Young Electric EZ-FOLD 2-EBIKE RACK WITH RAMP - Návod k použití

Konec produktuview

Skládací nosič na 2 elektrická kola Young Electric EZ s RAMP is a robust hitch-mounted bike carrier engineered for electric bikes and standard bicycles. It boasts a substantial 200 lbs capacity, accommodating two bikes with up to 100 lbs each. Designed for durability and ease of use, this rack ensures secure transport for your bicycles on various vehicle types.

• 200 lbs Capacity: Supports two electric bikes or bicycles, 100 lbs per bike.
• V-Groove Ramp: Facilitates easy loading and unloading of heavy bikes.
• Patented Anti-Wobble System: Ensures stable and secure transport, minimizing movement.
• Scratch-Resistant Straps: Ratchet strap system with soft padding protects bike frames.
• Skládací design: Allows for convenient storage and transport when not in use.
• Odolná konstrukce: Made from lightweight aluminum and steel with a 1000-hour salt spray resistance coating for weatherproofing.
• Univerzální kompatibilita: Fits any vehicle with a 2-inch receiver.

Nastavení a montáž

Follow these steps for proper assembly and installation of your E-Bike Rack. Refer to the included English Manual for detailed diagrams.

1. Attaching the Rack to Your Vehicle

Insert the main hitch bar of the bike rack into your vehicle's 2-inch receiver. Secure it using the provided locking bolt and pin. Ensure the bolt is tightened sufficiently to eliminate wobble, as demonstrated in the assembly video.

For tightening the bolt, a 24mm socket wrench is recommended for optimal leverage and to prevent binding, ensuring a secure fit.

2. Assembling the Bike Platforms and Support Arms

Attach the bike platforms and vertical support arms to the main rack structure. Ensure all bolts are securely tightened. The vertical support arms feature adjustable ratcheting clamps with soft padding to protect your bike's frame or seat post.

Návod k obsluze

1. Loading Your E-Bikes

Before loading, ensure the rack is in the lowered, ready-to-use position. Remove the ratcheting posts from the vertical bars to avoid scratching your bikes during loading. Utilize the V-groove ramp for effortless rolling of your e-bikes onto the platforms. The ramp can be attached to either side of the rack for convenience.

2. Securing Your E-Bikes

Once the bikes are on the platforms, reattach the ratcheting posts and secure them to your bike's frame or seat post. Adjust the wheel cradles to fit snugly against the tires and use the ratchet straps to firmly secure both the front and rear wheels. Ensure straps are tightened to prevent any movement during transit.

Vlastnosti a specifikace

The EZ-FOLD 2-EBIKE RACK WITH RAMP is built with user convenience and bike safety in mind. Its design incorporates several key features for a superior user experience.

• Kapacita zatížení: 200 lbs total (100 lbs per bike).
• Kompatibilita pneumatik: Fits tires up to 5 inches wide.
• Kompatibilita rozvoru: Accommodates wheelbases up to 50 inches.
• Kompatibilita tažného zařízení: Designed for 2-inch receivers.
• Materiál: Lightweight aluminum and steel construction.
• Odolnost proti korozi: 1000-hour salt spray resistance coating.
• Rozměry: 69.1 x 40.3 x 41.5 inches (L x W x H).
• Hmotnost položky: 75 liber.

Údržba

Regular maintenance ensures the longevity and safe operation of your Young Electric E-Bike Rack.

• Čištění: Periodically clean the rack with mild soap and water to remove dirt and road grime. Rinse thoroughly and dry.
• Inspekce: Before each use, inspect all bolts, nuts, and straps for tightness and wear. Ensure all moving parts operate smoothly.
• Mazání: Apply a small amount of lubricant to hinge points and moving parts as needed to maintain smooth operation.
• Skladování: When not in use, fold the rack and store it in a dry place to protect it from extreme weather conditions.

Odstraňování problémů

If you encounter any issues with your E-Bike Rack, refer to the common troubleshooting tips below.

• Kolébání stojanu: Ensure the hitch bolt is fully tightened. The patented anti-wobble system should minimize movement.
• Kola nejsou bezpečná: Verify that all ratchet straps are pulled tight and the wheel cradles are adjusted snugly against the tires. Ensure the vertical support arms are properly clamped to the bike frames/seat posts.
• Obtížnost skládání/rozkládání: Check for any obstructions or debris in the hinge mechanisms. Lubricate moving parts if necessary.
• Ramp Problémy: Zajistěte ramp is correctly inserted into the designated holes on the platform.

For further assistance, please contact Young Electric customer support.

Záruka a podpora

Your Young Electric E-Bike Rack comes with a 1-year manufacturer's warranty, ensuring peace of mind regarding product quality and performance.

Často kladené otázky (FAQ)

• When can I get my ebike? Usually, the item will be shipped out from our California warehouse within 2 working days, and then delivered by FedEx after about 5-7 days with the tracking number.
• Je snadné sestavit? Yes, this electric bike is 95% assembled, you could totally assemble it by yourself. Assembly video is listed on the purchase page & Specific manual will arrive in the package.
• What should I do if the ebike is damaged? It will be the most effective way to reach out to us on amazon. NOTE: Please keep the original package if you need return it.
• Online centrum nápovědy: We believe in ‘customer first’. If you have any questions, please consult us. All emails would be replied within 24 hours in working days.

For any inquiries or support, please refer to the contact information provided in your product packaging or visit the official Young Electric webmísto.