ANJ CS040

ANJ Mid Century Modern Accent Chair

Model: CS040 - Instruction Manual

1. Úvod

Thank you for choosing the ANJ Mid Century Modern Accent Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read all instructions carefully before assembly and retain this manual for future reference.

ANJ Mid Century Modern Accent Chair in green with a throw pillow

Figure 1: ANJ Mid Century Modern Accent Chair (Green)

2. Bezpečnostní informace

To ensure safe use of your ANJ Accent Chair, please observe the following:

  • Nepřekračujte maximální nosnost 300 liber.
  • Před použitím se ujistěte, že jsou všechny šrouby a vruty bezpečně utažené. Pravidelně kontrolujte a v případě potřeby dotahujte.
  • Udržujte malé části a obalové materiály mimo dosah dětí, abyste předešli nebezpečí udušení.
  • Nestávejte na židli ani ji nepoužívejte jako schůdky.
  • Židli postavte na rovný povrch, aby se nepřevrhla.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny díly a spojovací materiál. Pokud některé položky chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

  • Opěrka židle
  • Sedák
  • Loketní opěrky (levá a pravá)
  • Legs/Frame Components
  • Throw Pillow (1)
  • Montážní materiál (šrouby, vruty, imbusový klíč)
  • Uživatelská příručka (tento dokument)

4. Nastavení a montáž

Assembly is required. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

  1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a rozložte je. Zkontrolujte seznam obsahu balení.
  2. Attach Armrests to Seat Frame: Align the pre-drilled holes on the armrests with the corresponding holes on the seat frame. Insert the provided bolts and tighten them using the Allen wrench. Do not overtighten initially.
  3. Připevnění opěradla: Slide the backrest into the designated slots on the frame. Ensure it is fully seated. Secure with bolts as instructed in the included hardware guide.
  4. Vložit sedák: Place the seat cushion firmly onto the seat frame.
  5. Konečné utažení: Once all components are in place, go back and securely tighten all bolts and screws.
Diagram showing the dimensions of the ANJ Mid Century Modern Accent Chair

Figure 2: Chair Dimensions for Assembly Reference

Zadní view of the ANJ Mid Century Modern Accent Chair, showing the wooden frame and backrest

Obrázek 3: Zadní view of the assembled chair, highlighting frame connections.

5. Návod k obsluze

The ANJ Mid Century Modern Accent Chair is designed for comfortable seating in various indoor environments. It is ideal for:

  • Čtení: The high back and ergonomic design provide excellent support for extended reading sessions.
  • Relaxační: The plush, high-density sponge cushions offer a comfortable spot to unwind.
  • Zvýrazněné sezení: Its mid-century modern aesthetic enhances the decor of living rooms, bedrooms, offices, or balconies.
Image showing the ANJ Accent Chair in various room settings: living room, bedroom, meeting room, study room

Figure 4: Versatile use of the accent chair in different settings.

6. Údržba

Proper care will extend the life and appearance of your ANJ Accent Chair:

  • Čištění: Otřete dočista s reklamouamp hadříkem. V případě rozlití ihned osušte čistým a suchým hadříkem. Vyhněte se agresivním chemikáliím.
  • Péče o polštář: The cushions are made of high-density sponge with a linen cover. Regularly fluff cushions to maintain their shape.
  • Péče o rám: The solid wood frame can be wiped with a soft, dry cloth. Avoid excessive moisture.
  • Chrániče nohou: The chair includes anti-slip foot pads to protect your floor. Ensure they are intact and clean.
Close-up image highlighting the breathable linen fabric and 7-inch thick cushion of the ANJ Accent Chair

Figure 5: Detail of breathable linen fabric and cushion thickness.

Close-up of the chair's leg with an additional foot pad to prevent slipping and scratching

Figure 6: Anti-slip foot pads for floor protection.

7. Řešení problémů

Pokud narazíte na jakékoli problémy s vaší židlí, podívejte se na následující běžné problémy a jejich řešení:

  • kolísání: Check that all bolts and screws are securely tightened. Ensure the chair is on a flat, even surface.
  • pískání: Re-tighten all connections. A small amount of silicone lubricant can be applied to joints if squeaking persists.
  • Komprese polštáře: This is normal over time. Fluff cushions regularly.
  • Chybějící části: If any parts were missing upon delivery, please contact ANJ customer support immediately.

8. Specifikace

FunkceDetail
ZnačkaANJ
Název modeluCS040
BarvaHigh Back-green
Celkové rozměry26 cm Š x 32 cm H x 29 cm V
Velikost sedadla23 cm Š x 22 cm H
Hmotnost položky35.3 libry
Doporučená maximální hmotnost300 libry
MateriálSolid Wood Frame, Linen Fabric, High-Density Sponge Fill
Speciální funkceErgonomic, High Back, Anti-skip Foot Pads
Zahrnuté komponentyInstallation Hardware, User Manual, 1 Throw Pillow

9. Záruka a podpora

For any questions, concerns, or assistance with your ANJ Mid Century Modern Accent Chair, please contact ANJ customer support. While specific warranty details are not provided in this manual, please refer to your purchase documentation or the retailer's website for warranty information. Keep your proof of purchase for any warranty claims.

Kontaktní údaje: Please refer to the contact details provided by your retailer or on the official ANJ webmísto.

Související dokumenty - CS040

Předview Produktový katalog solárních invertorů, regulátorů nabíjení a baterií ANENJI
Prozkoumejte řadu vysoce účinných solárních invertorů, MPPT solárních regulátorů nabíjení a LiFePO4 baterií ANENJI. Objevte podrobné specifikace, funkce a aplikace pro rezidenční a automobilové použití.
Předview Uživatelská příručka k hybridnímu solárnímu invertoru/nabíječce ANENJI
Tato uživatelská příručka poskytuje komplexní pokyny pro hybridní solární střídač/nabíječ ANENJI 4.2 kVA a 5.0 kVA, které zahrnují instalaci, provoz, specifikace a řešení problémů pro efektivní správu solární energie.
Předview Uživatelská příručka pro nástěnnou LiFePO4 baterii ANENJI řady 5/10KWH
Uživatelská příručka pro nástěnnou LiFePO4 baterii ANENJI řady 5/10KWH, která zahrnuje úvod do produktu, vlastnosti, specifikace, instalaci, paralelní provoz a připojení softwaru.
Předview Průvodce komunikací a porty baterií střídače ANENJI
Technické podrobnosti o komunikačních rozhraních pro baterie střídačů ANENJI, portech RS-232, RS-485 a WIFI, spolu s kompatibilními modely BMS, jako jsou PACE a PYLON.
Předview ALIYIQI 艾力仪器 产品选型手册 – 测量与测试仪器
温州一鼎仪器制造有限公司 (ALIYIQI)提供全面的力学测试仪器产品目录,包括扭矩扳手、推拉力计、硬度计、弹簧试验机等。了解艾力仪器的专业制造能力和高品质产品。
Předview Uživatelská příručka hybridního solárního měniče/nabíječky ANENJI 11KVA 230Vac
Tato uživatelská příručka poskytuje komplexní pokyny pro hybridní solární střídač/nabíječku ANENJI, model 11KVA 230Vac. Zahrnuje instalaci, provoz, specifikace a řešení problémů pro efektivní správu solární energie.