Uživatelská příručka k laserovému gravírovacímu stroji ATOMSTACK S30 Pro

1. Úvod

The ATOMSTACK S30 Pro is a professional-grade laser engraving and cutting machine designed for high precision and efficiency. Featuring a powerful 33000mW laser output and advanced control methods, it is suitable for a wide range of materials and applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Figure 1: The ATOMSTACK S30 Pro Laser Engraving Machine, showcasinjeho design a examples of engraved and cut materials.

2. Bezpečnostní informace

Operating a laser engraving machine requires strict adherence to safety protocols to prevent injury and damage. The ATOMSTACK S30 Pro is a Laser Class 4 device, indicating a high-power laser that can cause severe eye and skin damage from direct or scattered exposure. Always prioritize safety.

• Ochrana očí: Always wear the provided eye protection glasses during operation. The panoramic lens eye protection cover filters out 97% of harmful UV rays, but additional safety glasses are recommended.
• Větrání: Stroj používejte v dobře větraném prostoru, aby se rozptýlily výpary a kouř vznikající během gravírování a řezání.
• Požární bezpečnost: Mějte po ruce hasicí přístroj. Nenechávejte stroj během provozu bez dozoru, zejména při řezání hořlavých materiálů.
• Nouzové zastavení: Familiarize yourself with the emergency stop switch and its location. In case of any malfunction or emergency, immediately press this switch to halt operation.
• Děti a domácí mazlíčci: Keep children and pets away from the operating area to prevent accidental exposure to the laser.
• Materiálová kompatibilita: Only engrave or cut materials specified as safe. Avoid reflective or unknown materials that could cause unexpected laser reflections.

Figure 2: Key safety features of the ATOMSTACK S30 Pro, highlighting the eye protection cover and the prominent emergency stop button for immediate shutdown.

3. Obsah balení

Před zahájením montáže se prosím ujistěte, že jsou všechny součásti přítomny a nepoškozené:

• ATOMSTACK S30 Pro Laser Engraving Machine Frame
• 33000mW Laser Module
• Air Assist Pump Kit
• Control Box with Touchscreen
• Napájecí adaptér a kabely
• USB propojovací kabel
• Ochranné brýle
• Materiál Sampsoubory pro testování
• Uživatelská příručka (tento dokument)
• Assembly Tools (screws, wrenches, etc.)

4. Nastavení

Follow these steps to assemble and prepare your ATOMSTACK S30 Pro for first use:

1. Rozbalení: Carefully remove all components from the packaging. Keep the original packaging for future storage or transport.
2. Sestava rámu: Sestavte hliníkový profilfile frame according to the included quick start guide. Ensure all screws are tightened securely for stability.
3. Instalace laserového modulu: Mount the 33000mW laser module onto the gantry. The S30 Pro features a tool-free focus and height adjustment knob for easy installation.
4. Control Box Connection: Connect the control box to the main frame and the laser module using the provided cables.
5. Připojení vzduchového pomocného čerpadla: Connect the air assist pump to the designated port on the laser module and the control box. Ensure the air hose is securely attached.
6. Připojení napájení: Connect the power adapter to the control box and then to a suitable power outlet (AC100-240V, 50/60Hz).
7. Instalace softwaru: Install the recommended software (LaserGRBL or LightBurn) on your computer. These operating systems support Win XP, Win 7, Win 8, XP, Win 10 system.
8. Počáteční test: Perform a small test engraving on a scrap piece of material to verify proper setup and laser alignment.

Obrázek 3: Přesview of the ATOMSTACK S30 Pro's core components and features, essential for understanding its capabilities during setup.

5. Provoz

The ATOMSTACK S30 Pro offers versatile control methods and powerful engraving/cutting capabilities. Always ensure proper material placement and laser focus before starting any operation.

5.1. Kontrolní metody

The S30 Pro supports three primary control methods:

• Ovládání počítačem: Connect via USB and use LaserGRBL or LightBurn software for comprehensive control.
• Ovládání dotykovou obrazovkou: Insert a TF/SD card with your design files and operate directly via the integrated touchscreen.
• Ovládání chytrým telefonem: After a firmware update, download the ATOMSTACK app and connect via Wi-Fi for mobile operation.

Figure 4: Illustration of the diverse control options available for the ATOMSTACK S30 Pro, including touchscreen, smartphone, and computer interfaces.

5.2. Material Preparation and Focusing

Ensure your material is flat and securely placed on the working area. The S30 Pro features a fixed-focus laser, eliminating the need for manual focusing. Simply ensure the material thickness is within the optimal range for the laser's focal point.

Figure 5: Demonstrating the ultra-fine laser spot of the S30 Pro, crucial for achieving high-precision engraving results.

5.3. Engraving and Cutting

The S30 Pro excels in both engraving and cutting tasks. Its 33000mW output allows for deep cuts and intricate engravings.

• Rytina: Achieve precise and high-contrast engravings on various materials, including wood, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, non-reflective coated metals, 304 mirror stainless steel, glass, ceramic, cotton fabric, and slate. The 32-bit motherboard provides 256-bit color gradient mapping for enhanced detail.
• Řezání: Capable of cutting 20mm wood, 10mm black acrylic in a single pass, and 0.1mm stainless steel. With multiple passes, it can cut 25mm thick wood and 30mm black acrylic. The integrated air assist pump significantly improves cutting capabilities and prevents laser head clogging.

Figure 6: A visual guide to the wide array of materials compatible with the ATOMSTACK S30 Pro for both engraving and cutting.

Figure 7: Detailed illustration of the ATOMSTACK S30 Pro's impressive single-pass cutting thickness on various materials.

Figure 8: Visual representation of the S30 Pro's enhanced working speeds for both cutting and engraving, demonstrating its efficiency.

6. Údržba

Regular maintenance ensures the longevity and consistent performance of your ATOMSTACK S30 Pro.

• Čištění laserových čoček: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser output.
• Rail and Belt Cleaning: Keep the guide rails and belts free from dust and debris to ensure smooth movement of the laser module. Use a dry cloth or compressed air.
• Tryska pro pomocný vzduch: Regularly check the air assist nozzle for any blockages or buildup, especially after cutting materials that produce significant residue. The new poly wind cover design helps prevent clogging.
• Aktualizace firmwaru: Check the official ATOMSTACK website for any available firmware updates to ensure your machine has the latest features and performance improvements.
• Generální úklid: Otřete vnější povrch stroje čisticím prostředkemamp hadříkem k odstranění prachu a zbytků.

Figure 9: Highlighting the benefits of the standard air assist kits in maintaining a clean laser path and preventing material residue buildup.

7. Řešení problémů

Zde jsou některé běžné problémy a jejich možná řešení:

• Laser nesvítí:
  - Check power connections.
  - Ensure the emergency stop button is disengaged.
  - Verify software settings and laser power output.
• Špatná kvalita gravírování/řezání:
  - Ensure the material is flat and properly positioned.
  - Clean the laser lens.
  - Adjust laser power and speed settings in your software.
  - Check for any obstructions in the laser path or air assist nozzle.
• Stroj nereaguje:
  - Restart the machine and your controlling device (computer/smartphone).
  - Check USB or Wi-Fi connection.
  - Ensure firmware is up to date.
• Neobvyklé zvuky:
  - Inspect the belts and rails for debris or misalignment.
  - Lubricate moving parts if necessary (refer to detailed maintenance guide).

8. Specifikace

9. Záruka a podpora

Informace o záruce a technickou podporu získáte na oficiálních stránkách společnosti ATOMSTACK. website or contact the seller directly. Keep your purchase receipt as proof of purchase for warranty claims. Regular updates and support resources may be available online.