1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of the PROFLO PF9312FVPK Dual Flush Valve Assembly. This product is designed for use with PROFLO PF9300 series dual flush tanks, offering an efficient solution for toilet flushing.
2. Bezpečnostní informace
Před instalací a použitím si pečlivě přečtěte všechny pokyny. Nedodržení těchto pokynů může vést k poškození majetku nebo zranění osob.
- Před zahájením jakékoli instalace nebo údržby vždy uzavřete přívod vody do toalety.
- Používejte vhodné osobní ochranné prostředky, jako jsou rukavice a ochrana očí.
- Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
- Udržujte malé části mimo dosah dětí.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- PROFLO PF9312FVPK Dual Flush Valve Assembly
- Vypínací páka
- Veškerý potřebný hardware pro instalaci
Image 1: The PROFLO PF9312FVPK Dual Flush Valve Assembly with its included trip lever and connecting hose.
4. Nastavení a instalace
This dual flush valve assembly is designed for PROFLO PF9300 series dual flush tanks. Ensure your toilet tank is compatible before proceeding.
- Vypněte přívod vody: Locate the water supply valve behind the toilet and turn it clockwise until the water flow stops completely. Flush the toilet to empty the tank.
- Remove Old Flush Valve (if applicable): Disconnect the water supply line from the fill valve. Remove the old flush valve by unscrewing the mounting nut from underneath the tank. Clean the tank opening thoroughly.
- Instalace nového proplachovacího ventilu: Place the new PROFLO PF9312FVPK Dual Flush Valve Assembly into the tank opening from the inside. Ensure the rubber gasket is properly seated. From underneath the tank, thread the mounting nut onto the flush valve and tighten it securely by hand. Do not overtighten.
- Connect Trip Lever: Attach the included trip lever to the designated connection point on the flush valve. Ensure the chain or cable from the trip lever is connected to the flush valve mechanism, allowing for proper activation of the dual flush feature. Adjust the chain/cable length to ensure both flush options operate correctly without excessive slack or tension.
- Znovu připojte přívod vody: Reconnect the water supply line to the fill valve. Turn the water supply valve counter-clockwise to restore water flow to the toilet.
- Zkontrolujte netěsnosti: Allow the tank to fill. Inspect all connections for any signs of leaks. If leaks are present, turn off the water supply and re-tighten connections as needed.
5. Návod k obsluze
The PROFLO PF9312FVPK Dual Flush Valve Assembly provides two flushing options to conserve water:
- Částečné spláchnutí: For liquid waste, gently press and release the trip lever. This activates a reduced water volume flush.
- Plné spláchnutí: For solid waste, press and hold the trip lever down for a few seconds. This activates a full water volume flush.
Familiarize yourself with the feel of each flush option to optimize water usage.
6. Údržba
Regular maintenance ensures optimal performance and longevity of your dual flush valve.
- Čištění: Periodically inspect the flush valve for mineral buildup or debris. Turn off the water supply, drain the tank, and gently clean components with a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage rubber seals.
- Kontrola těsnění: Check the rubber seals and gaskets for wear, cracks, or deterioration. Worn seals can lead to leaks and inefficient flushing. Replace any damaged seals promptly.
- Seřízení páky: Ensure the trip lever operates smoothly and the chain/cable has the correct tension for both flush options. Adjust if necessary.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Toilet runs continuously | Flapper/seal not seating properly; fill valve issue; trip lever chain too tight. | Inspect flush valve seal for debris or wear. Adjust trip lever chain to ensure proper slack. Check fill valve for proper shut-off. |
| Slabé spláchnutí | Insufficient water level; partial blockage; flush valve not opening fully. | Adjust fill valve to increase water level. Check for obstructions in the bowl jets. Ensure trip lever chain allows full opening of the flush valve. |
| Toilet does not flush | Trip lever disconnected; flush valve mechanism jammed. | Reconnect trip lever chain/cable. Inspect flush valve for any obstructions preventing movement. |
| Leaks from tank base | Uvolněná montážní matice; poškozené těsnění. | Turn off water, drain tank, and tighten mounting nut. If leak persists, replace the flush valve gasket. |
If the problem persists after attempting these solutions, contact PROFLO customer support or a qualified plumber.
8. Specifikace
- Model: PF9312FVPK
- Kompatibilita: PROFLO PF9300 series dual flush tanks
- Hmotnost položky: 15.4 unce
- Rozměry produktu: 1 x 1 x 1 inches (Note: These dimensions may refer to packaging or a general placeholder. Actual product dimensions for installation may vary.)
- Výrobce: PROFLO
9. Záruka a podpora
For warranty information or technical support, please refer to the official PROFLO webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.
PROFLO Customer Support: Visit the PROFLO Store on Amazon
