X-PRO 150 Moped User Manual

Zavedení

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your X-PRO 150 Moped. Please read this manual thoroughly before operating the moped to ensure proper use and to prevent injury or damage.

The X-PRO 150 Moped is designed for commuting and casual city riding, featuring a 150cc air-cooled 4-stroke engine, electric start, and 10-inch aluminum wheels.

Bezpečnostní informace

Always wear appropriate safety gear, including a helmet, eye protection, and protective clothing, when operating the moped. Familiarize yourself with all local traffic laws and regulations before riding.

• Do not operate the moped under the influence of alcohol or drugs.
• Perform pre-ride inspections as outlined in this manual.
• Ensure all lights and signals are functioning correctly.
• Udržujte bezpečnou vzdálenost od ostatních vozidel.
• Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození (varování podle návrhu 65).

Nastavení a montáž

Your X-PRO 150 Moped requires some assembly upon arrival. The following components typically require installation:

• Řídítka
• Kola
• Brzdy
• Hub odometer counter
• Baterie
• Zrcadla

Assembly steps may vary slightly by model. Refer to the specific instructions included in your packaging for detailed guidance.

Obraz: The X-PRO 150 Moped as it appears when shipped, secured within a protective metal crate. This packaging ensures the moped's safety during transit.

Obraz: The exterior of the shipping box for the X-PRO moped, featuring the X-PRO logo and handling instructions. This is how the product is received before uncrating.

Důležité: The Manufacturer Statement of Origin (MSO) and Bill of Sale paperwork will be sent separately. Do not attempt to register or title the moped before receiving these documents and confirming the product is satisfactory.

Návod k obsluze

Starting the Moped

1. Ensure the fuel tank contains sufficient octane gasoline.
2. Otočte klíček zapalování do polohy „ON“.
3. Engage the brake lever (typically the left lever for the rear brake).
4. Press the electric start button. If the engine does not start immediately, release the button and try again after a few seconds.
5. Allow the engine to warm up for a short period before riding.

Riding the Moped

• The moped features a twist-grip throttle for acceleration. Twist the grip gently to increase speed.
• Braking is controlled by front and rear brake levers. Apply both brakes smoothly and evenly for effective stopping.
• The 10-inch aluminum wheels contribute to better fuel economy and a smoother ride.
• The large headlight maximizes nighttime visibility.

Obraz: Přední strana view of the white X-PRO 150 Moped, highlighting its design, large headlight, and 10-inch aluminum wheels. This image represents the fully assembled product.

Seat Storage Access

The seat storage compartment is opened using the ignition key switch located at the front of the moped.

Údržba

Regular maintenance is crucial for the longevity and safe operation of your X-PRO 150 Moped.

• Palivo: Always use high-octane gasoline.
• Olej: Regularly check and maintain engine oil levels. Refer to the engine manual for specific oil type and change intervals.
• pneumatiky: Check tire pressure before each ride. Ensure tires are free from damage and have adequate tread depth.
• brzdy: Inspect brake fluid levels and brake pad wear periodically. Adjust or replace as necessary.
• Světla a signály: Verify all lights (headlight, taillights, turn signals) and the horn are functional.
• Spojovací materiál: Pravidelně kontrolujte utažení všech matic, šroubů a spojovacího materiálu.
• Čištění: Clean the moped regularly to prevent corrosion and maintain its appearance.

The muffler cover is designed to prevent accidental injury from hot components. Ensure it is always securely in place.

Odstraňování problémů

This section addresses common issues you might encounter with your X-PRO 150 Moped.

• Motor nenastartuje:
  • Zkontrolujte hladinu paliva.
  • Ensure the ignition key is in the "ON" position.
  • Verify the battery is charged and connections are secure.
  • Confirm the brake lever is engaged when pressing the start button.
• Engine Stalls at Stops:
  • This could indicate an issue with the carburetor tuning or idle speed. Consult a qualified technician.
  • Ensure proper fuel flow and air filter cleanliness.
• Brakes Vibrate:
  • Vibrating brakes may indicate warped brake rotors or worn brake pads. Have the brake system inspected by a professional.
• Ztráta výkonu:
  • Check for clogged fuel filters or air filters.
  • Inspect spark plug condition.
  • Ensure proper carburetor function.

For complex issues or repairs, it is recommended to seek assistance from a certified X-PRO service center or a qualified mechanic.

Specifikace

Obraz: A visual comparison highlighting the aluminum wheels of the X-PRO Bali 150 against standard steel wheels. Aluminum wheels offer benefits such as better fuel economy, improved aesthetics, enhanced damage resistance, and a smoother ride due to their lighter weight and impact absorption properties.

Informace o záruce

The X-PRO 150 Moped comes with a Omezená záruka. The warranty period is typically 1 měsíc from the date of purchase. Please refer to the warranty card included with your product for full terms and conditions, including coverage details and claim procedures.

Keep your purchase receipt and all related documentation as proof of purchase for any warranty claims.

Zákaznická podpora

For technical assistance, parts inquiries, or any other support needs, please contact X-PRO customer service. X-PRO provides dedicated aftermarket service with professional technical support and fast service response.

You can often find support contact information on the official X-PRO webwebu nebo prostřednictvím vaší nákupní platformy.

Poznámka: Ensure you have your model number (150T-6) and purchase details ready when contacting support.