1. Úvod
This manual provides essential information for the safe and effective operation of your HTVRONT Auto Tumbler Heat Press Machine. Designed for sublimation printing, this machine automatically applies ideal pressure for various drinkware, ensuring efficient and high-quality results. Please read these instructions thoroughly before use.
Image: HTVRONT Auto Tumbler Heat Press Machine, showcasinjeho kompaktní design a dodávané příslušenství.
2. Bezpečnostní informace
- Automatické vypnutí: The machine powers down after 15 minutes of inactivity to prevent overheating and conserve energy.
- Nouzové zastavení: Press the 'R' button to instantly halt heating and release the heat pad, ensuring user safety and preventing burns.
- Tepelně odolné rukavice: Always use the provided heat-resistant gloves when handling hot items or the heat press components.
- Větrání: Stroj provozujte v dobře větraném prostoru.
- Povrch: Umístěte termolis na stabilní, žáruvzdorný povrch.
- Nedotýkejte se horkých povrchů: Avoid direct contact with the heating element during and immediately after operation.
- svtage: Ensure the machine is connected to a 120V power outlet.
3. Co je zahrnuto
- Auto Tumbler Heat Press x1
- Heat-resistant Gloves x1 pair
- Heat-resistant Tape x1 roll
- Návod k použití x1
Image: The complete package contents of the HTVRONT Auto Tumbler Heat Press Machine.
4. Specifikace
| Funkce | Hodnota |
|---|---|
| Doporučená použití | Sublimation printing on drinkware (tumblers, mugs, water bottles, sippy cups) |
| Hodnocení vyšší teploty | 390 °F (200 °C) |
| svtage | 120 voltů |
| Wattage | 600 wattů |
| Rozměry produktu | 12.9"D x 10.9"Š x 6.3"V (32.7 cm x 27.7 cm x 16 cm) |
| Hmotnost položky | 10.65 libry (4.84 kg) |
| Compatible Tumbler Diameter | 2.95 palce (7.5 cm) až 3.18 palce (8.1 cm) |
| Compatible Tumbler Volume | 280ml - 850ml (11-30oz) |
| Materiál | ABS shell |
Image: Visual guide for compatible tumbler dimensions and sizes.
5. Nastavení
- Rozbalit: Opatrně vyjměte všechny součásti z obalu. Uschovejte si obal pro budoucí skladování nebo přepravu.
- Umístění: Position the heat press on a flat, stable, and heat-resistant surface in a well-ventilated area.
- Připojení napájení: Connect the power cord to the machine's inlet and then to a standard 120V, 60Hz electrical outlet.
- Počáteční zapnutí: Flip the power switch located at the back of the machine to the 'ON' position. The digital display will illuminate.
6. Návod k obsluze
6.1. Preparing Your Item
- Ensure your tumbler's diameter is between 2.95 and 3.18 inches.
- Omotejte sublimační vzor pevně kolem sklenice a zajistěte jej tepelně odolnou páskou.
6.2. Nastavení teploty a času
- Use the 'Mode' button to cycle through preset temperature and time settings, or manually adjust using the '+' and '-' buttons for temperature and time.
- Refer to the Quick Reference Chart below for recommended settings based on material.
6.3. Pressing Cycle
- Once settings are confirmed, carefully slide the prepared tumbler into the heating chamber. The machine will automatically detect the tumbler and apply appropriate pressure.
- Press the 'Enter' button to begin the heating cycle. The machine will automatically heat and press the design.
- The digital display will show the countdown.
6.4. Removing the Tumbler
- Upon completion of the cycle, the machine will automatically release the pressure and open.
- Wearing heat-resistant gloves, carefully remove the hot tumbler from the machine.
- Allow the tumbler to cool completely before removing the sublimation paper and tape.
Image: Control panel showing temperature and time settings.
6.5. Quick Reference Chart
| Základní materiály | Čas | Teplota |
|---|---|---|
| Sklenička z nerezové oceli | 130±20s | 370°F±10°F |
| Keramický pohárek | 400±20s | 385°F±10°F |
| Skleněný pohárek | 300±20s | 370°F±10°F |
Note: These are general guidelines. Optimal settings may vary based on specific materials and sublimation paper.
7. Údržba
- Čištění: Always unplug the machine and allow it to cool completely before cleaning. Wipe the exterior with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte stroj do vody.
- Skladování: Pokud termolis nepoužíváte, skladujte jej v suchém a bezprašném prostředí.
8. Řešení problémů
- Uneven Heating/Ghosting: Ensure the sublimation paper is tightly wrapped around the tumbler with no gaps or wrinkles. Verify the tumbler diameter is within the recommended range (2.95-3.18 inches) for optimal pressure application.
- Tumbler Difficult to Remove: This may occur with mugs slightly larger than the recommended diameter. Ensure you are using heat-resistant gloves and carefully extract the item. Avoid forcing the tumbler.
- Stroj se nezapíná: Check that the power cord is securely plugged into both the machine and a functioning 120V outlet. Ensure the power switch is in the 'ON' position.
- Funkce automatického vypnutí: If the machine powers off unexpectedly, it may be due to 15 minutes of inactivity. Simply turn it back on.
9. Záruka a podpora
HTVRONT is committed to providing excellent customer service. Should any issues arise with your Auto Tumbler Heat Press Machine, please contact HTVRONT customer support for assistance. They will work to provide a solution to ensure your satisfaction.
For support, please refer to the contact information provided in your product packaging or visit the official HTVRONT webmísto.
