1. Úvod a konecview
The Hbada Ergonomic Office Chair is designed to provide comprehensive support for your back, lumbar region, hips, and arms. Its S-shaped backrest promotes proper spinal alignment, ensuring comfort during extended periods of sitting. This chair features a unique cushion design with independent springs and memory foam for superior comfort and durability, along with breathable mesh fabric to prevent discomfort from prolonged use.
2. Nastavení a montáž
For detailed assembly instructions, please refer to the official installation manual provided with your chair or download the PDF version zde. An instructional video is also available to guide you through the assembly process.
Video 1: Official Hbada Office Chair Installation Guide. This video demonstrates the step-by-step assembly of the chair, including attaching the base, armrests, mechanism, backrest, and headrest.
Montážní krokyview:
- Sestava základny: Insert the chair legs into the base core and secure them with the provided E screws.
- Montáž kola: Insert the wheels into each chair leg separately.
- Gas Cylinder Placement: Insert the gas cylinder into the central hole of the assembled base.
- Armrest Attachment: Place the cushion as shown in the manual (footrest face down). Align the armrest holes with the cushion's bottom holes. Screw in the B screws about 1/3 of the way, then tighten them one by one.
- Mechanism Installation: Position the tilt mechanism as shown, aligning it with the holes on the underside of the cushion. Fix the mechanism using the C screws. Tip: The wood panel is curved; ensure all four screws are screwed in 1/3 before tightening them completely to ensure proper fit.
- Gas Cylinder Insertion (Mechanism): Insert the gas cylinder into the hole of the mechanism.
- Backrest Attachment: Align the holes of the backrest with the corresponding holes in the mechanism. Screw in the D screws about 1/2 of the way, then tighten them one by one.
- Upevnění opěrky hlavy: Align the hole of the headrest with the hole of the backrest. Screw in the E screws about 1/2 of the way, then tighten them one by one.
- Instalace dekorativního krytu: Align the positioning column of the headrest decorative cover with the headrest bracket hole, then firmly press the cover into place.
3. Pokyny k obsluze a nastavení
The Hbada Ergonomic Office Chair offers multiple adjustment features to customize your seating experience for optimal comfort and support.
- Nastavitelná bederní opěrka: The lumbar support can be adjusted up, down, back, and forward to prevent lower back pain during long periods of sitting. This precise adjustment helps maintain the natural curve of your spine.
Obrázek 2: Detailní view of the adjustable lumbar support mechanism, showing its range of motion. - Nastavitelná opěrka hlavy: The 2D headrest can be adjusted in height by 3.94 inches and swivels up to 40 degrees. This feature helps reduce cervical pressure and supports your neck effectively.
Figure 3: Illustration of the headrest's adjustable height and rotation capabilities. - Funkce naklonění: The backrest can recline up to 135 degrees, offering a wider range of motion for greater comfort during work or leisure. This allows for a relaxing posture for quick breaks.
Figure 4: The chair in its fully reclined position, highlighting support points for neck, waist, hips, and legs. - Nastavitelné područky: The armrests can be raised or lowered, as well as adjusted up or down by 3.3 inches, to accommodate different desk heights and sitting positions. This prevents arms from dangling and reduces shoulder stiffness.
Figure 5: Close-up of the armrest, illustrating its vertical adjustment range. - Nastavení výšky sedadla: The chair's height can be adjusted by 3.35 inches to adapt to users of various heights. This ensures your feet can rest flat on the floor or a footrest, promoting good posture.
4. Údržba
To ensure the longevity and optimal performance of your Hbada Ergonomic Office Chair, regular maintenance is recommended:
- Čištění: Otřete dočista s reklamouamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the mesh or other materials.
- Utahování šroubů: Periodically check and tighten all screws, especially those on the armrests and mechanism, to ensure stability and prevent loosening over time.
- Kontrola koleček: Inspect the casters (wheels) regularly for any debris (hair, dust) that might hinder smooth movement. Clean them as needed.
- Pohyblivé části: Ensure all adjustable components (lumbar support, headrest, recline mechanism) move smoothly. If any stiffness is noted, a small amount of silicone spray can be applied to pivot points, avoiding fabric or mesh.
5. Řešení problémů
Zde jsou některé běžné problémy a jejich možná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Židle se zdá nestabilní nebo kymácející | Loose screws, especially on the base or mechanism. | Check and tighten all assembly screws, particularly those connecting the chair legs to the base core and the mechanism to the seat cushion. |
| Židle se nedá nastavit na výšku | Gas cylinder issue or lever malfunction. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas cylinder may need replacement. Contact customer service. |
| Casters (wheels) do not roll smoothly | Debris caught in casters or worn-out wheels. | Remove any hair or debris from the casters. If wheels are damaged, consider replacing them. |
| Chassis does not fit properly during assembly | Screws not tightened correctly or simultaneously. | Ensure all four screws for the mechanism are screwed in 1/3 of the way before fully tightening them one by one. This allows the curved wood panel to align correctly. |
If you encounter any problems that cannot be resolved with the above solutions, please contact Hbada customer service for professional assistance.
6. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Hbada |
| Název modelu | P5 |
| Barva | Black Frame Gray Mesh |
| Rozměry produktu | 27.56"H x 27.56"Š x 40"V |
| Doporučená maximální hmotnost | 150 kg (300 lb) |
| Styl zad | Pevná záda |
| Speciální funkce | Adjustable Lumbar, Adjustable Height, Adjustable Headrest, Ergonomic |
| Pokyny pro péči o produkt | Dočista vyčistit |
| Doporučená použití | Office, Relaxing |
| Materiál výplně | Paměťová pěna |
| Pohyb základny nábytku | Otočný |
| Naklánění | Ano |
| Hmotnost položky | 44 libry |
7. Záruka a podpora
The Hbada Ergonomic Office Chair has passed SGS certification and BIFMA testing, ensuring its quality and safety. Hbada is committed to providing excellent customer service and support.
Key aspects of Hbada's customer service include:
- Parts only replaced, not repaired.
- 30 dní bez důvodu k vrácení.
- Delivered directly to your door.
- 15 days guaranteed price.
- Damaged upon arrival: repair and replacement guaranteed.
For any inquiries, installation guidance, or repair services, please contact Hbada customer support directly. Your satisfaction is our priority.
