Návod k obsluze pro pokročilý výsuvný a naklápěcí držák televizoru Kanto TE300

1. Úvod

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Kanto TE300 Advanced Extend and Tilting TV Wall Mount. The TE300 is designed to securely mount flat-panel televisions ranging from 43 to 90 inches and supporting up to 150 lbs. Its design allows for easy access to TV inputs and offers enhanced viewing flexibility through tilt and swivel adjustments.

2. Vlastnosti produktu

• Easy Input Access: Extends up to 6 inches from the wall, providing convenient access to cables and ports at the rear of your television.
• Vylepšená viditelnost: Allows for panning your TV up to 8 degrees left or right, and tilting forward 12 degrees or backward 2 degrees for optimal viewing angles and glare reduction.
• Jednoduchá instalace: Designed for straightforward setup with clear instructions and a comprehensive hardware kit.
• Perfektní umístění: Features oversized TV brackets for vertical adjustment and a wide, open-frame wall plate for horizontal adjustment and cable routing. Post-installation leveling is included.
• Superior Mounting Experience: Includes a highly organized hardware kit, drill template, and dust catcher for a hassle-free installation process.

3. Obsah balení

Verify that all components are present before beginning installation. Refer to the included hardware kit for specific screw sizes and quantities.

Image: Kanto TE300 TV Wall Mount components laid out.

• Sestava nástěnné desky
• TV držáky (2)
• Hardware Kit (various screws, washers, spacers, wall anchors)
• Drill Template with Dust Catcher
• Small Level Tool
• Návod k použití

4. Bezpečnostní informace

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact Kanto customer support or a qualified professional installer.

• Nosnost: Do not exceed the maximum weight capacity of 150 lbs (68 kg). This mount is intended for use only with the maximum weights indicated.
• Velikost televizoru: Ensure your TV size is between 43 and 90 inches.
• Typ stěny: This mount is designed for installation on wood stud walls or solid concrete/brick walls. Do not install on drywall alone.
• Nástroje: Use appropriate tools for installation. A stud finder is highly recommended.
• Pomoc: Due to the size and weight of the TV and mount, a minimum of two people are required for safe installation.
• Správa kabelů: Ujistěte se, že všechny kabely jsou bezpečně vedeny a nebrání pohybu držáku.

5. Instalační příručka

Follow these steps carefully for a secure installation. It is recommended to have a second person assist with lifting and positioning the TV.

Step 1: Attach TV Brackets to Your TV

1. Carefully place your TV face down on a soft, clean surface to prevent damage.
2. Identifikujte montážní otvory VESA na zadní straně televizoru.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Refer to your TV's manual for specific requirements.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are oriented correctly (hooks facing upwards) and are securely tightened.

Image: Diagram showing VESA mounting patterns and weight capacity (up to 150 lbs).

Krok 2: Nainstalujte nástěnnou desku

1. Determine the desired height and location for your TV. Use a stud finder to locate two adjacent wood studs or mark the drilling points on a solid concrete/brick wall.
2. Use the provided drill template to mark the pilot hole locations on the wall. Ensure the template is level using the small level tool.
3. Drill pilot holes at the marked locations. For wood studs, use a 1/8 inch (3 mm) drill bit. For concrete/brick, use a 3/8 inch (10 mm) masonry drill bit and insert the concrete anchors.
4. Position the wall plate over the pilot holes and secure it to the wall using the lag bolts and washers. Tighten all bolts firmly, but do not overtighten.

Image: Illustration of the open wall plate design, allowing for mounting over electrical outlets and lateral shift for perfect TV placement.

Krok 3: Zavěste televizor

1. S pomocí opatrně zvedněte televizor a zavěste přiložené držáky televizoru na horní okraj nástěnné desky.
2. Gently lower the TV until the brackets fully engage with the wall plate. The TV should sit securely.
3. Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
4. Perform any post-installation leveling using the horizontal leveling screws on the TV brackets to ensure your screen is perfectly aligned.

Image: Diagram illustrating the 6-inch extension from the wall, horizontal leveling screws, and the slim 2.4-inch profile when pushed back.

6. Návod k obsluze

The Kanto TE300 mount offers flexible viewmožnosti:

Nastavení sklonu

• To adjust the vertical tilt (up to +12° forward or -2° backward), loosen the tilt adjustment knobs located on the TV brackets.
• Opatrně nakloňte televizor do požadovaného úhlu.
• Tighten the tilt adjustment knobs to secure the TV in place.

Adjusting Swivel/Pan

• The mount allows for panning your TV up to 8 degrees left or right.
• Gently push or pull the side of the TV to achieve the desired horizontal viewúhel.

Image: Visual representation of the tilt mechanism (+12°/-2° viewing angle) and up to 8° swivel in either direction for optimal viewIng.

Prodloužení od zdi

• The mount extends up to 6 inches from the wall, providing space to access cables.
• To push the TV closer to the wall, gently guide it back until it sits at its minimum distance of 2.4 inches.

7. Údržba

• Periodically check that all screws and connections are secure. Retighten if necessary.
• Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Ensure that the TV's weight has not shifted or that the wall structure has not been compromised over time.

8. Řešení problémů

• Televizor není vodorovně umístěn: Use the horizontal leveling screws on the TV brackets to make fine adjustments. Ensure the wall plate was installed level initially.
• Obtížnost nastavení náklonu: Loosen the tilt adjustment knobs slightly before attempting to tilt the TV. Retighten once the desired angle is achieved.
• Držák se zdá být nestabilní: Immediately remove the TV from the mount. Recheck all installation steps, especially ensuring the wall plate is securely fastened to studs or concrete with appropriate anchors. Verify the TV's weight does not exceed the mount's capacity.
• Chybějící části: Contact Kanto customer support for assistance.

9. Specifikace

10. Záruka a podpora

Kanto stands behind its products. For warranty information, technical support, or to report missing/damaged parts, please refer to the contact information provided in your product packaging or visit the official Kanto webUschovejte si účtenku jako doklad o koupi pro případ reklamace.