Konec produktuview
The Vortex Direct Boat Cover is designed to provide superior protection for your Harris Pontoon Boat. Constructed from 600d marine-grade canvas, this cover is double-coated with polyurethane for waterproofing and UV protection. Its robust design ensures durability and longevity, engineered to withstand various environmental conditions.
Klíčové vlastnosti:
- Materiál: 600d marine-grade canvas, double polyurethane coated for waterproofing and UV protection.
- Voděodolnost: Fully waterproof, yet allows water vapor to permeate, preventing moisture buildup.
- Konstrukce: Features HD shock cord sewn into the hem for a secure fit and double-stitched seams for enhanced strength and durability.
- příloha: Equipped with a loop & buckle strap system for secure fastening.
- V ceně: Cover, straps, and storage bag.
Bezpečnostní informace
Before installing or using the boat cover, please read and understand all safety instructions. Improper use or installation can lead to damage to the cover or the boat.
- Ensure the boat is clean and free of sharp objects that could puncture the cover.
- Always secure the cover tightly using all provided straps to prevent wind lofting and damage.
- Use a support system (not included) under the cover to prevent water pooling, especially during rain or snow. Water pooling can stretch and damage the cover.
- Do not use the cover while trailering unless specifically designed and rated for trailering. This cover is primarily for storage and mooring.
- Chraňte kryt před otevřeným ohněm nebo extrémními zdroji tepla.
Nastavení a instalace
Follow these steps for proper installation of your Vortex Direct Boat Cover:
- Připravte loď: Ensure the boat is clean and dry. Remove any sharp accessories or loose items that could snag or tear the cover. Lower any antennas or bimini tops.
- Identify Front and Rear: Unfold the cover and identify the front (bow) and rear (stern) ends. The cover is typically shaped to fit the contours of your pontoon boat.
- Umístěte kryt: Drape the cover over the boat, starting from the bow and working towards the stern. Ensure it is centered and evenly distributed.
- Secure the Hem: The HD shock cord sewn into the hem will help secure the cover around the boat's perimeter. Pull the hem down firmly around the rub rail.
- Připevnění popruhů: Utilize the provided loop & buckle strap system. Thread the straps under the boat and through the buckles, tightening them securely. Ensure straps are taut but not overly strained. Distribute tension evenly to prevent stress points.
- Install Support System (Recommended): To prevent water pooling and extend the life of your cover, it is highly recommended to use a support system (e.g., poles or frames) under the cover. This creates a peak, allowing water to run off.
Image: Vortex Direct Boat Cover fully installed on a pontoon boat, showing the overall fit and strap placement.
Obrázek: Detail view of the heavy-duty shock cord integrated into the hem of the boat cover, designed for a secure and snug fit around the boat.
Obrázek: Podrobný view of the loop and buckle strap system, illustrating how the straps are designed to secure the boat cover firmly in place.
Pokyny pro provoz a použití
The Vortex Direct Boat Cover is designed for storage and mooring. Adhering to these guidelines will maximize its effectiveness and lifespan:
- Pravidelná kontrola: Periodically check the cover for proper tension and security, especially after strong winds or heavy precipitation.
- Water Runoff: Ensure that water is not pooling on the cover. If pooling occurs, adjust the support system or the cover's position to facilitate drainage.
- Větrání: While the cover is breathable, ensure adequate air circulation around the boat to prevent mildew growth, especially in humid environments.
- Odstranění: When removing the cover, unbuckle all straps first, then carefully lift the cover off the boat, folding it neatly for storage in the provided bag.
Údržba a péče
Proper maintenance will extend the life and performance of your boat cover:
- Čištění: Clean the cover periodically with mild soap and water. Use a soft brush to remove dirt, mildew, or stains. Rinse thoroughly with clean water and allow it to air dry completely before folding and storing. Do not use harsh chemicals or abrasive cleaners.
- Skladování: When not in use, store the dry cover in its storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Opravy: For minor tears or punctures, use a marine-grade repair kit suitable for canvas. For significant damage, professional repair may be necessary.
- UV ochrana: While the cover is UV protected, prolonged exposure to intense sunlight can eventually degrade any fabric. Regular cleaning and proper storage when not in use will help maintain its UV resistance.
Image: Close-up detail of the double-stitched seams on the boat cover, highlighting the reinforced construction for enhanced strength and durability.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Hromadění vody na krytu | Insufficient support or improper tension. | Install or adjust a support system under the cover to create a peak. Ensure straps are evenly tightened. |
| Cover flapping in wind | Straps are not tight enough or not all straps are used. | Re-tighten all straps securely. Ensure the hem shock cord is snug around the boat. |
| Růst plísní | Lack of ventilation or cover stored wet. | Clean the cover with a mild mildew remover. Ensure the boat and cover are completely dry before covering or storing. Improve ventilation if possible. |
| Small tears or abrasions | Contact with sharp objects or excessive friction. | Inspect the boat for sharp edges. Repair small tears with a marine-grade patch kit. |
Specifikace
| Atribut | Detail |
|---|---|
| Značka | Vír |
| Číslo modelu | HARRIS26ULGREY1 |
| Materiál | 600d Marine Grade Canvas |
| Povlak | Double Polyurethane Coated (Waterproof & UV Protected) |
| Barva | Šedá |
| Hmotnost položky | 20 libry |
| Rozměry produktu (D x Š x V) | 216 x 102 x 36 palce |
| Úroveň odolnosti proti vodě | Water Repellent (effectively waterproof) |
| Zahrnuté komponenty | Cover, Straps, Storage Bag |
Informace o záruce
Vortex Direct offers a comprehensive 5-letá záruka on this boat cover. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
The warranty reflects the engineered lifespan of the cover, ensuring long-term protection for your investment. For specific warranty terms and conditions, please refer to the official Vortex Direct warranty policy or contact customer support.
Zákaznická podpora
For any questions, assistance with installation, troubleshooting, or warranty claims, please contact Vortex Direct customer support:
- Online podpora: Navštivte Vortex Brand Store on Amazon pro informace o produktech a možnosti kontaktování.
- Kontakt na prodejce: You can also contact the seller, Vortex Direct, directly through the Amazon platform for order-specific inquiries.
We are committed to providing excellent service and support for your Vortex Direct Boat Cover.
