BAIZIFU 36V/48V Brushless Motor Controller Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your BAIZIFU 36V/48V Waterproof Brushless Motor Speed Controller. This controller is designed for electric bicycles and scooters, supporting motors with power ratings from 150W to 300W. Please read this manual thoroughly before use to ensure proper function and safety.

2. Bezpečnostní opatření

Před zahájením jakékoli instalace, údržby nebo řešení problémů vždy odpojte napájení.
Ensure all connections are secure and correctly wired to prevent short circuits or damage.
Ověřte, že vstupní objemtage (36V/48V) matches your battery system.
Avoid exposing the controller to extreme temperatures or direct impact.
Although waterproof, avoid submerging the controller in water for extended periods.
Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným technikem.

3. Konec produktuview

3.1 Vlastnosti

36V/48V Rated Voltage
150-300 Watts Rated Power
Designed for electric bicycles and scooters, including mechanical or electric forklifts.
Brushless Controller technology for efficient operation.
Voděodolné provedení pro zvýšenou odolnost.

3.2 Specifikace

Atribut	Hodnota
Značka	BAIZIFU
svtage	36V / 48V
Jmenovitý výkon	150W - 300W
Materiál	Hliník
Hmotnost položky	8 unce (0.5 libry)
Rozměry balení	3 x 3 x 2.1 palce
Záruka	1 rok

3.3 Komponenty produktu

BAIZIFU 36V/48V Brushless Motor Controller with various colored wires — Image 1: The BAIZIFU 36V/48V Brushless Motor Controller, showing its compact aluminum casing and multiple colored wiring harnesses for connection to various components.

BAIZIFU 36V/48V Brushless Motor Controller with dimensions and specifications — Obrázek 2: Detailní view of the motor controller, highlighting its dimensions (9cm/3.54inch length, 5cm/1.96inch width, 3cm/1.18inch height) and key features such as 36V/48V voltage support, 150-300W power support, waterproofing, and overheating protection. Note the high-temperature fireproof wire for safety and durability.

4. Instalační příručka

Follow these steps to correctly install your brushless motor controller. Refer to the wiring diagram for visual guidance.

Wiring diagram for BAIZIFU 36V/48V Brushless Motor Controller — Image 3: Comprehensive wiring diagram illustrating connections for the motor wire, switch wire (on-off switch), speed control line (throttle switch/handle), and power cable (battery). This diagram helps ensure correct and secure connections for optimal performance.

Connect Motor Wire: Connect the motor wire from the controller to your motor. Ensure the connectors are firmly seated.
Připojte napájecí kabel: Connect the power cable from the controller to your battery. Observe correct polarity (red to positive, black to negative).
Connect Speed Control Line: Attach the speed control line to your throttle switch or handle.
Connect Switch Wire: Connect the switch wire to your on-off switch.
Zabezpečená připojení: Dvakrát zkontrolujte všechna připojení, zda jsou těsná a správná.
Montážní ovladač: Securely mount the controller in a suitable location on your electric bicycle or scooter, ensuring it is protected from physical damage and excessive heat.

4.1 Instalační video

Video: This video demonstrates the process of connecting the brushless motor and controller to a power source, illustrating the wiring steps for a functional setup.

5. Provozní pokyny

Once the controller is correctly installed, follow these steps to operate your electric vehicle:

Zapnutí: Turn on the main power switch connected to the controller.
Ovládání škrticí klapky: Use the throttle handle or switch to control the motor speed. Gradually increase the throttle for smooth acceleration.
Monitorování výkonu: Pay attention to the motor's response and any unusual sounds during operation.
Vypnout: When finished, turn off the main power switch to disconnect power to the controller and motor.

6. Údržba a péče

Pravidelná kontrola: Periodically check all wiring connections for any signs of wear, corrosion, or looseness.
Čištění: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Avoid using harsh chemicals.
Ochrana životního prostředí: While waterproof, protect the controller from prolonged exposure to heavy rain or direct water jets.
Skladování: If storing the vehicle for an extended period, ensure the controller is disconnected from the battery.

7. Průvodce odstraňováním problémů

If you encounter issues with your motor controller, refer to the table below for common problems and solutions.

Problém	Možná příčina	Řešení
Motor se nespouští	No power, loose connections, faulty switch.	Check battery charge, verify all wiring connections, test the on-off switch.
Motor běží přerušovaně	Loose wiring, intermittent power supply, throttle issue.	Inspect all connections, check battery output, test throttle functionality.
Motor runs but no speed control	Faulty throttle, speed control line disconnected.	Check speed control line connection, test or replace throttle.
Ovladač se nadměrně zahřívá	Overload, poor ventilation, short circuit.	Reduce load, ensure proper airflow around controller, check for short circuits in wiring.

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

8. Záruka a podpora

8.1 Informace o záruce

This BAIZIFU Brushless Motor Controller comes with a 1-letá záruka from the date of purchase. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.

To claim warranty service, please retain your proof of purchase and contact our customer support team.

8.2 Zákaznická podpora

For technical assistance, troubleshooting, or warranty inquiries, please contact BAIZIFU customer support through the retailer's platform or the official brand website. Please have your product model number (B0CJ3DPVC6) and purchase details ready when contacting support.

BAIZIFU B0CJ3DPVC6