Návod k obsluze pro zadní hnací kola Toro 98-7135 (balení po 2 ks)

1. Úvod

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your new Toro 98-7135 Rear Drive Wheels. These wheels are designed as direct replacements for specific Toro lawn mower models, ensuring optimal performance and traction. Please read this manual thoroughly before attempting any installation or maintenance procedures.

2. Bezpečnostní informace

Always prioritize safety when working with machinery. Failure to follow these safety guidelines may result in personal injury or damage to equipment.

• Odpojit napájení: Before performing any installation, maintenance, or inspection, ensure the lawn mower's engine is off and the spark plug wire is disconnected to prevent accidental starting.
• Používejte ochranné pomůcky: Vždy používejte vhodné osobní ochranné prostředky, včetně ochranných brýlí a rukavic, abyste se chránili před potenciálním nebezpečím.
• Používejte správné nástroje: Utilize the correct tools for each task to avoid stripping fasteners or causing damage.
• Zajištění sekačky: If lifting the mower, ensure it is securely supported on a stable surface to prevent it from falling.
• Přečtěte si návod k sekačce: Refer to your lawn mower's original owner's manual for specific safety instructions and procedures related to your model.

3. Obsah balení

Po otevření balíku ověřte, zda jsou všechny položky přítomny a nepoškozené:

• 2 x Toro 98-7135 Rear Drive Wheels

Pokud některé součásti chybí nebo jsou poškozené, ihned kontaktujte svého dodavatele.

4. Specifikace

Key specifications for the Toro 98-7135 Rear Drive Wheels:

5. Nastavení a instalace

Follow these steps to replace the rear drive wheels on your Toro lawn mower. Refer to your mower's specific service manual for detailed instructions if available.

1. Příprava sekačky:
   • Ujistěte se, že je motor vypnutý a vychladlý.
   • Odpojte kabel zapalovací svíčky, abyste zabránili náhodnému spuštění.
   • Place the mower on a flat, stable surface. If tilting the mower, ensure the carburetor side is up to prevent fuel leakage.
2. Demontáž starého kola:
   • Locate the retaining bolt or nut securing the wheel to the axle. This is typically found in the center of the wheel.
   • Using an appropriate wrench or socket, loosen and remove the bolt/nut.
   • Carefully pull the old wheel off the axle. Note the position of any washers or spacers for reinstallation.
3. Inspect Axle and Components:
   • Clean any debris from the axle and surrounding area.
   • Inspect the axle for damage or excessive wear.
   • Ensure any existing spacers or washers are clean and in good condition.
4. Instalace nového kola:
   • Align the new Toro 98-7135 wheel with the axle. Ensure the gear side of the wheel faces inward towards the mower deck.
   • Slide the wheel onto the axle, making sure any spacers or washers are correctly positioned.
   • Reinstall the retaining bolt or nut. Tighten it securely, but do not overtighten, as this can damage the wheel or axle.
5. Repeat for Second Wheel: Follow the same steps for the other rear drive wheel.
6. Závěrečná kontrola:
   • Ensure both new wheels are securely attached and spin freely.
   • Znovu připojte kabel zapalovací svíčky.
   • Test the mower's drive system in a safe, open area.

Obrázek 1: Přední strana view of the Toro 98-7135 Rear Drive Wheels, showing the tread pattern and hub design.

Obrázek 2: Zadní strana view of the Toro 98-7135 Rear Drive Wheels, highlighting the integrated metal gear with 42 teeth.

6. Provozní aspekty

While wheels do not have operational controls, proper usage of your lawn mower contributes to their longevity:

• Even Terrain: Operate the mower on relatively even terrain to minimize stress on the wheels and drive system.
• Vyhněte se překážkám: Steer clear of large rocks, roots, or other obstacles that could damage the wheels or tires.
• Správné skladování: Store the mower in a dry, protected area to prevent environmental damage to the rubber and metal components.

7. Údržba

Regular maintenance helps extend the life of your rear drive wheels and ensures consistent performance.

• Pravidelná kontrola: Periodically inspect the wheels for signs of wear, cracks in the rubber, or damage to the gear teeth. Check for any looseness in the wheel attachment.
• Čištění: After each use, remove grass clippings, dirt, and debris from around the wheels and axle area. This prevents buildup that can impede movement or cause premature wear.
• Mazání: Consult your lawn mower's manual for specific lubrication requirements for the axle and wheel bearings. If applicable, apply a small amount of appropriate grease to ensure smooth operation.
• Dezén pneumatiky: Monitor the tire tread. Worn tread can reduce traction, especially on inclines or wet grass. Replace wheels if the tread is significantly worn.

8. Řešení problémů

Address common issues with your rear drive wheels using the following guide:

9. Produktové video

Pro vizuální představu se podívejte na toto videoview of the Toro 98-7135 Rear Drive Wheels, including features and specifications.

10. Záruka a podpora

For warranty information, please refer to the documentation provided by the seller or manufacturer at the time of purchase. If you require technical assistance or have questions regarding the installation or performance of your Toro 98-7135 Rear Drive Wheels, please contact the product seller or Toro customer support directly.

Always provide your product model number (98-7135) and any relevant purchase details when seeking support.