicated fan controller/hub. If your fans have RGB lighting, connect the RGB cables to a compatible RGB header on your motherboard or an RGB controller.
• Ensure all cables are routed neatly and do not interfere with other components or airflow.

Obrázek: Přední strana view of the cooler with RGB lighting, demonstrating the aesthetic appearance after installation and power connection.

Návod k obsluze

Once installed, the aigo AC SE 360 operates automatically. The pump and fans will adjust their speed based on CPU temperature, managed by your motherboard's BIOS/UEFI settings or dedicated software.

• Počáteční zapnutí: After installation, power on your computer. Monitor CPU temperatures using system monitoring software to ensure proper function.
• Nastavení BIOSu/UEFI: Access your motherboard's BIOS/UEFI to verify that the CPU_FAN header (or AIO_PUMP header) is set to PWM mode and that fan curves are configured for optimal cooling and noise levels.
• Ovládání RGB: If your motherboard supports RGB synchronization, use its software to customize the lighting effects of the fans and pump.

Údržba

Pravidelná údržba pomáhá zajistit dlouhou životnost a optimální výkon vašeho chladiče kapalin.

• Čištění prachu: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Dust accumulation can impede airflow and reduce cooling efficiency.
• Inspekce trubek: Occasionally inspect the tubes for any signs of kinks, leaks, or damage.
• Kontrola ventilátoru: Ensure all fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
• Kontrola čerpadla: Listen for any unusual noises from the pump. A constant, low hum is normal, but grinding or gurgling sounds may indicate an issue.

Odstraňování problémů

Záruka a podpora

aigo products are designed for reliability and performance. For warranty information, technical support, or replacement parts, please refer to the official aigo webnebo kontaktujte svého prodejce.

Oficiální Webmísto: www.aigo.com (Poznámka: Toto je zástupný symbol URL. Please refer to your product packaging or official documentation for the correct support webmísto.)

Please have your product model number (ACSE360-WH) and purchase date ready when contacting support.