DAKASON 4FT Vapor Tight LED Light with Motion Sensor Instruction Manual

1. Úvod

Thank you for choosing the DAKASON 4FT Vapor Tight LED Light with Motion Sensor. This fixture is designed for durability and efficiency in challenging environments. It features adjustable wattage, an IP65 waterproof rating, and integrated motion and daylight sensors for optimized energy consumption.

This manual provides essential information for the safe installation, operation, and maintenance of your LED light fixture. Please read it thoroughly before installation and keep it for future reference.

2. Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení.
Instalaci by měl provést kvalifikovaný elektrikář v souladu se všemi národními a místními elektrotechnickými předpisy.
Zajistěte přívod objtage is compatible with the fixture's requirements (100-277V AC).
Do not handle live wires. Always use appropriate personal protective equipment.
Neupravujte svítidlo ani jej nepoužívejte k jiným účelům, než ke kterým je určeno.
Během provozu udržujte hořlavé materiály v dostatečné vzdálenosti od svítidla.
This fixture is rated IP65 for dust and water jet protection. Ensure all connections are properly sealed during installation to maintain this rating.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.

1 x DAKASON 4FT Vapor Tight LED Light Fixture
2 x V-hooks
2 x montážní držáky
4 x Plastic Wall Plugs
4 x šrouby
4x těsnění

Image showing all included mounting hardware: V-hooks, mounting brackets, plastic wall plugs, screws, and gaskets.

Figure 3.1: Included Mounting Kit and Components

4. Specifikace

Značka	DAKASON
Název modelu	LED parotěsné světlo
Číslo modelu	P4-54A-50
Velikost	4FT (47.2 inches)
Wattage	Adjustable: 40W / 50W / 60W
Jas	Až 21 000 lumenů (při 60 W)
Účinnost	110 lumenů na watt
svtage	100-277V AC
Teplota barev	5000 Kelvinů (studená bílá)
Hodnocení IP	IP65 (Waterproof, Dust-tight)
Materiál	Polycarbonate (PC) housing and lens
Speciální funkce	Dimmable, Motion Sensor, Photocell (Daylight Sensor), Wattage Nastavitelné
Typ montáže	Ceiling Mount / Wall Mount (Surface Mount)
Certifikace	Seznam UL
Životnost	50,000 hodin
Rozměry produktu	47.2 cm D x 3.74 cm Š x 3.38 cm V
Hmotnost položky	4.74 libry

5. Nastavení a instalace

Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for surface mounting on ceilings or walls.

5.1. Montáž svítidla

Připravte montážní povrch: Choose a suitable location for the fixture. Mark the drilling points for the mounting brackets using the fixture as a guide.
Instalace montážních držáků: Drill pilot holes at the marked locations. Insert the plastic wall plugs (if needed for drywall/masonry) and secure the mounting brackets to the surface using the provided screws. Ensure the brackets are firmly attached.
Zajistěte přípravek: Carefully align the fixture with the installed mounting brackets and secure it in place. The fixture can be clipped into the brackets.

Diagram showing the components of the vapor tight light fixture including stainless steel clips, mounting bracket, waterproof cable gland, reliable driver, and PC lens & housing.

Figure 5.1: Fixture Components and Mounting Points

A person installing the DAKASON LED light fixture in a garage, with the mounting brackets and screws visible.

Obrázek 5.2: Přample of Fixture Installation

5.2. Elektrické zapojení

Ensure power is OFF before wiring. The fixture is designed for 100-277V AC input. Connect the supply wires to the fixture's internal wiring terminals:

Připojte Živý (černý) wire from the power supply to the fixture's Live terminal.
Připojte neutrální (bílá) wire from the power supply to the fixture's Neutral terminal.
Připojte Ground (Green/Bare Copper) wire from the power supply to the fixture's Ground terminal.

Use the waterproof cable gland to ensure a sealed entry point for the wiring, maintaining the IP65 rating.

Close-up of the LED driver inside the fixture, showing input and output wiring terminals.

Figure 5.3: Internal Wiring and Driver

6. Obsluha a nastavení

The DAKASON LED Vapor Tight Light features adjustable wattage and intelligent sensor controls. These settings are configured using dip switches located inside the fixture.

6.1. Wattage Úprava

The fixture allows you to select between three wattage outputs: 40W, 50W, and 60W. This adjusts the light output (lumens) accordingly.

40W: Přibližně 4400 lumenů
50W: Přibližně 5500 lumenů
60W: Přibližně 6600 lumenů

Chcete-li upravit wattage, najděte vodutage selection switch inside the fixture and set it to your desired output. Ensure power is disconnected before making adjustments.

Image showing a workshop setting with three different light levels corresponding to 40W, 50W, and 60W, and a close-up of the wattage přepínač výběru.

Obrázek 6.1: Wattage Options and Selection

6.2. Motion Sensor Settings

The integrated motion sensor allows for automatic lighting control based on presence. Settings are configured via dip switches.

Close-up of the dip switch panel for motion sensor settings, showing options for sensitivity, hold time, daylight sensor, stand-by period, stand-by dimming level, and sensor mode.

Figure 6.2: Motion Sensor Dip Switch Panel

Refer to the diagram on the fixture's sensor module for specific dip switch positions. Key settings include:

Citlivost detekce: Adjusts how easily the sensor detects motion (e.g., 50% or 100%).
Doba držení: The duration the light stays at 100% brightness after motion is detected and then ceases (e.g., 5s, 90s, 5min, 10min).
Pohotovostní doba: The duration the light remains at a dimmed level after the hold time expires and before turning completely off (e.g., 0s, 10s, 15min, +∞ for always on at dim level).
Úroveň stmívání v pohotovostním režimu: The brightness level during the stand-by period (e.g., 20% or 30%).
Režim senzoru: Allows enabling or disabling the motion sensor function entirely.

Example of Motion Sensor Logic:

Six-panel diagram illustrating the motion sensor's behavior at a train station: light off with sufficient daylight, dims to 20% with low ambient light, 100% with motion, stays on for hold time, dims to standby, then off when ambient light is high.

Figure 6.3: Motion Sensor Operation Flow

6.3. Daylight Sensor (Photocell)

The daylight sensor (photocell) automatically controls the light based on ambient light levels, saving energy during daylight hours.

Daylight Priority Technology: The sensor will turn on the light fixture when ambient light is below 50 Lux (dusk), even without motion.
When ambient light is above 50 Lux (dawn), the sensor will switch off the light fixture, even if motion is detected.
The daylight sensor function can be disabled via a dip switch if not required.

Image showing a building exterior at dusk and dawn, illustrating how the daylight sensor automatically turns the lights on when ambient light is low and off when it's high.

Figure 6.4: Daylight Sensor Auto On/Off

7. Údržba

The DAKASON LED Vapor Tight Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

Čištění: Před čištěním odpojte napájení. Otřete svítidlo měkkým hadříkem.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens.
Inspekce: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the stainless-steel hasps and clips are securely fastened to maintain the vapor-tight seal.
LED diody: The LEDs are maintenance-free and have a lifespan of 50,000 hours. They are not user-replaceable.

8. Řešení problémů

If you encounter issues with your DAKASON LED Vapor Tight Light, refer to the following common problems and solutions:

Problém	Možná příčina	Řešení
Světlo se nerozsvítí.	No power supply; incorrect wiring; sensor disabled or misconfigured; ambient light too high.	Check circuit breaker and wiring connections. Verify sensor settings (Daylight Sensor, Sensor Mode). Ensure ambient light is below 50 Lux if Daylight Sensor is enabled.
Light stays on continuously or for too long.	Motion sensor Hold Time or Stand-by Period set too long or to infinite (+∞); constant motion in detection area; sensor malfunction.	Adjust Hold Time and Stand-by Period dip switches. Ensure no continuous motion is triggering the sensor. If issue persists, contact support.
Light turns on/off too frequently or is too sensitive.	Motion sensor sensitivity set too high; environmental factors (e.g., small animals, moving objects, vibrations).	Reduce the Detection Sensitivity setting on the dip switch. Consider the mounting location to minimize false triggers.
Světlo bliká.	Incompatible dimmer switch (this fixture is not designed for external dimmers); power supply instability; rare individual sensitivity to LED refresh rates.	Ensure no external dimmer switches are used. Check power supply stability. While most users do not perceive flicker, some individuals may be more sensitive to the inherent refresh rate of LED lighting.
Světlo není dostatečně jasné.	Wattage setting is too low; Stand-by Dimming Level is active.	Upravte wattage selection switch to a higher setting (e.g., 60W). Check motion sensor settings to ensure the light is not in a dimmed stand-by state.

9. Záruka a podpora

The DAKASON LED Vapor Tight Light is backed by a 5-letá záruka, ensuring its quality and performance. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact DAKASON customer support. Provide your purchase details and model number (P4-54A-50) when contacting support to expedite assistance.

You can typically find contact information for the seller or manufacturer through your purchase platform or the DAKASON official webmísto.

DAKASON P4-54A-50