Návod k obsluze mechanického časovače Fosmon C-10681 s 24hodinovým časovačem s dvojitou zásuvkou

1. Úvod

This manual provides instructions for the safe and efficient operation of your Fosmon C-10681 24-Hour Dual Outlet Mechanical Timer. This device is designed to automate the on/off cycles of connected electrical appliances, offering convenience and potential energy savings. Please read this manual thoroughly before use and retain it for future reference.

2. Bezpečnostní informace

• Pouze k použití v interiéru. Nevystavujte vodě ani vlhkosti.
• Do not exceed the electrical ratings: 125VAC, 15A, 1875W, 10A Tungsten, 3/4HP.
• Ensure the timer is securely plugged into a grounded 3-prong outlet.
• Do not use with appliances that could cause hazardous conditions if left unattended (e.g., heating appliances, power tools).
• Uchovávejte mimo dosah dětí.
• Zařízení nerozebírejte ani neupravujte.

3. Konec produktuview

The Fosmon C-10681 is a mechanical timer featuring a 24-hour dial with multiple push pins for programming. It includes dual outlets to control two devices simultaneously.

Obrázek 1: Přední a boční view of the Fosmon C-10681 timer.

Figure 2: The timer features dual outlets for connecting two devices.

4. Pokyny k nastavení

1. Obnovení pinů: When new, all pins around the dial are typically pressed down. Pull all pins UP to the OFF position before programming.
2. Nastavit aktuální čas: Rotate the entire dial clockwise until the arrow labeled "TIME NOW" points to the current time. The dial is marked with AM (white section) and PM (black section) hours.
3. Časy zapnutí/vypnutí programu: Push the pins DOLŮ for the periods you want the connected device(s) to be ON. Each pin represents a 30-minute interval. For example, to turn a device on from 6:00 PM to 11:00 PM, push down all pins between 6 PM and 11 PM.
4. Aktivace režimu časovače: Locate the slide switch on the side of the timer. Slide it to the ČASOVAČ (clock icon) position to enable programmed operation. If you want the device to be continuously ON, slide the switch to the ON pozice.
5. Připojit: Plug the timer into a grounded 3-prong wall outlet. Then, plug your appliance(s) into the dual outlets on the timer.

Figure 3: The timer dial with 30-minute interval pins for programming.

5. Návod k obsluze

Once programmed and plugged in, the timer's dial will continuously rotate. When the current time aligns with a section where pins are pushed DOLŮ, power will be supplied to the connected devices. When the current time aligns with a section where pins are pulled UP, power will be cut off. The settings will repeat daily.

6. Applications and Usage

This timer is suitable for a variety of indoor applications to automate electrical devices:

• Osvětlení: Lamps, indoor lights, Christmas lights, holiday decorations.
• Spotřebiče: Small appliances, fans, humidifiers, coffee machines.
• Specialita: Reptile lights, grow lights, aquarium fish tanks.

Figure 4: The timer is compatible with a wide range of household devices.

Figure 5: Automating devices with the timer can help reduce energy consumption.

Figure 6: The timer supports various bulb types including CFL, Incandescent, and LED.

7. Údržba

• Wipe the timer with a dry, soft cloth to clean. Do not use liquid cleaners.
• Před čištěním se ujistěte, že je časovač odpojený ze zásuvky.
• Pokud se nepoužívá, skladujte na chladném a suchém místě.

8. Řešení problémů

• Device not turning ON/OFF at programmed times:
  • Check if the slide switch is set to the ČASOVAČ pozice.
  • Verify that the current time on the dial is correctly aligned with the "TIME NOW" arrow.
  • Ensure the pins for the desired ON/OFF periods are correctly pushed down (ON) or pulled up (OFF).
  • Confirm the timer is securely plugged into a live wall outlet and the appliance(s) are properly connected to the timer.
• Timer not keeping accurate time after a power outage:
  • Mechanical timers typically do not have a battery backup. After a power interruption, you will need to manually reset the current time on the dial to ensure accurate future operation.

9. Specifikace

Figure 7: The Fosmon C-10681 timer is ETL Listed for safety and quality.

10. Záruka a podpora

Fosmon products are designed with quality and safety in mind. For any questions or assistance, please contact Fosmon customer support. Information regarding warranty coverage can typically be found on the manufacturer's webmísto nebo obal produktu.