Uživatelská příručka k běžeckému pásu Dskeuzeew 2.5HP Walking Pad

1. Úvod

Thank you for choosing the Dskeuzeew 2.5HP Walking Pad Treadmill. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new fitness equipment. Please read this manual thoroughly before first use and retain it for future reference.

Image: The Dskeuzeew Walking Pad Treadmill, showcasing its compact design and a user engaging in a walking exercise.

2. Nastavení

The Dskeuzeew Walking Pad Treadmill is designed for immediate use with no installation required. It arrives pre-assembled, allowing you to begin your workout shortly after unboxing.

2.1 Rozbalení a počáteční umístění

1. Opatrně vyjměte běžecký pás z obalu.
2. Place the treadmill on a flat, stable surface. Avoid placing it on carpets, as this may affect heat dissipation.
3. Ensure the power cord is accessible to a wall outlet.

2.2 Připojení napájení

• Připojte napájecí kabel k napájecímu vstupu běžeckého pásu.
• Zapojte napájecí kabel do standardní zásuvky.
• Locate the main power switch (often red) on the treadmill and turn it to the "ON" position. The LED display should illuminate.

2.3 Handle Setup (if applicable)

This model features a foldable handle. Ensure it is securely locked in the upright position for use or folded down for under-desk operation or storage.

Image: The Dskeuzeew Walking Pad Treadmill demonstrating its foldable handle for versatile use and storage.

3. Návod k obsluze

3.1 Obsluha dálkového ovladače

The treadmill is primarily controlled via a smart remote control. This remote is magnetic and can be conveniently stored on the side of the treadmill.

• Zapnutí/vypnutí: Press the "ON/OFF" button to start or stop the treadmill. It will typically perform a 3-second countdown before starting.
• Nastavení rychlosti: Use the "+" and "-" buttons to increase or decrease the speed. Speed ranges from 0.6 MPH to 5.0 MPH.
• Výběr režimu: The "M" button allows you to switch between different exercise modes or programs.
• Tlačítka pro rychlý přepínání: Some remotes feature quick-speed buttons (e.g., 2, 3, 4 MPH) for instant speed changes.

Image: Close-up of the treadmill's LED display and the remote control, highlighting key functions.

3.2 Dotykový displej

The integrated LED display shows essential exercise data:

• Rychlost: Aktuální rychlost chůze/běhu.
• Vzdálenost: Celková ujetá vzdálenost.
• Čas: Délka vašeho tréninku.
• Spálené kalorie: Estimated calories consumed during exercise.
• Resetovat: A dedicated button (often far left) can reset time and calories.

3.3 Nastavení sklonu

The treadmill features a manual incline function:

1. Locate the adjustable legs at the rear of the treadmill.
2. Remove the securing pin from the current position.
3. Raise the treadmill to the desired incline level.
4. Insert the securing pin into the higher hole to lock the incline in place.
5. Ensure both sides are adjusted evenly for stability.

4. Údržba

4.1 Mazání běžícího pásu

Regular lubrication of the running belt is crucial for optimal performance and longevity of your treadmill. Use the provided silicone oil.

1. Vypněte a odpojte běžecký pás.
2. Carefully lift the running belt to expose the deck underneath.
3. Apply a small amount of silicone oil evenly across the center of the deck, beneath the belt.
4. Lower the belt and turn on the treadmill at a low speed (e.g., 0.6 MPH) for 3-5 minutes to distribute the lubricant.

4.2 Running Belt Adjustment (Deviation)

If the running belt shifts to one side, it needs adjustment to prevent wear and ensure safe operation. Use the provided hex wrench.

1. Vypněte a odpojte běžecký pás.
2. Identify which side the belt has shifted towards.
3. If the belt has shifted to the právo, insert the hex wrench into the right adjustment hole and rotate 90 degrees clockwise.
4. If the belt has shifted to the vlevo, insert the hex wrench into the left adjustment hole and rotate 90 degrees clockwise.
5. Turn on the treadmill at a low speed (e.g., 1 km/h) and observe the belt. Adjust further in small increments if necessary until the belt is centered.

5. Řešení problémů

• Běžecký pás se nezapíná: Ensure the power cord is securely plugged into both the treadmill and a working wall outlet. Check the main power switch is in the "ON" position.
• Belt shifting/slipping: Refer to the "Running Belt Adjustment" section in Maintenance. Ensure the belt is properly lubricated.
• Neobvyklé zvuky: Check for any loose parts or foreign objects under the belt. Ensure the belt is properly aligned and lubricated. If noises persist, contact customer support.
• Dálkové ovládání nereaguje: Check the battery in the remote control. Ensure there are no obstructions between the remote and the treadmill's sensor.
• Přehřívání: Avoid placing the treadmill on thick carpets which can impede heat dissipation. Ensure adequate ventilation around the motor area.

6. Specifikace

7. Záruka

The Dskeuzeew Walking Pad Treadmill comes with a 2-letá zárukaUschovejte si prosím doklad o koupi pro případné reklamace.

8. Zákaznická podpora

Should you require any assistance with your Dskeuzeew Walking Pad Treadmill, please do not hesitate to contact the Dskeuzeew after-sales service team. They are available to help with any questions or issues you may encounter.

Důležitá poznámka: Carpets will affect the heat dissipation of the Treadmill. Do not place the Treadmill on the carpet.