Zavedení
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
Nastavení a instalace
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
Kroky před instalací:
- Vyberte teplotu barev: Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- Sbírejte nástroje: Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
Kroky instalace:
- Instalace montážního držáku: Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- Připojení kabeláže: Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Připevnění svítidla: Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- Obnovit napájení: Jakmile je svítidlo bezpečně nainstalováno, obnovte napájení jističem.
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
Návod k obsluze
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
Provozní režimy:
The light fixture features a slide switch on the side to select between three operating modes:
- Režim ON: The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- Režim VYPNUTO: Světlo je vypnuté.
- AUTO režim: This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
Nastavitelné nastavení časovače:
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30 sekund
- 120 sekund
- 180 sekund
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
Výběr teploty barev:
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
Údržba
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- Čištění: Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Inspekce: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
- Výměna žárovky: This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
Odstraňování problémů
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Žádné napájení. Byl vybrán nesprávný režim. Sufficient ambient light (in AUTO mode). | Zkontrolujte jistič a nástěnný vypínač. Ensure the mode switch is set to 'ON' or 'AUTO'. In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| Pohybový senzor nedetekuje pohyb. | Light is not in 'AUTO' mode. Obstruction in detection area. Okolní světlo je příliš vysoké. Motion is outside detection range/angle. | Ensure the mode switch is set to 'AUTO'. Odstraňte všechny předměty, které blokují senzor view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| Světlo zhasne příliš rychle nebo svítí příliš dlouho. | Nesprávné nastavení časovače. | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
Specifikace produktu
| Funkce | Detail |
|---|---|
| Značka | KEPLUG |
| Název modelu | motion sensor ceiling light |
| Rozměry produktu | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| Hmotnost položky | 2.01 liber (0.91 kilogramů) |
| Wattage | 18 wattů |
| Jas | 1600 XNUMX lumenů |
| Teplota barev | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| Zdroj napájení | AC (Hardwired) |
| svtage | 110 voltů |
| Speciální funkce | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| Úhel detekce pohybového senzoru | 120 stupňů |
| Dosah detekce pohybového senzoru | 9–18 stop (přibližně 3–5 metrů) |
| Typ instalace | Zapuštěná montáž |
| Materiál | ABS plast |
| Vnitřní/venkovní použití | Krytý |
| Životnost | Více než 30,000 XNUMX hodin |
| Zahrnuté komponenty | Montážní hardware |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
Informace o záruce
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
Zákaznická podpora
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG webweb. Při kontaktování podpory si prosím připravte číslo modelu produktu a datum zakoupení.
