Zavedení
This manual provides comprehensive instructions for the Marvel Legends Series Carnage action figure, inspired by its appearance in the film Venom: Let There Be Carnage. This collectible figure is designed for display and posing, featuring detailed sculpt and articulation. Please read all instructions carefully before handling the product.
Bezpečnostní informace
Varování: Nebezpečí udušení – Mohou se uvolnit malé části. Není vhodné pro děti do 3 let.
Always supervise young children during play to prevent accidental ingestion of small parts. Keep all packaging materials away from children.
Obsah balení
Verify that all components are present upon opening the package.
- Carnage Action Figure
- 6 Accessories (various tendrils and alternate head)

Image: The Carnage action figure displayed with all its included accessories, including multiple tendril attachments and an alternate head.
Nastavení a montáž
The Carnage action figure comes with several interchangeable parts to customize its appearance and posing options.
- Rozbalení: Carefully remove the figure and all accessories from the packaging. Retain packaging for future storage if desired.

Image: The Carnage figure visible within its window box packaging, showcasing the figure and some accessories.
- Attaching Tendrils: The figure features peg holes on its back for attaching the included tendril accessories. Gently insert the pegs of the tendrils into the corresponding holes until secure.

Image: The Carnage figure from a rear view, demonstrating the attachment points for the tendril accessories on its back.
- Interchanging Heads: To change the figure's head, gently pull the existing head off the neck joint. Align the alternate head with the neck joint and push down firmly until it clicks into place.

Image: The Carnage figure with an alternate head featuring an extended tongue, posed dynamically with tendrils.
- Attaching Blade Accessories: The figure includes blade-like accessories that can be attached to its forearms or hands. Identify the appropriate attachment points and gently press the accessories into place.

Image: The Carnage figure with a large, red blade accessory attached to its right forearm, ready for action poses.
Operating and Posing
The Carnage action figure features over 20 points of articulation, allowing for a wide range of dynamic poses. Handle joints gently to avoid damage.
- Hlava: The head can rotate and tilt.
- Shoulders: Ball joints allow for rotation and outward movement.
- lokty: Double-jointed for extensive bending.
- Wrists: Rotate and hinge.
- Trup: Features an ab-crunch and waist swivel for upper body movement.
- Boky: Ball joints for leg rotation and outward spread.
- Thigh Swivel: Allows for rotation of the upper leg.
- Knees: Double-jointed for deep bending.
- Ankles: Hinge and rocker joints for stability and dynamic foot placement.

Image: The Carnage figure in a crouched, ready-to-strike pose, highlighting its extensive articulation.

Image: The Carnage figure in a wide, aggressive stance with tendrils extended, showcasing its ability to hold complex poses.
Údržba a péče
Proper care will ensure the longevity of your collectible figure.
- Čištění: Dust the figure regularly with a soft, dry cloth or a soft brush. For stubborn dirt, lightly dampen a cloth with water and gently wipe the surface, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Skladování: Figurku skladujte mimo dosah přímého slunečního záření, extrémních teplot a vysoké vlhkosti, abyste zabránili změně barvy nebo degradaci materiálu.
- Zacházení: Always handle the figure by its main body. Avoid excessive force when posing or attaching accessories, as this can damage joints or break small parts.
Odstraňování problémů
Pokud máte nějaké problémy s postavou, zvažte následující:
- Ztuhlé klouby: If a joint is stiff, gently warm the area with a hairdryer on a low setting for a few seconds (do not overheat) or immerse the joint in warm water for a short period. This can make the plastic more pliable.
- Volné klouby: For slightly loose joints, a small amount of clear nail polish or a specialized joint tightener can be applied to the joint peg and allowed to dry. This adds friction.
- Nevhodné příslušenství: Ensure you are using the correct accessory for the intended attachment point. Do not force accessories; if a fit is too tight, gently warm the receiving port as described for stiff joints.
Specifikace
| Funkce | Detail |
|---|---|
| Rozměry produktu | 8.5 x 2.52 x 9.02 palce |
| Hmotnost položky | 14.9 unce |
| Číslo modelu položky | F9009 |
| Výrobcem doporučený věk | 4 let a více |
| Datum vydání | 21. června 2024 |
| Výrobce | Hasbro |
Záruka a podpora
For information regarding warranty coverage or product support, please refer to the official Hasbro webwebu nebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.
Výrobce: Hasbro
Webmísto: www.hasbro.com





