Uživatelská příručka k elektrickému otvíráku na víno a řezačce fólie Brookstone

1. Úvod

This manual provides instructions for the safe and efficient use of your Brookstone Electric Wine Opener and Foil Cutter. This device is designed for effortless removal of corks from wine bottles, suitable for both natural and synthetic corks. Please read all instructions carefully before use.

2. Komponenty produktu

• Electric Wine Opener Unit
• Foil Cutter / Stand

Image: The Brookstone Electric Wine Opener unit with its accompanying foil cutter and stand.

3. Nastavení

3.1 Instalace baterie

The Brookstone Electric Wine Opener requires 4 AA batteries for operation (batteries are not included). To install the batteries:

1. Locate the battery compartment cover on the back of the wine opener unit.
2. Sejměte kryt.
3. Vložte 4 baterií typu AA a dbejte na správnou polaritu (+/-) vyznačenou uvnitř přihrádky.
4. Nasaďte kryt přihrádky na baterie zpět, dokud bezpečně nezacvakne.

Image: The base of the electric wine opener showing the battery compartment and a visual representation of 4 AA batteries.

4. Návod k obsluze

4.1 Removing the Foil Seal

Before opening the wine bottle, the foil seal must be removed.

1. Place the foil cutter on top of the wine bottle, gripping it firmly.
2. Squeeze the sides of the foil cutter and rotate it around the bottle neck to cut the foil.
3. Remove the foil cutter and discard the foil.

Image: The foil cutter, which also serves as a stand for the wine opener, shown next to a wine bottle.

4.2 Opening the Wine Bottle

With the foil seal removed, you can now open the bottle.

1. Umístěte elektrický otvírák na víno svisle na láhev s vínem a ujistěte se, že je vystředěn nad korkem.
2. Hold the bottle firmly with one hand and the opener with the other.
3. Press and hold the 'Down' button. The corkscrew will automatically rotate to penetrate the cork and pull it out of the bottle.
4. The opener will stop automatically once the cork is fully extracted. Lift the opener away from the bottle.

4.3 Releasing the Cork

To release the cork from the opener:

1. Hold the wine opener away from the bottle.
2. Press and hold the 'Up' button. The corkscrew will rotate in the opposite direction, releasinkorek.
3. The cork will detach from the opener.

Image: A visual guide demonstrating the steps for removing the foil, placing the opener, pressing the 'Down' button to extract the cork, and pressing the 'Up' button to release it.

5. Údržba

5.1 Čištění

Wipe the exterior of the wine opener and foil cutter with a soft, damp cloth. Do not immerse the unit in water or other liquids. Do not use abrasive cleaners.

5.2 Výměna baterie

When the opener's performance diminishes, replace all 4 AA batteries with new ones. Refer to Section 3.1 for battery installation instructions.

6. Řešení problémů

• Opener does not work: Ujistěte se, že jsou baterie správně vloženy a nejsou vybité. V případě potřeby baterie vyměňte.
• Cork does not come out: Ensure the opener is centered on the bottle and held firmly. The corkscrew may not have fully engaged the cork. Try again, applying gentle downward pressure.
• Cork breaks: This can occur with older or fragile corks, or if the opener is not perfectly centered. Carefully remove any remaining cork pieces from the bottle.
• Batteries drain quickly: Ensure the unit is turned off when not in use. If the issue persists, consider using high-quality alkaline batteries.

7. Specifikace

8. Záruka a podpora

Informace o záruce a zákaznické podpoře naleznete v dokumentaci dodané s vaším produktem nebo navštivte oficiální webové stránky Brookstone. webmísto. Můžete také navštívit Obchod Brookstone na Amazonu for more product details.