Konec produktuview
The Artika Vester LED Vanity Light (model VAN-VE-CR) is a modern, chrome-finished lighting fixture designed for indoor damp locations, such as bathrooms. It features integrated LED technology, offering 1900 lumens of bright, 3000K warm white light with a long lifespan of 50,000 hours. This fixture is dimmable and controlled via a remote.
Obrázek: Přední strana view of the Artika Vester LED Vanity Light, showcasing its chrome finish and linear design.
Nastavení a instalace
This section provides general guidelines for installing the Artika Vester LED Vanity Light. Professional installation is recommended. Always ensure the power supply is turned off at the circuit breaker before beginning any electrical work.
Požadované nástroje (nejsou součástí dodávky):
- Šroubovák (Phillips a plochý)
- Odizolovače drátů
- Elektrická páska
- Ochranné brýle
- svtage Tester
Kroky instalace:
- Vypnout napájení: Locate the circuit breaker controlling the light fixture's power supply and switch it to the OFF position. Verify power is off using a voltage tester.
- Odstraňte staré zařízení: Carefully remove any existing light fixture from the wall. Disconnect all wires and remove the mounting bracket.
- Instalace montážního držáku: Attach the new mounting bracket (supplied with the Vester light) to the electrical junction box on the wall using the provided screws. Ensure it is securely fastened.
- Kabelová připojení: Connect the electrical wires from the fixture to the corresponding wires from the junction box. Typically, connect the black wire (live) from the fixture to the black wire from the junction box, the white wire (neutral) from the fixture to the white wire from the junction box, and the ground wire (bare copper or green) from the fixture to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Namontujte přípravek: Carefully align the Vester LED Vanity Light with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Obnovit napájení: Jakmile je svítidlo bezpečně nainstalováno, znovu zapněte napájení na jističi.
No specific installation videos are available for this product. Please refer to the written instructions and consult a qualified electrician if you are unsure about any steps.
Návod k obsluze
The Artika Vester LED Vanity Light is designed for simple operation using its included remote control.
Funkce dálkového ovládání:
- Vypínač: Stisknutím zapnete nebo vypnete světlo.
- Tlačítka pro stmívání: Use the '+' and '-' buttons to increase or decrease the brightness level of the light. The Vester light is fully dimmable.
Ensure the remote control has working batteries and is pointed towards the light fixture for optimal response. The light operates at a fixed color temperature of 3000K (warm white).
Údržba
The Artika Vester LED Vanity Light requires minimal maintenance due to its durable construction and long-lasting integrated LED components.
Čištění:
- Před čištěním vždy vypněte napájení svítidla jističem.
- Použijte měkký, suchý nebo mírně damp hadřík k otření vnějších povrchů svítidla.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Do not spray cleaning solutions directly onto the fixture.
LED Components:
The LED light source in this fixture is integrated and not user-replaceable. With an average lifespan of 50,000 hours, regular replacement is not anticipated.
Odstraňování problémů
If you encounter issues with your Artika Vester LED Vanity Light, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Zařízení není napájeno. | Check the circuit breaker and wall switch. Ensure power is ON. |
| Uvolněné kabelové spoje. | Turn off power at the breaker. Inspect wire connections inside the junction box and re-secure if loose. | |
| Baterie dálkového ovládání je vybitá. | Vyměňte baterii v dálkovém ovladači. | |
| Světlo nečekaně bliká nebo ztlumuje. | Nekompatibilní stmívač. | Ensure you are using an LED-compatible dimmer switch. Consult a qualified electrician. |
| Uvolněné kabelové spoje. | Turn off power at the breaker. Inspect wire connections and re-secure. | |
| Dálkové ovládání nereaguje. | Remote battery is dead or low. | Vyměňte baterii dálkového ovládání. |
| Překážka mezi dálkovým ovladačem a svítidlem. | Ensure a clear line of sight between the remote and the light fixture. |
Pokud tyto kroky problém nevyřeší, kontaktujte prosím zákaznickou podporu.
Specifikace
| Značka | Artika |
| Číslo modelu | VAN-VE-CR |
| Rozměry produktu | 27" D x 4.4" Š x 4.4" V |
| Wattage | 21 wattů |
| svtage | 120 voltů |
| Jas | 1900 XNUMX lumenů |
| Teplota barev (CCT) | 3000K (teplá bílá) |
| Index podání barev (CRI) | 80 |
| Průměrný život | 50,000 hodiny |
| Materiál | Legovaná ocel, plast |
| Typ montáže | Držák na zeď |
| Kontrolní metoda | Dálkové ovládání |
| Hodnocení polohy | Damp Location (Indoor) |
| UPC | 846979036677 |
Informace o záruce
Specific warranty details for the Artika Vester LED Vanity Light (VAN-VE-CR) are typically provided with the product packaging or available on the manufacturer's official website. Please retain your proof of purchase for warranty claims. For detailed information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the Artika webmísto.
Podpora
For further assistance, technical support, or to inquire about replacement parts, please contact Artika customer service. You can typically find contact information on the manufacturer's webna místě nebo v obalu produktu.
You may also visit the official Artika store on Amazon for product information and updates: Artika Store on Amazon
