xTool F1 Desktop Smoke Air Purifier Instruction Manual

1. Konec produktuview

The xTool F1 Desktop Smoke Air Purifier is designed exclusively for use with the xTool F1 Laser Engraver. It features a 3-layer filtration system to effectively remove fumes, smoke, and odors generated during laser engraving processes. This unit ensures a cleaner and safer working environment by achieving a 99.97% purification rate.

The purifier is pre-assembled for easy setup and offers intelligent synchronization with the xTool F1 Laser Engraver, starting and stopping automatically with the engraving process. Its compact and portable design, combined with quiet operation (below 55dB), makes it suitable for various indoor environments.

Figure 1.1: The xTool F1 Desktop Smoke Air Purifier, a compact white unit designed for fume extraction.

Figure 1.2: Key features of the xTool Desktop Smoke Air Purifier, highlighting its 3-layer filtration, quiet operation, portability, and adjustable levels.

2. Nastavení

2.1 Obsah balení

Before beginning setup, ensure all components are present in the package:

• Desktop smoke purifier unit
• Filter pack (pre-filter, H13 HEPA filter, activated carbon filter)
• Hose for fume extraction
• Trubkový adaptér
• Napájecí adaptér a napájecí kabel
• USB kabel (typ C)
• Uživatelská příručka

Figure 2.1: Visual representation of all items included in the xTool F1 Desktop Smoke Air Purifier package.

2.2 Connecting the Purifier

1. Connect the provided hose to the exhaust port on the rear of the smoke air purifier.
2. Connect the other end of the hose to the xTool F1 Laser Engraver's exhaust port.
3. Plug the power adapter into the purifier and then into a power outlet.
4. Connect the USB-C cable from the purifier to the xTool F1 Laser Engraver for synchronization.

Figure 2.2: Connection diagram for one-click synchronization between the xTool F1 Laser Engraver and the smoke purifier.

3. Návod k obsluze

3.1 Powering On and Synchronization

Once connected, the smoke air purifier will automatically synchronize with your xTool F1 Laser Engraver. It will start extracting fumes when the engraver begins processing and stop shortly after the engraving process is complete.

Figure 3.1: The smoke air purifier operating in sync with the xTool F1 Laser Engraver.

3.2 Nastavení rychlosti ventilátoru

The purifier features a switch to adjust the fan speed between minimum and maximum settings. Select the appropriate speed based on the material being engraved and the intensity of fumes produced.

Figure 3.2: Fan speed adjustment switch on the side of the purifier.

3.3 Setting Working Time

You can customize the purifier's working time through the xTool Creative Space software. This allows you to extend the purification duration for materials that produce strong smoke or odors, ensuring thorough air cleaning.

4. Údržba

4.1 Výměna filtru

The xTool F1 Desktop Smoke Air Purifier utilizes a 3-layer filtration system consisting of a pre-filter, an H13 HEPA filter, and an activated carbon filter. Regular replacement of these filters is crucial for maintaining optimal purification performance.

The pre-filter should be replaced after approximately 3 pieces are used. The main filtration kit (HEPA and activated carbon) should be replaced periodically based on usage and material types. The intelligent design allows for simple, tool-free filter replacement.

1. Press the button on the top of the unit and remove the lid.
2. Carefully take out the used filtration kit by pulling on the attached ribbons.
3. Insert the new filtration kit into the unit, ensuring it sits securely.
4. Press the lid down firmly until it clicks into place.

Figure 4.1: Step-by-step guide for replacing the filter in the smoke air purifier.

Figure 4.2: Inserting the new filtration kit into the purifier.

4.2 Filtrační systémview

The 3-layer system includes:

• Předfiltr: Captures larger visible particles.
• H13 True HEPA Filter with Double Layers: Filters 99.97% of particles down to 0.3 µm.
• Filtry s aktivním uhlím: Absorbs harmful gases and unpleasant odors.

Obrázek 4.3: Detailní view šestivrstvého filtračního systému.

5. Řešení problémů

For common issues, refer to the following table:

6. Specifikace

• Rozměry produktu: 18.11 x 10.24 x 16.93 inches; 13.23 Pounds (or 1.5"D x 0.85"W x 1.4"H; 6 Kilograms)
• Číslo modelu položky: P5010215
• Výrobce: Makeblock Co., Ltd.
• Barva: Bílý
• Zdroj napájení: AC
• Hladina hluku: No more than 55dB
• Filtrační systém: 3-layer (Pre-filter, H13 HEPA, Activated Carbon)
• Purification Rate: 99.97 %

7. Záruka a podpora

xTool provides a strong warranty and friendly customer service for this air purifier. For detailed warranty information or to contact customer support, please visit the official xTool store or refer to the contact information provided in your user manual.

For additional resources and community support, you may explore the xTool store: xTool Official Store