Zavedení
Thank you for choosing the Silonn SLIM24T Nugget Ice Maker. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read it thoroughly before first use and retain it for future reference.

Obraz: The Silonn SLIM24T Nugget Ice Maker, a silver countertop appliance with a clear lid showing nugget ice, accompanied by a glass of iced tea and orange slices.
Bezpečnostní pokyny
To prevent injury to persons or damage to the appliance, please observe the following safety precautions:
- Ujistěte se, že výrobník ledu je umístěn na stabilním, rovném povrchu mimo dosah přímého slunečního záření a zdrojů tepla.
- Neponořujte spotřebič, napájecí kabel ani zástrčku do vody ani jiných kapalin.
- Při používání spotřebiče dohlížejte na děti.
- Do výrobníku ledu používejte pouze pitnou vodu.
- Před čištěním nebo pokud výrobník ledu delší dobu nepoužíváte, odpojte jej ze zásuvky.
- Do not operate the appliance with a damaged cord or plug. Contact customer support for assistance.
Konec produktuview
The Silonn SLIM24T Nugget Ice Maker is designed to produce soft, chewable nugget ice efficiently. Key features include a one-click operation, self-cleaning function, and clear status indicators.
Komponenty
- Jednotka výrobníku ledu
- Koš na led
- Naběračka ledu
- Uživatelská příručka (tento dokument)
Ovládací panel a indikátory

Obraz: Detailní view of the ice maker's front panel, highlighting the 'ICE CLEAN' button and the visible status indicator lights for intuitive control and clear operational status.
- ICE CLEAN Button: Spustí cyklus samočištění.
- Stavové kontrolky: Provide visual feedback on the ice maker's current state.

Obraz: An illustration showing the ice maker with its status lights, explaining that a green light indicates 'Making ice', a solid green light indicates 'Ice basket full', a blue light indicates 'Self-cleaning', and a red light indicates 'Water tank empty'.
Nastavení
Vybalování
- Opatrně vyjměte výrobník ledu z obalu.
- Odstraňte veškerý balicí materiál, včetně pásky nebo ochranných fólií.
- Inspect the appliance for any damage. If damaged, do not operate and contact customer support.
Umístění
- Place the ice maker on a firm, level countertop or table.
- Zajistěte dostatečné větrání kolem jednotky (alespoň 5 cm volného prostoru na všech stranách).
- Vyhněte se umístění v blízkosti zdrojů tepla nebo na přímém slunci.
- Před zapojením nechte jednotku alespoň 24 hodiny stát ve svislé poloze. To umožní usadit chladivo.
Počáteční čištění
- Před prvním použitím vyčistěte vnitřek výrobníku ledu. Podrobné pokyny k čištění naleznete v části „Údržba“.
- Perform a self-cleaning cycle as described in the 'Maintenance' section.
Návod k obsluze
Přidání vody
- Otevřete víko výrobníku ledu.
- Naplňte nádržku na vodu pitnou vodou po rysku MAX. Nepřeplňujte.
- Bezpečně zavřete víko.
Výroba ledu
- Zapojte výrobník ledu do uzemněné elektrické zásuvky.
- Press the 'ICE CLEAN' button once to start the ice making process. The status indicator will illuminate.
- První várka nugetové zmrzliny bude hotová přibližně za 6 minut.
- The ice maker will continue to produce ice until the ice basket is full or the water reservoir is empty.

Obraz: The Silonn ice maker on a mound of ice, illustrating its capacity to produce 33 pounds of ice daily, equivalent to over 48 cups.
Porozumění indikátorům
- Plný koš s ledem: When the ice basket is full, the ice maker will automatically pause production. The corresponding indicator light will illuminate. Once ice is removed, production will resume.
- Prázdná nádrž na vodu: If the water reservoir is empty, the ice maker will stop production and the 'Water Tank Empty' indicator light will illuminate. Refill the reservoir to resume ice making.

Obraz: A woman smiling while holding a spoon of nugget ice, with text highlighting the benefits of nugget ice: chewable, rapid chilling, and absorbs drink flavors.
Údržba
Regular cleaning and maintenance ensure optimal performance and longevity of your Silonn ice maker.
Funkce samočištění
- Ujistěte se, že nádržka na vodu je naplněna čistou vodou.
- Press and hold the 'ICE CLEAN' button for 3 seconds to activate the self-cleaning mode. The indicator light will turn blue.
- The self-cleaning cycle will run for a set duration, circulating water through the system.
- Once the cycle is complete, drain the water from the reservoir and wipe the interior dry.

Obraz: Průhledný view of the ice maker's internal components, illustrating the water flow during the automatic self-cleaning process.
Manual Cleaning and Descaling
The ice maker features a detachable top for easier access during manual cleaning or descaling.
- Unplug the appliance and remove the ice basket.
- Drain any remaining water from the reservoir.
- Wipe down all accessible interior surfaces with a soft cloth and a mild detergent solution. Rinse thoroughly.
- For descaling, use a solution of water and white vinegar or a commercial descaling agent according to product instructions. Run a cleaning cycle with the descaling solution, then rinse thoroughly by running several cycles with clean water.
- Před opětovnou montáží a uskladněním se ujistěte, že všechny díly jsou suché.
Hard Water Considerations
Hard water can lead to mineral buildup, affecting ice maker performance. Descaling frequency depends on water hardness in your area.

Obraz: A map of the United States indicating regional water hardness levels. It recommends descaling monthly in moderately hard water areas and every two to three weeks in hard to very hard water areas, based on calcium carbonate concentration.
- Moderately Hard Water (61-120mg/L): Descale monthly.
- Hard to Very Hard Water (121-250mg/L): Descale every two to three weeks.
Odstraňování problémů
Pokud se s výrobníkem ledu setkáte s problémy, podívejte se do níže uvedené tabulky, kde najdete běžné problémy a jejich řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Výrobník ledu nevyrábí led. | No water in reservoir; power not connected; ambient temperature too high. | Fill water reservoir; ensure unit is plugged in; operate in a cooler environment. |
| Výroba ledu je pomalá. | Water temperature too high; poor ventilation; mineral buildup. | Use colder water; ensure proper ventilation; descale the unit. |
| Led má neobvyklou chuť nebo vůni. | Unit needs cleaning; stale water. | Perform a thorough cleaning and self-cleaning cycle; use fresh, potable water. |
| Unit is making unusual noises. | Normal operational sounds; mineral buildup. | Some sounds are normal during ice production. If persistent or loud, descale the unit. |
| Status indicator lights are not working. | Problém s napájením; vnitřní závada. | Zkontrolujte připojení k napájení. Pokud problém přetrvává, kontaktujte zákaznickou podporu. |
Specifikace
Technical details for the Silonn SLIM24T Nugget Ice Maker:
| Specifikace | Detail |
|---|---|
| Název modelu | SLIM24T |
| Rozměry produktu | 12.83"H x 14.88"Š x 10.12"V |
| Produkce ledu za den | 33 libry |
| Kapacita | 33 liber (zásobník ledu) |
| Wattage | 300 wattů |
| svtage | 120 voltů |
| Chladivo | R600a |
| Hmotnost položky | 22.7 libry |
| Typ instalace | Pracovní deska |
| Zahrnuté komponenty | Ice Scoop, Ice Basket, User manual |
| UPC | 850054443939 |

Obraz: The Silonn ice maker positioned in a room at night, emphasizing its quiet operation with a noise level of less than 46dB.
Záruka a podpora
Your Silonn SLIM24T Nugget Ice Maker comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Silonn Customer Support. Contact information can typically be found on the product packaging or the official Silonn webmísto.





